--- title: "Fastener Application Guides" description: "Browse every fastener application guide on engineeringhardware.com — real-world uses, selection criteria and industry breakdown for hex bolts, socket screws, nuts, washers, pins, rivets and more." url: https://engineeringhardware.com/applications/ source: Engineering Hardware & Fasteners --- # Fastener Application Guides Application guides One application-focused guide for every fastener in the catalog. Each guide explains real-world uses, an industry breakdown, how to specify the part for your job, and where it is not the right fit. Pick a category to browse, or jump straight to a product. Bolts Hex, reduced-shank, flange, square-head, carriage, shoulder, T-slot and structural bolts plus studs, trapezoidal and threaded rods — metric ISO/DIN and inch ASME series. 71 application guides Screws Socket, Torx (hexalobular), countersunk, oval, pan, cheese, fillister, truss and button head screws, set screws, thumb screws, and self-tapping, thread-forming and wood screws in metric and inch series. 113 application guides Nuts Hex, thin, high, flange, nylon-insert and all-metal lock nuts, fine-thread nuts, weld, cap, square, slotted, coupling, wing, T-slot and profile nuts, in metric and inch series. 95 application guides Washers Flat washers in small, normal, large and extra-large series, clevis-pin and clamping washers, spring, tooth, conical, spherical, sealing and non-metallic washers. 47 application guides Nails Wire, lost-head, flat-head machine, clout and large-head panel nails, screw-shank nails, gas drive pins and specialty spikes and staples. 11 application guides Pins Parallel, dowel, taper, grooved, coiled and slotted spring, clevis and cotter pins, plus quick-release, indexing and spring plungers. 39 application guides Rivets Blind (pop), structural, solid, semi-tubular, drive and plastic rivets, lockbolts and panel clips. 23 application guides Tools The tools that install what the catalog sells: hex and Torx keys, driver bits, bit sockets and nut drivers, taps and dies, thread gauges, circlip pliers, rivet-nut and insert setting tools, and torque wrenches to ISO 6789. 19 application guides Retaining Rings External and internal retaining rings (circlips) to DIN 471 / DIN 472, E-clips to DIN 6799, spiral rings, wave circlips that take out end float, and reinforced grip rings for high shaft speeds. 6 application guides Keys Parallel, Woodruff, taper, gib-head and feather machine keys to DIN 6885, DIN 6886, DIN 6887 and DIN 6888 — selected by shaft diameter and by whether the hub must clamp, locate or slide. 5 application guides Springs Compression, extension and torsion springs to DIN 2098 / 2097 / 2089. 5 application guides Threaded Inserts Helical wire thread inserts (thread repair / reinforcement) to DIN 8140. 6 application guides Pipe & Pneumatic Fittings BSP and NPT pipe-thread fittings, hydraulic compression and JIC 37-degree flare fittings, push-in pneumatic fittings, grease nipples to DIN 71412 and socket pipe plugs to DIN 906 / DIN 908. 7 application guides Bearings & Bushings Ball, roller, thrust, housed and rod-end bearings plus flanged bushings. 9 application guides Rigging Hardware Wire rope, thimbles, turnbuckles and wire-rope clips for lifting and tensioning assemblies. 7 application guides Seals Metric O-rings to ISO 3601 and AS568 inch O-rings, bonded and self-centring USIT seal rings, PTFE thread seal tape and anaerobic thread sealants — selected by cross-section, compound and the fluid they must survive. 6 application guides General Components Source CAD components that do not fit a standard fastener family. 1 application guide Shaft Collars Set-screw collars to DIN 705, one- and two-piece clamp collars that grip without marking the shaft, and threaded collars for adjustable stops — for axial location of components on a shaft. 4 application guides Standoffs & Spacers Threaded and unthreaded standoffs, spacers and precision shims used to set and hold a fixed gap between two parts. 14 application guides Anchors & Concrete Fixings Mechanical and chemical anchors that create a load-bearing threaded fixing in concrete, masonry and hollow board — selected by drilled hole diameter, embedment depth and the thickness of the fixture being held. 27 application guides Supports, Clamps & Brackets Pipe clips, beam clamps and structural brackets that carry or reinforce a run while separate screws, bolts or rods make the final fastening. 14 application guides Clamps & Couplings Hose, band, V-band and sanitary clamps — selected by clamp range and band width rather than by thread size. 7 application guides Cable & Cord Management Ties, tie mounts, strain-relief bushings and cordgrips that route and secure cable at a panel or a fixing point. 10 application guides Panel Latches & Catches Cam, compression and draw latches that close and seal an enclosure door, selected by panel cutout and grip range. 7 application guides ## Bolts - [12-Point Flange Screws 12-Point Flange Screws ASME B18.2.3.11M](https://engineeringhardware.com/applications/twelve-point-flange-screws/) - [Anchor Rods (ASTM F1554) Anchor Rods ASTM F1554](https://engineeringhardware.com/applications/anchor-rods-astm-f1554/) - [Bicycle Bottle-Cage, Rack and Fender Bolts Bicycle Bolts Trade series (bicycle mounting bolts)](https://engineeringhardware.com/applications/bicycle-bottle-cage-rack-and-fender-bolts/) - [Bicycle Brake Caliper Mounting Bolts Bicycle Caliper Bolts Trade series (bicycle caliper mounting bolts)](https://engineeringhardware.com/applications/bicycle-brake-caliper-mounting-bolts/) - [Bicycle Cleat Fixing Bolts Bicycle Bolts Trade series (bicycle cleat bolts)](https://engineeringhardware.com/applications/bicycle-cleat-fixing-bolts/) - [Bicycle Disc Brake Rotor Bolts Bicycle Bolts Trade series (bicycle rotor bolts)](https://engineeringhardware.com/applications/bicycle-disc-brake-rotor-bolts/) - [Bicycle Stem and Headset Bolts Bicycle Bolts Trade series (bicycle stem bolts)](https://engineeringhardware.com/applications/bicycle-stem-and-headset-bolts/) - [Brake Bleeder Screws Brake Bleeder Screws Trade series (brake bleeder screws)](https://engineeringhardware.com/applications/brake-bleeder-screws/) - [Carriage Bolts Carriage Bolts DIN 603](https://engineeringhardware.com/applications/carriage-bolts/) - [Carriage Bolts, UNC Carriage Bolts ASME B18.5](https://engineeringhardware.com/applications/asme-b18-5-2-unc-carriage-bolt/) - [Clamping Handle Screw (Long) — DIN 6336 / GN 313 (Series 044) Clamping Handle Bolts DIN 6336 / GN 313](https://engineeringhardware.com/applications/cad-svg-044-handbolt/) - [Clamping Handle Screw (Medium) — DIN 6336 / GN 313 (Series 043) Clamping Handle Bolts DIN 6336 / GN 313](https://engineeringhardware.com/applications/cad-svg-043-handbolt/) - [Clamping Handle Screw (Short) — DIN 6336 / GN 313 (Series 042) Clamping Handle Bolts DIN 6336 / GN 313](https://engineeringhardware.com/applications/cad-svg-042-handbolt/) - [Double-End Studs (DIN 938 / 939 / 940) Studs & Threaded Rods DIN 938](https://engineeringhardware.com/applications/double-end-studs-din-938/) - [Electrical Grounding Screws Electrical Grounding Screws Trade series (electrical grounding screws)](https://engineeringhardware.com/applications/electrical-grounding-screws/) - [Elevator Bolts Elevator Bolts Trade series (bucket-elevator practice)](https://engineeringhardware.com/applications/elevator-bolts/) - [Embedded Anchor Bolts (GB/T 799 / DIN 529) Embedded Anchor Bolts GB/T 799-2020 / DIN 529](https://engineeringhardware.com/applications/embedded-anchor-bolts-gb-t-799-din-529/) - [Equal-End Stud Bolt — GB/T 901 / DIN 939 (Series 093) Studs & Rods, Drawing Series GB/T 901 / DIN 939](https://engineeringhardware.com/applications/cad-svg-093-stud/) - [Expansion Blind Fasteners for Hollow Section Structural Blind Bolts Trade series (expansion blind fasteners)](https://engineeringhardware.com/applications/expansion-blind-fasteners-for-hollow-section/) - [Eye Bolts Eye Bolts DIN 580](https://engineeringhardware.com/applications/eye-bolts/) - [Eye Swing Bolts Eye Swing Bolts Trade series (rotatable eye swing bolts)](https://engineeringhardware.com/applications/eye-swing-bolts/) - [Fine-Thread Hex Flange Bolts, Small Series Hex Flange Bolts ISO 15072](https://engineeringhardware.com/applications/iso-15072-fine-thread-hex-flange-bolt-small-series/) - [Fine-Thread Hex Head Cap Screws, Fully Threaded Fine Pitch Hex Bolts ISO 8676 / DIN 961](https://engineeringhardware.com/applications/din-961-iso-8676-fine-thread-fully-threaded-hex-cap-screw/) - [Fitted (Reamer) Bolts, DIN 609 Fitted (Reamer) Bolts DIN 609](https://engineeringhardware.com/applications/fitted-bolts-din-609/) - [Foundation Bolts, L and J Form Foundation & Anchor Bolts Trade series (cast-in holding-down bolt)](https://engineeringhardware.com/applications/foundation-bolts-l-j/) - [Heavy Hex Structural Bolts Heavy Hex Structural Bolts ASTM F3125 Grade A325](https://engineeringhardware.com/applications/heavy-hex-structural-bolts/) - [Hex Bolt — GB/T 5782 / ISO 4014 (Series 006) Hex Bolts, Drawing Series GB/T 5782 / ISO 4014](https://engineeringhardware.com/applications/cad-svg-006-hexbolt/) - [Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) Hex Bolts, Drawing Series GB/T 5783 / ISO 4017](https://engineeringhardware.com/applications/cad-svg-010-hexbolt/) - [Hex Bolt — GB/T 6173 / ISO 8675 (Series 057) Hex Bolts, Drawing Series GB/T 6173 / ISO 8675](https://engineeringhardware.com/applications/cad-svg-057-hexbolt/) - [Hex Bolt, Fully Threaded — GB/T 5783 / ISO 4017 (Series 011) Hex Bolts, Drawing Series GB/T 5783 / ISO 4017](https://engineeringhardware.com/applications/cad-svg-011-hexbolt/) - [Hex Bolts Hex Bolts ISO 4014 / ISO 4017](https://engineeringhardware.com/applications/hex-bolts/) - [Hex Bolts, Fine Pitch Fine Pitch Hex Bolts ISO 8765](https://engineeringhardware.com/applications/hex-bolts-fine-pitch/) - [Hex Bolts, Grade C Hex Bolts ISO 4016](https://engineeringhardware.com/applications/hex-bolts-grade-c/) - [Hex Flange Bolts Hex Flange Bolts ISO 1665 / DIN 6921](https://engineeringhardware.com/applications/hex-flange-bolts/) - [Hex Flange Head Cap Screws, UNC Hex Flange Bolts ASME B18.2.1](https://engineeringhardware.com/applications/asme-b18-2-1-8-unc-hex-flange-cap-screw/) - [Hex Head Bolt — GB/T 5782 / ISO 4014 (Series 001) Hex Bolts, Drawing Series GB/T 5782 / ISO 4014](https://engineeringhardware.com/applications/cad-svg-001-hexbolt/) - [Hex Head Bolt, Fully Threaded — GB/T 5783 / ISO 4017 (Series 012) Hex Bolts, Drawing Series GB/T 5783 / ISO 4017](https://engineeringhardware.com/applications/cad-svg-012-hexbolt/) - [Hex Head Bolts with Reduced Shank Hex Bolts ISO 4015](https://engineeringhardware.com/applications/iso-4015-hex-head-bolt-reduced-shank/) - [Hex Head Cap Screws, Fully Threaded, Grade C Hex Bolts ISO 4018](https://engineeringhardware.com/applications/iso-4018-fully-threaded-hex-head-cap-screw-grade-c/) - [Hex Head Cap Screws, UNC Hex Bolts ASME B18.2.1](https://engineeringhardware.com/applications/asme-b18-2-1-6-unc-hex-head-cap-screw/) - [Hydraulic Banjo Bolts Hydraulic Banjo Bolts Trade series (hydraulic banjo bolts)](https://engineeringhardware.com/applications/hydraulic-banjo-bolts/) - [Inch Fully Threaded Rod, ASTM A193 B7 Studs & Threaded Rods ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1](https://engineeringhardware.com/applications/inch-fully-threaded-rod-astm-a193-b7/) - [Inch Hex-Socket Shoulder Screws Shoulder Bolts ASME B18.3](https://engineeringhardware.com/applications/inch-hex-socket-shoulder-screws/) - [Inch Left-Hand Fully Threaded Rod Studs & Threaded Rods ASME B18.31.3 and ASME B1.1 LH](https://engineeringhardware.com/applications/inch-left-hand-fully-threaded-rod/) - [Inch Slotted Shoulder Screws Shoulder Bolts Trade series (inch shoulder screws)](https://engineeringhardware.com/applications/inch-slotted-shoulder-screws/) - [Lag Screws (Hex Wood Screws) Lag Screws (Hex Wood Screws) DIN 571](https://engineeringhardware.com/applications/lag-screws-hex-wood-screws/) - [Left-Hand Thread Hex Bolts Left-Hand Thread Bolts DIN 933](https://engineeringhardware.com/applications/left-hand-thread-hex-bolts/) - [Lifting Eye Bolt — DIN 580 / GB/T 825 (Series 020) Eye Bolts, Drawing Series DIN 580 / GB/T 825](https://engineeringhardware.com/applications/cad-svg-020-eyebolt/) - [Male-to-Female Thread Adapters Male-to-Female Thread Adapters Trade series (male-to-female thread adapters)](https://engineeringhardware.com/applications/male-to-female-thread-adapters/) - [Plow Bolts (Countersunk, Square Neck) Plow Bolts ASME B18.9](https://engineeringhardware.com/applications/plow-bolts/) - [Serrated T-Slot Bolts for Aluminum Profiles T-Slot Bolts GN 505.4](https://engineeringhardware.com/applications/gn-505-4-serrated-t-slot-bolt/) - [Sex Bolts & Barrel Nuts Sex Bolts & Barrel Nuts Trade series (barrel nut and mating screw)](https://engineeringhardware.com/applications/sex-bolts-barrel-nuts/) - [Shoulder Bolts Shoulder Bolts ISO 7379](https://engineeringhardware.com/applications/shoulder-bolts/) - [Single-End Studs Single-End Studs Trade series (single-end studs)](https://engineeringhardware.com/applications/single-end-studs/) - [Slotted Hex Bolt — GB/T 5782 / ISO 4014 (Series 005) Hex Bolts, Drawing Series GB/T 5782 / ISO 4014](https://engineeringhardware.com/applications/cad-svg-005-hexbolt/) - [Solar Module Mid Clamps and End Clamps Solar Module Clamps Trade series (solar module clamps)](https://engineeringhardware.com/applications/solar-module-mid-clamps-and-end-clamps/) - [Square Head Bolts with Collar Square-Head Bolts DIN 478](https://engineeringhardware.com/applications/din-478-square-head-bolt-with-collar/) - [Square-Head Bolts Square-Head Bolts ASME B18.2.1 / SAE J429 Grade 5](https://engineeringhardware.com/applications/square-head-bolts/) - [Structural Blind Bolts Structural Blind Bolts Trade series (structural blind bolts)](https://engineeringhardware.com/applications/structural-blind-bolts/) - [Stud / Threaded Rod — ISO / DIN (Series 154) Studs & Rods, Drawing Series ISO / DIN](https://engineeringhardware.com/applications/cad-svg-154-stud/) - [Stud Bolt, Double-End — GB/T 901 / DIN 939 (Series 091) Studs & Rods, Drawing Series GB/T 901 / DIN 939](https://engineeringhardware.com/applications/cad-svg-091-stud/) - [Studs & Threaded Rods Studs & Threaded Rods DIN 939 / DIN 975](https://engineeringhardware.com/applications/studs-threaded-rods/) - [T-Bolts and Tank-Strap Bolts T-Bolts and Tank-Strap Bolts Trade series (T-head bolts)](https://engineeringhardware.com/applications/t-bolts-and-tank-strap-bolts/) - [T-Slot Bolts (DIN 787) T-Slot Bolts DIN 787](https://engineeringhardware.com/applications/t-slot-bolts-din-787/) - [Tension-Control Structural Bolt Assemblies (TC / Twist-Off) Heavy Hex Structural Bolts ASTM F3125/F3125M Grade F1852 and F2280](https://engineeringhardware.com/applications/tension-control-structural-bolt-assemblies/) - [Threaded Rod — ISO / DIN (Series 153) Studs & Rods, Drawing Series ISO / DIN](https://engineeringhardware.com/applications/cad-svg-153-stud/) - [Trapezoidal (Metric ACME-Type) Threaded Rod Studs & Threaded Rods DIN 103](https://engineeringhardware.com/applications/din-103-trapezoidal-threaded-rod/) - [Triangular-Socket Security Bolts Triangular-Socket Security Bolts Trade series (three-sided socket security bolts)](https://engineeringhardware.com/applications/triangular-socket-security-bolts/) - [U-Bolts U-Bolts Industry standard](https://engineeringhardware.com/applications/u-bolts/) - [Weld Studs (CD and Drawn-Arc) Weld Studs ISO 13918](https://engineeringhardware.com/applications/weld-studs-iso-13918/) - [Wheel Lug Studs Wheel Lug Studs Trade series (serrated wheel studs)](https://engineeringhardware.com/applications/wheel-lug-studs/) ## Screws - [4IP Internal Service Screws for Mobile Devices Mobile Device Service Screws Trade series (4IP service screws)](https://engineeringhardware.com/applications/4ip-internal-service-screws-for-mobile-devices/) - [Ball-Ended Thrust Screws Ball-Ended Thrust Screws Trade series (ball-ended thrust screws)](https://engineeringhardware.com/applications/ball-ended-thrust-screws/) - [Bicycle General Threaded Fasteners Bicycle Service Screws Trade series (bicycle threaded fasteners)](https://engineeringhardware.com/applications/bicycle-general-threaded-fasteners/) - [Bicycle Spoke Nipples Bicycle Service Screws Trade series (spoke nipples)](https://engineeringhardware.com/applications/bicycle-spoke-nipples/) - [Button Head Socket Cap Screws, UNC Inch Socket Screws ASME B18.3](https://engineeringhardware.com/applications/asme-b18-3-3a-unc-button-head-socket-cap-screw/) - [Button Head Socket Screws Button Head Socket Screws ISO 7380](https://engineeringhardware.com/applications/button-head-socket-screws/) - [Captive Panel Screws, Spring-Loaded Captive Panel Screws Trade series (panel fastener)](https://engineeringhardware.com/applications/captive-panel-screws/) - [Cheese Head Screws Cheese Head Screws ISO 7048 / DIN 7985](https://engineeringhardware.com/applications/cheese-head-screws/) - [Concrete Screws, Hex Washer Head Concrete & Masonry Screws Trade series (hardened high-low thread)](https://engineeringhardware.com/applications/concrete-screws-hex-head/) - [Confirmat Furniture Screws Confirmat Furniture Screws Trade series (confirmat furniture screws)](https://engineeringhardware.com/applications/confirmat-furniture-screws/) - [Countersunk Socket Screws Countersunk Socket Screws ISO 10642 / DIN 7991](https://engineeringhardware.com/applications/countersunk-socket-screws/) - [Cross Flat-Head Knurled Self-Tapping Screws Knurled Self-Tapping Screws GB/T 845 / DIN 7981 / GB/T 5267.1](https://engineeringhardware.com/applications/cross-flat-head-knurled-self-tapping-screws/) - [Cross-Recess Internal Service Screws for Mobile Devices Mobile Device Service Screws Trade series (Phillips service screws)](https://engineeringhardware.com/applications/cross-recess-internal-service-screws-for-mobile-devices/) - [Decking Screws, Stainless Decking Screws Trade series (decking screw)](https://engineeringhardware.com/applications/decking-screws-stainless/) - [Dowel Screws (Wood-to-Metal) Dowel Screws Trade series (double-end wood screw)](https://engineeringhardware.com/applications/dowel-screws/) - [Drilled-Head Capstan Sealing Screws Sealing / Meter Screws GB/T 70.1 / DIN 912 / ISO 4762 and GB/T 70.3 / DIN 7991 / ISO 10642](https://engineeringhardware.com/applications/drilled-head-capstan-sealing-screws/) - [Drilled-Spanner Security Screws Security & Tamper-Resistant Screws Trade series (drilled-spanner security screws)](https://engineeringhardware.com/applications/drilled-spanner-security-screws/) - [Drywall Screws (Bugle Head) Drywall Screws DIN 18182-2](https://engineeringhardware.com/applications/drywall-screws/) - [Fillister Head Machine Screws, UNC (Slotted and Phillips) Machine Screws (Inch, UNC/UNF) ASME B18.6.3](https://engineeringhardware.com/applications/asme-b18-6-3-10ab-unc-fillister-head-machine-screws/) - [Fine Adjustment Set Screws Fine Adjustment Screws DIN 913](https://engineeringhardware.com/applications/fine-adjustment-set-screws/) - [Fine-Thread Socket Head Cap Screws Inch Socket Screws DIN 912 / ISO 4762 and ASME B18.3 (UNF)](https://engineeringhardware.com/applications/fine-thread-socket-head-cap-screws/) - [Five-Lobe Bottom Service Screws for Mobile Devices Mobile Device Service Screws Trade series (five-point service screws)](https://engineeringhardware.com/applications/five-lobe-bottom-service-screws-for-mobile-devices/) - [Flanged Button Head Socket Cap Screws, UNC Inch Socket Screws ASME B18.3](https://engineeringhardware.com/applications/asme-b18-3-3b-unc-flanged-button-head-socket-screw/) - [Flanged Button Head Socket Screws Flanged Button Head Screws Trade series (flanged button head)](https://engineeringhardware.com/applications/flanged-button-head-socket-screws/) - [Flat Head Machine Screws, UNC (Slotted and Phillips) Machine Screws (Inch, UNC/UNF) ASME B18.6.3](https://engineeringhardware.com/applications/asme-b18-6-3-1ab-unc-flat-head-machine-screws/) - [Flat Head Socket Cap Screws, UNC Inch Socket Screws ASME B18.3](https://engineeringhardware.com/applications/asme-b18-3-2-unc-flat-head-socket-cap-screw/) - [Flow-Drilling Screws Flow-Drilling Screws Trade series (flow-drilling screws)](https://engineeringhardware.com/applications/flow-drilling-screws/) - [Half-Round Head Wood Screws, GOST 1144 (Types 1–4) Wood Screws GOST 1144](https://engineeringhardware.com/applications/gost-1144-types-1-4-half-round-head-wood-screws/) - [Hex Socket Cone Point Set Screw — GB/T 77 / ISO 4026 (Series 022) Set Screws, Drawing Series GB/T 77 / ISO 4026](https://engineeringhardware.com/applications/cad-svg-022-setscrewcone/) - [Hex Socket Cone Point Set Screw — GB/T 78 / ISO 4027 (Series 027) Set Screws, Drawing Series GB/T 78 / ISO 4027](https://engineeringhardware.com/applications/cad-svg-027-setscrewcone/) - [Hex Socket Dog Point Set Screw — GB/T 79 / ISO 4029 (Series 018) Set Screws, Drawing Series GB/T 79 / ISO 4029](https://engineeringhardware.com/applications/cad-svg-018-setscrewdog/) - [Hex Socket Flat Point Set Screw — GB/T 77 / ISO 4026 (Series 019) Set Screws, Drawing Series GB/T 77 / ISO 4026](https://engineeringhardware.com/applications/cad-svg-019-setscrewflat/) - [Hex Washer Flange Self-Drilling Screws Self-Drilling Screws Trade series (hex washer flange self-drilling screws)](https://engineeringhardware.com/applications/hex-washer-flange-self-drilling-screws/) - [Hexalobular Socket Cheese Head Screws Torx (Hexalobular) Screws ISO 14580](https://engineeringhardware.com/applications/iso-14580-hexalobular-socket-cheese-head-screw/) - [Hexalobular Socket Countersunk Head Screws, High Head Torx (Hexalobular) Screws ISO 14582](https://engineeringhardware.com/applications/iso-14582-high-head-torx-countersunk-screw/) - [Hexalobular Socket Head Cap Screws Torx (Hexalobular) Screws ISO 14579](https://engineeringhardware.com/applications/iso-14579-hexalobular-socket-head-cap-screw/) - [Hexalobular Socket Oval Countersunk Head Screws Torx (Hexalobular) Screws ISO 14584](https://engineeringhardware.com/applications/iso-14584-hexalobular-socket-oval-countersunk-head-screw/) - [Hexalobular Socket Pan Head Screws Torx (Hexalobular) Screws ISO 14583](https://engineeringhardware.com/applications/iso-14583-torx-pan-head-screw/) - [High-Strength Socket Head Cap Screws (Inch) Socket Head Cap Screws ASTM A574](https://engineeringhardware.com/applications/high-strength-socket-cap-screws-inch/) - [Jack Screws for D-Sub Connectors Jack Screws & Connector Hardware Trade series (DIN 41652 / D-sub hardware)](https://engineeringhardware.com/applications/jack-screws-d-sub/) - [JIS Cross-Recess Micro Screws Micro & Miniature Screws Trade series (JIS cross-recess micro screws)](https://engineeringhardware.com/applications/jis-cross-recess-micro-screws/) - [Knurled Thumb Screws, High Type Thumb & Knurled Screws DIN 464](https://engineeringhardware.com/applications/knurled-thumb-screws-din-464/) - [Knurled Thumb Screws, Low Type Thumb & Knurled Screws DIN 653](https://engineeringhardware.com/applications/din-653-knurled-thumb-screw-low-type/) - [Low Head Socket Cap Screws Low Head Socket Screws DIN 7984](https://engineeringhardware.com/applications/din-7984-low-head-socket-cap-screw/) - [Low Head Socket Cap Screws (DIN 6912) Low Head Socket Screws DIN 6912](https://engineeringhardware.com/applications/low-head-socket-cap-screws/) - [Low Head Socket Cap Screws, UNC Inch Socket Screws ASME B18.3](https://engineeringhardware.com/applications/asme-b18-3-1g-unc-low-head-socket-cap-screw/) - [M.2 SSD Mounting Screws M.2 SSD Mounting Screws Trade series (M.2 mounting screws)](https://engineeringhardware.com/applications/m2-ssd-mounting-screws/) - [Machine Screws, Inch (UNC & UNF) Machine Screws (Inch, UNC/UNF) ASME B18.6.3](https://engineeringhardware.com/applications/machine-screws-inch-unc-unf/) - [Masonry Screws, Countersunk Torx Concrete & Masonry Screws Trade series (hardened high-low thread)](https://engineeringhardware.com/applications/masonry-screws-countersunk/) - [Micro Miniature Small Pan-Head Phillips Machine Screws Micro & Miniature Screws Trade series (micro machine screws)](https://engineeringhardware.com/applications/micro-miniature-small-pan-head-phillips-machine-screws/) - [Micro Small Countersunk Phillips Machine Screws Micro Countersunk Screws Trade series (micro machine screws)](https://engineeringhardware.com/applications/micro-small-countersunk-phillips-machine-screws/) - [Micro Thin-Head Phillips Machine Screws Micro & Miniature Screws Trade series (micro machine screws)](https://engineeringhardware.com/applications/micro-thin-head-phillips-machine-screws/) - [Miniature Captive Pan-Head Screws Captive Pan-Head Screws Trade series (miniature captive screws)](https://engineeringhardware.com/applications/miniature-captive-pan-head-screws/) - [Mirror Screws with Dome Caps Mirror Screws & Dome Caps Trade series (mirror screw and cap)](https://engineeringhardware.com/applications/mirror-screws-dome-caps/) - [One-Way Security Screws Security & Tamper-Resistant Screws Trade series (one-way clutch head)](https://engineeringhardware.com/applications/one-way-security-screws/) - [Oval-Head Machine Screws Oval-Head Machine Screws ASME B18.6.3](https://engineeringhardware.com/applications/oval-head-machine-screws/) - [Oval-Head Sheet-Metal Screws Oval-Head Sheet-Metal Screws Trade series (oval sheet-metal screws)](https://engineeringhardware.com/applications/oval-head-sheet-metal-screws/) - [Pan Head Screws Pan Head Screws ISO 7045 / DIN 7985](https://engineeringhardware.com/applications/pan-head-screws/) - [Pan Head Self-Drilling Screws (DIN 7504 N) Self-Drilling Screws DIN 7504 N / ASTM C1513](https://engineeringhardware.com/applications/pan-head-self-drilling-screws-din-7504-n/) - [PEEK Engineering Plastic Micro Countersunk Screws Plastic Micro Screws Trade series (PEEK micro screws)](https://engineeringhardware.com/applications/peek-engineering-plastic-micro-countersunk-screws/) - [Pentagon-Head Security Screws Security & Tamper-Resistant Screws Trade series (pentagon-head security screws)](https://engineeringhardware.com/applications/pentagon-head-security-screws/) - [Phillips Countersunk Machine Screw — GB/T 819.1 / ISO 7046 (Series 029) Countersunk Screws, Drawing Series GB/T 819.1 / ISO 7046](https://engineeringhardware.com/applications/cad-svg-029-countersunk/) - [Phillips Countersunk Screws Phillips Countersunk Screws ISO 7046 / DIN 965](https://engineeringhardware.com/applications/phillips-countersunk-screws/) - [Phillips Oval Countersunk Head Machine Screws, Metric Oval-Head Machine Screws ISO 7047](https://engineeringhardware.com/applications/iso-7047-phillips-oval-countersunk-head-machine-screw/) - [Phillips Pan Head Machine Screw — GB/T 818 / ISO 7045 (Series 033) Pan Head Screws, Drawing Series GB/T 818 / ISO 7045](https://engineeringhardware.com/applications/cad-svg-033-panhead/) - [Phillips Pan Head Machine Screws with Collar Pan Head Screws DIN 967](https://engineeringhardware.com/applications/din-967-phillips-pan-head-machine-screw-with-collar/) - [Phillips Pan Head Wood Screws, Metric Wood Screws DIN 7996](https://engineeringhardware.com/applications/din-7996-phillips-pan-head-wood-screw/) - [Pin-in-Hex Tamper-Resistant Socket Screws Security & Tamper-Resistant Screws ISO 4762](https://engineeringhardware.com/applications/pin-in-hex-security-screws/) - [Pin-in-Torx Security Screws Security & Tamper-Resistant Screws ISO 14583](https://engineeringhardware.com/applications/pin-in-torx-security-screws/) - [Pocket-Hole Screws Pocket-Hole Screws Trade series (pocket-hole screws)](https://engineeringhardware.com/applications/pocket-hole-screws/) - [Roofing Screws with Bonded EPDM Washer Roofing & Cladding Screws Trade series (cladding fastener)](https://engineeringhardware.com/applications/roofing-screws-epdm-washer/) - [Round Head Machine Screws, UNC (Slotted and Phillips) Machine Screws (Inch, UNC/UNF) ASME B18.6.3](https://engineeringhardware.com/applications/asme-b18-6-3-16ab-unc-round-head-machine-screws/) - [Screw Eyes & Screw Hooks Screw Eyes & Screw Hooks Trade series (screw eye / cup hook)](https://engineeringhardware.com/applications/screw-eyes-and-hooks/) - [Sealing Screws with Bonded Washer Sealing Screws DIN 933](https://engineeringhardware.com/applications/sealing-screws-bonded-washer/) - [Self-Drilling Screws Self-Drilling Screws DIN 7504](https://engineeringhardware.com/applications/self-drilling-screws/) - [Self-Tapping Screws Self-Tapping Screws ISO 7049 / DIN 7981](https://engineeringhardware.com/applications/self-tapping-screws/) - [Self-Tapping Screws, WN 14xx Series Thread-Forming Screws WN 1411 / WN 1412 / WN 1413 / WN 1423 / WN 1446 / WN 1447 / WN 1451 / WN 1452 / WN 1453](https://engineeringhardware.com/applications/wn-14xx-self-tapping-screw-series/) - [SEMS Screws with Captive Conical Spring Washers Pan Head Screws DIN 6900-5 Z9 and DIN 6908](https://engineeringhardware.com/applications/sems-screws-with-captive-conical-spring-washers/) - [SEMS Screws with Captive Flat Washers Pan Head Screws DIN 7985 / ISO 7045 and EN ISO 10644](https://engineeringhardware.com/applications/sems-screws-with-captive-flat-washers/) - [SEMS Screws with Captive Spring Washer SEMS Screws (Captive Washer) DIN 6900-4](https://engineeringhardware.com/applications/sems-screws-din-6900/) - [Server Rack Screws and Cage-Nut Hardware Server Rack Screws Trade series (rack screws and cage-nut hardware)](https://engineeringhardware.com/applications/server-rack-screws-and-cage-nut-hardware/) - [Sheet-Metal Self-Tapping Screw — GB/T 845 / ISO 7049 (Series 045) Self-Tapping Screws, Drawing Series GB/T 845 / ISO 7049](https://engineeringhardware.com/applications/cad-svg-045-tapping/) - [Slotted Adjusting Screws (DIN 551) Fine Adjustment Screws DIN 551](https://engineeringhardware.com/applications/slotted-adjusting-screws-din-551/) - [Slotted Headless Screws with Shank Set Screws ISO 2342](https://engineeringhardware.com/applications/iso-2342-slotted-headless-screw-with-shank/) - [Slotted Knurled Thumb Screws, High Type Thumb & Knurled Screws DIN 465](https://engineeringhardware.com/applications/din-465-slotted-knurled-thumb-screw-high-type/) - [Slotted Oval Countersunk Head Machine Screws Oval-Head Machine Screws ISO 2010](https://engineeringhardware.com/applications/iso-2010-slotted-oval-countersunk-head-machine-screw/) - [Slotted Oval Head Machine Screws, UNC Machine Screws (Inch, UNC/UNF) ASME B18.6.3](https://engineeringhardware.com/applications/asme-b18-6-3-4a-unc-slotted-oval-head-machine-screw/) - [Slotted Pan Head Machine Screws, UNC Machine Screws (Inch, UNC/UNF) ASME B18.6.3](https://engineeringhardware.com/applications/asme-b18-6-3-9a-unc-slotted-pan-head-machine-screw/) - [Slotted Set Screws with Cone Point Set Screws ISO 7434](https://engineeringhardware.com/applications/iso-7434-slotted-set-screw-cone-point/) - [Slotted Set Screws with Cup Point Set Screws ISO 7436](https://engineeringhardware.com/applications/iso-7436-slotted-set-screw-cup-point/) - [Slotted Terminal Screws Terminal Screws DIN 84](https://engineeringhardware.com/applications/slotted-terminal-screws/) - [Slotted Truss Head Machine Screws, UNC Machine Screws (Inch, UNC/UNF) ASME B18.6.3](https://engineeringhardware.com/applications/asme-b18-6-3-12a-unc-slotted-truss-head-machine-screw/) - [Socket Head Cap Screw — GB/T 70.1 / ISO 4762 (Series 014) Socket Cap Screws, Drawing Series GB/T 70.1 / ISO 4762](https://engineeringhardware.com/applications/cad-svg-014-sockethead/) - [Socket Head Cap Screws Socket Head Cap Screws ISO 4762 / DIN 912](https://engineeringhardware.com/applications/socket-head-cap-screws/) - [Socket Head Shoulder Screw — GB/T 5281 / ISO 7379 (Series 017) Shoulder Screws, Drawing Series GB/T 5281 / ISO 7379](https://engineeringhardware.com/applications/cad-svg-017-shoulderbolt/) - [Socket Set Screws Set Screws ISO 4026 / ISO 4029 / DIN 913-916](https://engineeringhardware.com/applications/socket-set-screws/) - [Socket Set Screws, UNC (Flat, Cone, Dog and Cup Point) Inch Socket Screws ASME B18.3](https://engineeringhardware.com/applications/asme-b18-3-5abcd-unc-socket-set-screw-points/) - [Soft-Tip Set Screws (Nylon and Brass) Soft-Tip Set Screws Trade series (soft-tip set screw)](https://engineeringhardware.com/applications/soft-tip-set-screws/) - [Standoff Service Screws for Mobile Devices Mobile Device Service Screws Trade series (miniature standoff service screws)](https://engineeringhardware.com/applications/standoff-service-screws-for-mobile-devices/) - [Thread Cutting Screws (Type F) Thread-Cutting & Self-Cutting Screws DIN 7516](https://engineeringhardware.com/applications/thread-cutting-screws-din-7516/) - [Thread Forming Screws for Plastic Thread-Forming Screws Industry standard](https://engineeringhardware.com/applications/thread-forming-screws-plastic/) - [Thumb Screws, Flat Spade Head Thumb & Knurled Screws Trade series (spade-head hand screw)](https://engineeringhardware.com/applications/thumb-screws-spade-head/) - [Torx Countersunk Machine Screws Torx (Hexalobular) Screws ISO 14581](https://engineeringhardware.com/applications/torx-countersunk-machine-screws/) - [Torx Countersunk Self-Cutting Screws Thread-Cutting & Self-Cutting Screws Trade series (T30 countersunk self-cutting screws)](https://engineeringhardware.com/applications/torx-countersunk-self-cutting-screws/) - [Tri-Point Internal Service Screws for Mobile Devices Mobile Device Service Screws Trade series (three-point service screws)](https://engineeringhardware.com/applications/tri-point-internal-service-screws-for-mobile-devices/) - [Tri-Wing Pan-Head Machine Screws Security & Tamper-Resistant Screws Trade series (Tri-Wing pan-head screws)](https://engineeringhardware.com/applications/tri-wing-pan-head-machine-screws/) - [Trilobular Metal Thread-Forming Screws Thread-Forming Screws Trade series (trilobular thread-forming screws)](https://engineeringhardware.com/applications/trilobular-metal-thread-forming-screws/) - [Truss Head Machine Screws Truss Head Screws ASME B18.6.3](https://engineeringhardware.com/applications/truss-head-machine-screws/) - [Vented Vacuum Screws Vented & Vacuum Screws ISO 4762](https://engineeringhardware.com/applications/vented-vacuum-screws/) - [Wing Screws (DIN 316 Form) Wing Screws DIN 316](https://engineeringhardware.com/applications/wing-screws-din-316/) - [Wood Construction Screws (Partially Threaded) Wood Construction Screws EN 14592](https://engineeringhardware.com/applications/wood-construction-screws/) - [Wood Screws Wood Screws DIN 96 / DIN 97 / DIN 7997](https://engineeringhardware.com/applications/wood-screws/) - [Wood Screws, Inch (Flat and Oval Head, Slotted and Phillips) Wood Screws ASME B18.6.1](https://engineeringhardware.com/applications/asme-b18-6-1-inch-wood-screw-family/) ## Nuts - [Adhesive-Mount Nuts Adhesive-Mount Nuts Trade series (adhesive-backed mounting nuts)](https://engineeringhardware.com/applications/adhesive-mount-nuts/) - [Aerospace Corner Self-Locking Nutplates Floating & Anchor Nuts MS21055 and NASM25027](https://engineeringhardware.com/applications/aerospace-corner-self-locking-nutplates/) - [Aerospace Two-Lug Floating Self-Locking Nutplates Floating & Anchor Nuts MS21059 and NASM25027](https://engineeringhardware.com/applications/aerospace-two-lug-floating-self-locking-nutplates/) - [All-Metal Hex Flange Lock Nuts Flange Lock Nuts (Nylon & All-Metal) GB/T 6187 / DIN 6927 / ASME B18.2.2](https://engineeringhardware.com/applications/all-metal-hex-flange-lock-nuts/) - [All-Metal Lock Nuts All-Metal Lock Nuts ISO 7042 / DIN 980](https://engineeringhardware.com/applications/all-metal-lock-nuts/) - [Bearing Lock Nuts (KM Series) Bearing Lock Nuts (KM) DIN 981](https://engineeringhardware.com/applications/bearing-lock-nuts-km/) - [Cage Nuts (Snap-In Rack Nuts) Cage Nuts & Clip-On Nuts Trade series (EIA-310 rack practice)](https://engineeringhardware.com/applications/cage-nuts/) - [Cap (Acorn) Nuts Cap (Acorn) Nuts DIN 1587](https://engineeringhardware.com/applications/cap-acorn-nuts/) - [Cap Nuts, GOST 11860 Type 1 Cap (Acorn) Nuts GOST 11860](https://engineeringhardware.com/applications/gost-11860-type-1-cap-nut/) - [Castellated Hex Nut — GB/T 6180 / ISO 7036 (Series 048) Castellated Nuts, Drawing Series GB/T 6180 / ISO 7036](https://engineeringhardware.com/applications/cad-svg-048-castellatednut/) - [Castle Nuts (DIN 935) Castle & Slotted Nuts DIN 935](https://engineeringhardware.com/applications/castle-nuts-din-935/) - [Channel (Strut) Nuts with Spring Channel (Strut) Nuts Trade series (strut channel nut)](https://engineeringhardware.com/applications/channel-strut-nuts/) - [Clinch Lantern Rivet Nuts Rivet Nuts (Blind Threaded Inserts) Trade series (lantern-type clinch rivet nuts)](https://engineeringhardware.com/applications/clinch-lantern-rivet-nuts/) - [Clip-On Nuts (Sheet Metal Speed Nuts) Cage Nuts & Clip-On Nuts Trade series (U-clip speed nut)](https://engineeringhardware.com/applications/clip-on-nuts/) - [Closed-End Round-Body Blind Rivet Nuts Rivet Nuts (Blind Threaded Inserts) Trade series (closed-end blind rivet nuts)](https://engineeringhardware.com/applications/closed-end-round-body-blind-rivet-nuts/) - [Concealed-Head Self-Clinching Studs and Standoffs Concealed Head Self Clinching Trade series (concealed-head clinch hardware)](https://engineeringhardware.com/applications/concealed-head-self-clinching-studs-and-standoffs/) - [Cross Dowel Furniture Nuts Cross Dowel Nuts Trade series (cross dowel nuts)](https://engineeringhardware.com/applications/cross-dowel-furniture-nuts/) - [Custom Slotted Round Nut — GB/T 812 (Series 070) Slotted Round Nuts GB/T 812](https://engineeringhardware.com/applications/cad-svg-070-roundnut/) - [Elastomer-Sealing Nuts Elastomer-Sealing Nuts Trade series (elastomer-sealing nuts)](https://engineeringhardware.com/applications/elastomer-sealing-nuts/) - [Enclosure Grounding Lug Kits Enclosure Grounding Lug Kits Trade series (enclosure grounding lug kits)](https://engineeringhardware.com/applications/enclosure-grounding-lug-kits/) - [EPDM Rubber Well Nuts EPDM Rubber Well Nuts Trade series (rubber blind nuts)](https://engineeringhardware.com/applications/epdm-rubber-well-nuts/) - [Fine-Thread All-Metal Hex Flange Lock Nuts Flange Lock Nuts (Nylon & All-Metal) ISO 12126](https://engineeringhardware.com/applications/iso-12126-fine-thread-all-metal-hex-flange-lock-nut/) - [Fine-Thread All-Metal Hex Lock Nuts All-Metal Lock Nuts ISO 10513](https://engineeringhardware.com/applications/iso-10513-fine-thread-all-metal-hex-lock-nut/) - [Fine-Thread Hex Flange Nuts Hex Flange Nuts ISO 10663](https://engineeringhardware.com/applications/iso-10663-fine-thread-hex-flange-nut/) - [Fine-Thread Hex Nuts, Style 2 Hex Nuts ISO 8674](https://engineeringhardware.com/applications/iso-8674-fine-thread-hex-nut-style-2/) - [Fine-Thread Nylon Insert Hex Flange Lock Nuts Flange Lock Nuts (Nylon & All-Metal) ISO 12125](https://engineeringhardware.com/applications/iso-12125-fine-thread-nylon-insert-hex-flange-lock-nut/) - [Fine-Thread Nylon Insert Hex Lock Nuts Nyloc Lock Nuts ISO 10512](https://engineeringhardware.com/applications/iso-10512-fine-thread-nylon-insert-hex-lock-nut/) - [Floating Anchor Nuts (Riveted Basket) Floating & Anchor Nuts Trade series (anchor nut, MS21047 practice)](https://engineeringhardware.com/applications/floating-anchor-nuts/) - [Full-Hex Open-End Blind Rivet Nuts Rivet Nuts (Blind Threaded Inserts) Trade series (full-hex open-end blind rivet nuts)](https://engineeringhardware.com/applications/full-hex-open-end-blind-rivet-nuts/) - [Grade 5 UNF Fine-Thread Hex Nuts Inch Hex Nuts ASME B18.2.2 / ASTM A563 / ASME B1.1](https://engineeringhardware.com/applications/grade-5-unf-fine-thread-hex-nuts/) - [Hex Coupling Nuts, UNC Coupling Nuts ASME B18.2.2](https://engineeringhardware.com/applications/asme-b18-2-2-13-unc-hex-coupling-nut/) - [Hex Flange Nuts Hex Flange Nuts ISO 4161 / DIN 6923](https://engineeringhardware.com/applications/hex-flange-nuts/) - [Hex Flange Nuts, UNC Hex Flange Nuts ASME B18.2.2](https://engineeringhardware.com/applications/asme-b18-2-2-12-unc-hex-flange-nut/) - [Hex Nut — GB/T 6170 / ISO 4032 (Series 059) Hex Nuts, Drawing Series GB/T 6170 / ISO 4032](https://engineeringhardware.com/applications/cad-svg-059-hexnut/) - [Hex Nuts Hex Nuts ISO 4032 / ISO 4033](https://engineeringhardware.com/applications/hex-nuts/) - [Hex Nuts with Collar, 1.5d Height Thick & High Nuts DIN 6331](https://engineeringhardware.com/applications/din-6331-hex-nut-with-collar-1-5d/) - [Hex Nuts, Grade C Hex Nuts ISO 4034](https://engineeringhardware.com/applications/hex-nuts-grade-c/) - [Hex Slotted Castle Nut (Type 1) — GB/T 6180 / ISO 7036 (Series 049) Castellated Nuts, Drawing Series GB/T 6180 / ISO 7036](https://engineeringhardware.com/applications/cad-svg-049-castellatednut/) - [Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050) Castellated Nuts, Drawing Series GB/T 6180 / ISO 7036](https://engineeringhardware.com/applications/cad-svg-050-castellatednut/) - [Hex Thick Nuts (DIN 6330) Thick & High Nuts DIN 6330](https://engineeringhardware.com/applications/hex-thick-nuts-din-6330/) - [Hex Weld Nuts with Flange Weld Nuts ISO 21670](https://engineeringhardware.com/applications/iso-21670-hex-weld-nut-with-flange/) - [Hexagon Coupling Nuts Coupling Nuts DIN 6334](https://engineeringhardware.com/applications/hexagon-coupling-nuts-din-6334/) - [Hexagon Weld Nuts Weld Nuts DIN 929](https://engineeringhardware.com/applications/hexagon-weld-nuts-din-929/) - [Imperial Hex Nuts (UNC / UNF) Inch Hex Nuts ANSI/ASME B18.2.2 / BS 1768](https://engineeringhardware.com/applications/imperial-hex-nuts-unc-unf/) - [Jam Nuts (Thin Hex, Inch) Thin Hex & Jam Nuts ASME B18.2.2](https://engineeringhardware.com/applications/jam-nuts-inch/) - [Knurled Nuts, High Type Knurled & Thumb Nuts DIN 466](https://engineeringhardware.com/applications/knurled-nuts-din-466/) - [Left-Hand Thread Hex Nuts Left-Hand Thread Nuts DIN 934](https://engineeringhardware.com/applications/left-hand-thread-hex-nuts/) - [Lifting Eye Nuts Lifting Eye Nuts DIN 582](https://engineeringhardware.com/applications/lifting-eye-nuts/) - [Low and High Cap (Acorn) Nuts, Inch Cap (Acorn) Nuts SAE J483](https://engineeringhardware.com/applications/sae-j483a-low-high-cap-nuts/) - [Low Cap (Acorn) Nuts Cap (Acorn) Nuts DIN 917](https://engineeringhardware.com/applications/din-917-low-cap-acorn-nut/) - [Machine Screw Nuts, UNC (Hex and Square) Inch Hex Nuts ASME B18.2.2](https://engineeringhardware.com/applications/asme-b18-2-2-1ab-unc-machine-screw-nuts/) - [Nyloc Lock Nuts Nyloc Lock Nuts DIN 985 / ISO 7040](https://engineeringhardware.com/applications/nyloc-lock-nuts/) - [Nylon Insert Flange Nuts (DIN 6926) Flange Lock Nuts (Nylon & All-Metal) DIN 6926](https://engineeringhardware.com/applications/nylon-insert-flange-nuts-din-6926/) - [Nylon Insert Hex Lock Nut — GB/T 889 / ISO 7040 (Series 078) Lock Nuts, Drawing Series GB/T 889 / ISO 7040](https://engineeringhardware.com/applications/cad-svg-078-nylocnut/) - [Panel Nuts (Thin, Fine Pitch) Panel Nuts DIN 439](https://engineeringhardware.com/applications/panel-nuts-fine-pitch/) - [Push-Button Quick-Adjust Nuts Quick-Adjust Nuts Trade series (quick-adjust half nut)](https://engineeringhardware.com/applications/push-button-quick-adjust-nuts/) - [Push-On Nuts (Starlock Retainers) Push-On Nuts & Retainers Trade series (push-on retaining washer)](https://engineeringhardware.com/applications/push-on-nuts/) - [Rivet Nuts (Blind Threaded Inserts) Rivet Nuts (Blind Threaded Inserts) Trade series (blind rivet nut)](https://engineeringhardware.com/applications/rivet-nuts-blind-inserts/) - [Screw-Mount Nuts Screw-Mount Nuts Trade series (screw-mount nuts)](https://engineeringhardware.com/applications/screw-mount-nuts/) - [Sealing Cap Nuts Sealing Nuts DIN 1587](https://engineeringhardware.com/applications/sealing-cap-nuts/) - [Self-Clinching Press-Fit Nuts Self-Clinching & Press-Fit Hardware Trade series (self-clinching, IFI-111 practice)](https://engineeringhardware.com/applications/self-clinching-press-fit-nuts/) - [Self-Clinching Standoffs for Sheet Metal Self-Clinching & Press-Fit Hardware Trade series (self-clinching sheet-metal standoffs)](https://engineeringhardware.com/applications/self-clinching-standoffs-for-sheet-metal/) - [Self-Clinching Threaded Studs and Pins Self-Clinching & Press-Fit Hardware Trade series (self-clinching studs and pins)](https://engineeringhardware.com/applications/self-clinching-threaded-studs-and-pins/) - [Self-Locking Counter Nuts All-Metal Lock Nuts DIN 7967](https://engineeringhardware.com/applications/din-7967-self-locking-counter-nut/) - [Serrated Flange Lock Nuts Flange Lock Nuts (Nylon & All-Metal) DIN 6923](https://engineeringhardware.com/applications/serrated-flange-lock-nuts-din-6923/) - [Shear Nuts (Breakaway Security Nuts) Tamper-Resistant Nuts Trade series (breakaway cone nut)](https://engineeringhardware.com/applications/shear-security-nuts/) - [Sliding Spring T-Nuts for Aluminium Profile Aluminum-Profile T-Nuts Trade series (profile drop-in T-nuts)](https://engineeringhardware.com/applications/sliding-spring-t-nuts-aluminium-profile/) - [Slotted Hex Nuts, UNC Castle & Slotted Nuts ASME B18.2.2](https://engineeringhardware.com/applications/asme-b18-2-2-5-unc-slotted-hex-nut/) - [Slotted Round Nut — GB/T 812 (Series 069) Slotted Round Nuts GB/T 812](https://engineeringhardware.com/applications/cad-svg-069-roundnut/) - [Slotted Round Nut, Small Series — GB/T 812 (Series 068) Slotted Round Nuts GB/T 812](https://engineeringhardware.com/applications/cad-svg-068-roundnut/) - [Snap-In Nuts Snap-In Nuts Trade series (snap-in panel nuts)](https://engineeringhardware.com/applications/snap-in-nuts/) - [Socket Nuts (Hex Drive, Round Body) Socket & Split Nuts Trade series (round body socket nut)](https://engineeringhardware.com/applications/socket-nuts-hex-drive/) - [Solderable SMT Nuts Solderable SMT Nuts Trade series (solderable SMT nuts)](https://engineeringhardware.com/applications/solderable-smt-nuts/) - [Split Nuts (Axially Slotted) Socket & Split Nuts Trade series (split hex nut)](https://engineeringhardware.com/applications/split-nuts/) - [Square Nuts Square Nuts DIN 557](https://engineeringhardware.com/applications/square-nuts/) - [Square Nuts, UNC Square Nuts ASME B18.2.2](https://engineeringhardware.com/applications/asme-b18-2-2-2-unc-square-nut/) - [Square Weld Nuts Weld Nuts DIN 928](https://engineeringhardware.com/applications/din-928-square-weld-nut/) - [Stainless Knurled Countersunk Blind Rivet Nuts Rivet Nuts (Blind Threaded Inserts) Trade series (Bollhoff RIVKLE stainless-steel series)](https://engineeringhardware.com/applications/stainless-knurled-countersunk-blind-rivet-nuts/) - [Stainless Steel Square Nuts Square Nuts Trade series (stainless square nuts)](https://engineeringhardware.com/applications/stainless-steel-square-nuts/) - [Stover All-Metal Lock Nuts (Inch) All-Metal Lock Nuts IFI-100/107](https://engineeringhardware.com/applications/stover-lock-nuts-inch/) - [T-Slot Nuts T-Slot Nuts DIN 508](https://engineeringhardware.com/applications/t-slot-nuts/) - [T-Slot Nuts (DIN 508) T-Slot Nuts DIN 508](https://engineeringhardware.com/applications/t-slot-nuts-din-508/) - [T-Slot Nuts for Aluminum Profiles (Quarter-Turn, Swivel-In, Sliding) Aluminum-Profile T-Nuts GN 505 / GN 506 / GN 507](https://engineeringhardware.com/applications/gn-505-506-507-t-slot-nuts/) - [Tee Nuts (Pronged Insert Nuts) Tee Nuts Trade series (pronged T-nut)](https://engineeringhardware.com/applications/tee-nuts/) - [Thin Castle Nuts (DIN 937) Castle & Slotted Nuts DIN 937](https://engineeringhardware.com/applications/thin-castle-nuts-din-937/) - [Thin Hex Nut — GB/T 6172.1 / ISO 4035 (Series 055) Hex Nuts, Drawing Series GB/T 6172.1 / ISO 4035](https://engineeringhardware.com/applications/cad-svg-055-hexnut/) - [Thin Hex Nuts Thin Hex & Jam Nuts ISO 4035](https://engineeringhardware.com/applications/thin-hex-nuts/) - [Thin Hex Nuts, Unchamfered Thin Hex & Jam Nuts ISO 4036](https://engineeringhardware.com/applications/iso-4036-thin-hex-nut-unchamfered/) - [Thin Nylon Insert Lock Nuts (DIN 985) Nyloc Lock Nuts DIN 985](https://engineeringhardware.com/applications/thin-nyloc-nuts-din-985/) - [Thumb Nuts (Type A) Knurled & Thumb Nuts Industry standard](https://engineeringhardware.com/applications/thumb-nuts-type-a/) - [Wheel Lug Nuts Wheel & Lug Nuts Trade series (acorn wheel lug nuts)](https://engineeringhardware.com/applications/wheel-lug-nuts/) - [Wheel Nuts, Conical and Ball Seat Wheel & Lug Nuts Trade series (wheel nut)](https://engineeringhardware.com/applications/wheel-nuts-conical-seat/) - [Wing Nut — GB/T 62 / DIN 315 (Series 077) Wing Nuts, Drawing Series GB/T 62 / DIN 315](https://engineeringhardware.com/applications/cad-svg-077-wingnut/) - [Wing Nuts Wing Nuts DIN 315](https://engineeringhardware.com/applications/wing-nuts/) - [Wing Nuts, Type A, Inch Wing Nuts ASME B18.6.9](https://engineeringhardware.com/applications/asme-b18-6-9a-inch-wing-nut-type-a/) ## Washers - [Aluminum Flat Sealing Washers Sealing & Bonded Washers DIN 7603 Type A](https://engineeringhardware.com/applications/aluminum-flat-sealing-washers-din-7603/) - [Bearing Lock Washers (MB Series) Bearing Lock Washers DIN 5406](https://engineeringhardware.com/applications/bearing-lock-washers-din-5406/) - [Belleville Washers (Inch Series) Disc Springs & Belleville Washers Trade series (inch Belleville)](https://engineeringhardware.com/applications/belleville-washers-inch/) - [Bonded Sealing Washers Sealing & Bonded Washers Trade series (bonded seal washer, Dowty pattern)](https://engineeringhardware.com/applications/bonded-sealing-washers/) - [Conical Seat Washers, Type G Spherical Washers & Conical Seats DIN 6319 G](https://engineeringhardware.com/applications/din-6319g-conical-seat-washer/) - [Conical Spring Washers (HV) Conical Spring Washers DIN 6796](https://engineeringhardware.com/applications/conical-spring-washers-din-6796/) - [Copper Sealing Washers (DIN 7603 A) Copper & Aluminium Sealing Washers DIN 7603](https://engineeringhardware.com/applications/copper-sealing-washers-din-7603/) - [Countersunk Washers (90° Seat) Countersunk & Finishing Washers Trade series (90° countersunk washer)](https://engineeringhardware.com/applications/countersunk-washers/) - [Cross-Bracing and Hillside Washers Cross-Bracing and Hillside Washers Trade series (cross-bracing washers)](https://engineeringhardware.com/applications/cross-bracing-and-hillside-washers/) - [Cup Finishing Washers Countersunk & Finishing Washers Trade series (cup finishing washer)](https://engineeringhardware.com/applications/cup-finishing-washers/) - [Cup Washers Cup Washers Industry standard](https://engineeringhardware.com/applications/cup-washers/) - [Disc Springs (Belleville Washers) Disc Springs & Belleville Washers DIN 2093](https://engineeringhardware.com/applications/disc-springs-din-2093/) - [EPDM Sealing Washers Sealing & Bonded Washers Industry standard](https://engineeringhardware.com/applications/epdm-sealing-washers/) - [External Tooth Lock Washers Tooth Lock Washers DIN 6798 A](https://engineeringhardware.com/applications/external-tooth-lock-washers-din-6798a/) - [Extra-Thick Flat Washers Extra-Thick Flat Washers Trade series (heavy-duty thick plain washers)](https://engineeringhardware.com/applications/extra-thick-flat-washers/) - [Fender Washers Fender Washers DIN 9021](https://engineeringhardware.com/applications/fender-washers/) - [Flat Plain Washer (GB/T 95) — GB/T 97.1 / ISO 7089 (Series 086) Flat Washers, Drawing Series GB/T 97.1 / ISO 7089](https://engineeringhardware.com/applications/cad-svg-086-washer/) - [Flat Washers Flat Washers ISO 7089 / ISO 7093](https://engineeringhardware.com/applications/flat-washers/) - [Flat Washers for Clevis Pins Flat Washers ISO 8738](https://engineeringhardware.com/applications/iso-8738-flat-washer-for-clevis-pins/) - [Flat Washers, Extra Large Series Fender Washers ISO 7094](https://engineeringhardware.com/applications/iso-7094-extra-large-flat-washer/) - [Flat Washers, Small Series Flat Washers ISO 7092](https://engineeringhardware.com/applications/iso-7092-flat-washer-small-series/) - [General Flat Washer — GB/T 97.1 / ISO 7089 (Series 087) Flat Washers, Drawing Series GB/T 97.1 / ISO 7089](https://engineeringhardware.com/applications/cad-svg-087-washer/) - [Heavy-Duty Washers for Clamping Fixtures Extra-Thick Flat Washers DIN 6340](https://engineeringhardware.com/applications/din-6340-heavy-duty-clamping-washer/) - [Insulating Fibre Washers Non-Metallic Washers Trade series (vulcanised fibre washer)](https://engineeringhardware.com/applications/insulating-fibre-washers/) - [Insulating Shoulder Washers Non-Metallic Washers Industry standard](https://engineeringhardware.com/applications/insulating-shoulder-washers/) - [Internal Tooth Lock Washers Tooth Lock Washers DIN 6798 J](https://engineeringhardware.com/applications/internal-tooth-lock-washers-din-6798j/) - [Leveling Washers, Spherical Pairs (Inch) Spherical Washers & Conical Seats Trade series (spherical washer pair, inch)](https://engineeringhardware.com/applications/leveling-washers-spherical-inch/) - [Micro Spring Lock Washers Micro Spring Lock Washers Trade series (miniature spring washers)](https://engineeringhardware.com/applications/micro-spring-lock-washers/) - [Neoprene Washers Non-Metallic Washers DIN 125 A](https://engineeringhardware.com/applications/neoprene-washers/) - [Nylon Flat Washers Non-Metallic Washers DIN 125 A](https://engineeringhardware.com/applications/nylon-flat-washers/) - [PTFE Flat Washers Non-Metallic Washers DIN 125 A](https://engineeringhardware.com/applications/ptfe-flat-washers/) - [SAE Flat Washers (Inch) SAE Flat Washers (Inch) SAE / ASME B18.22.1](https://engineeringhardware.com/applications/sae-flat-washers-inch/) - [Serrated Lock Washers Serrated Lock Washers DIN 6798](https://engineeringhardware.com/applications/serrated-lock-washers/) - [Shim Rings (Support Washers) Shim Rings & Shim Washers DIN 988](https://engineeringhardware.com/applications/shim-rings-din-988/) - [Spherical Washers & Conical Seats Spherical Washers & Conical Seats DIN 6319](https://engineeringhardware.com/applications/spherical-washers-din-6319/) - [Spiral-Wound Metal Gasket — GB/T 4622 / ASME B16.20 (Series 090) Spiral-Wound Gaskets GB/T 4622 / ASME B16.20](https://engineeringhardware.com/applications/cad-svg-090-gasket/) - [Spring Lock Washer — GB/T 93 / DIN 127B (Series 080) Spring Washers, Drawing Series GB/T 93 / DIN 127B](https://engineeringhardware.com/applications/cad-svg-080-springwasher/) - [Spring Lock Washer (GB/T 93) — GB/T 93 / DIN 127B (Series 081) Spring Washers, Drawing Series GB/T 93 / DIN 127B](https://engineeringhardware.com/applications/cad-svg-081-springwasher/) - [Spring Lock Washers Spring Lock Washers DIN 127](https://engineeringhardware.com/applications/spring-lock-washers/) - [Square Flat Washers (GB/T 96) Square Flat Washers GB/T 96](https://engineeringhardware.com/applications/square-flat-washers-gb-t-96/) - [Square Plate Washers (DIN 436) Square Plate Washers DIN 436](https://engineeringhardware.com/applications/square-plate-washers-din-436/) - [Structural Washers, Hardened (ASTM F436) Structural Washers ASTM F436](https://engineeringhardware.com/applications/structural-washers-astm-f436/) - [Tab Lock Washer for Round Nut — GB/T 858 (Series 072) Tab Washers for Round Nuts GB/T 858](https://engineeringhardware.com/applications/cad-svg-072-tabwasher/) - [Tab Washers (DIN 93 / DIN 463) Tab & Lockplate Washers DIN 93](https://engineeringhardware.com/applications/tab-washers-din-93/) - [Wave Washers (Curved Spring Washers) Wave Washers DIN 137 B](https://engineeringhardware.com/applications/wave-washers-din-137b/) - [Wedge / Taper Washer — GB/T 852 (Series 084) Taper (Wedge) Washers GB/T 852](https://engineeringhardware.com/applications/cad-svg-084-wedgewasher/) - [Wedge-Lock Washer Pairs Wedge-Lock Washers Trade series (cam wedge-lock pair)](https://engineeringhardware.com/applications/wedge-lock-washer-pairs/) ## Nails - [Clout (Slate) Nails, Standard and Wide Head Specialty Nails DIN 1160](https://engineeringhardware.com/applications/din-1160ab-clout-slate-nails/) - [Flat Head Nails for Automatic Nailers Wire Nails DIN 1143](https://engineeringhardware.com/applications/din-1143-flat-head-nail-automatic-nailer/) - [Gas Drive Pins Gas Drive Pins Trade series (collated gas drive pins)](https://engineeringhardware.com/applications/gas-drive-pins/) - [Landscape Fabric Staples and Sod Staples Landscape Fabric Staples Trade series (landscape staples)](https://engineeringhardware.com/applications/landscape-fabric-staples-and-sod-staples/) - [Large Round Head Nails for Wood Wool Panels Specialty Nails DIN 1144](https://engineeringhardware.com/applications/din-1144a-large-round-head-nail/) - [Lost Head Wire Nails Wire Nails DIN 1152](https://engineeringhardware.com/applications/din-1152-lost-head-wire-nail/) - [Railroad Cut and Dog Spikes Railroad Cut and Dog Spikes AREMA MRE Chapter 5, Part 2](https://engineeringhardware.com/applications/railroad-cut-and-dog-spikes/) - [Screw-Shank Nails Screw-Shank Nails Trade series (screw-shank nails)](https://engineeringhardware.com/applications/screw-shank-nails/) - [Specialty Nails Specialty Nails Industry standard](https://engineeringhardware.com/applications/specialty-nails/) - [Upholstery Tacks Upholstery Tacks Trade series (upholstery tacks)](https://engineeringhardware.com/applications/upholstery-tacks/) - [Wire Nails Wire Nails DIN 1151](https://engineeringhardware.com/applications/wire-nails/) ## Pins - [Ball-Lock Pins (T-Handle) Detent, Hitch & Quick-Release Pins Trade series (ball-lock quick pin)](https://engineeringhardware.com/applications/ball-lock-pins/) - [Clevis Pin — ISO / DIN (Series 101) CAD Clevis Pins ISO / DIN](https://engineeringhardware.com/applications/cad-svg-101-clevispin/) - [Clevis Pins (ISO 2341 / DIN 1444) Clevis Pins ISO 2341](https://engineeringhardware.com/applications/clevis-pins-iso-2341/) - [Clevis Pins with Head (No Cotter Pin Hole) Clevis Pins ISO 2341](https://engineeringhardware.com/applications/iso-2341a-clevis-pin-with-head/) - [Coiled Spring Pins (ISO 8750) Spring (Roll) Pins ISO 8750](https://engineeringhardware.com/applications/coiled-spring-pins-iso-8750/) - [Coiled Spring Pins, Heavy Duty Spring (Roll) Pins ISO 8748](https://engineeringhardware.com/applications/iso-8748-heavy-duty-coiled-spring-pin/) - [Coiled Spring Pins, Light Duty Spring (Roll) Pins ISO 8751](https://engineeringhardware.com/applications/iso-8751-light-duty-coiled-spring-pin/) - [Countersunk Head Grooved Pins Grooved Pins ISO 8747](https://engineeringhardware.com/applications/iso-8747-countersunk-head-grooved-pin/) - [Dowel Pins Dowel Pins ISO 8734 / DIN 6325](https://engineeringhardware.com/applications/dowel-pins/) - [Friction-Bearing Ball Spring Plungers Spring Plungers Trade series (GN 615.8)](https://engineeringhardware.com/applications/friction-bearing-ball-spring-plungers-gn-615-8/) - [Full-Length Grooved Pins with Pilot Grooved Pins ISO 8739](https://engineeringhardware.com/applications/iso-8739-full-length-grooved-pin-with-pilot/) - [Gravity Pins Gravity Pins Trade series (gravity pins)](https://engineeringhardware.com/applications/gravity-pins/) - [Grooved Pins (DIN 1471–1474) Grooved Pins DIN 1473](https://engineeringhardware.com/applications/grooved-pins-din-1471/) - [Grooved Pins, Taper and Center-Groove Types Grooved Pins ISO 8741 / ISO 8742 / ISO 8743 / ISO 8744 / ISO 8745](https://engineeringhardware.com/applications/iso-8741-8745-solid-grooved-pin-family/) - [Headless Clevis Pins (Plain and with Cotter Pin Holes) Clevis Pins ISO 2340](https://engineeringhardware.com/applications/iso-2340ab-headless-clevis-pins/) - [Hitch Pins with Clip Hole Detent, Hitch & Quick-Release Pins Trade series (hitch pin)](https://engineeringhardware.com/applications/hitch-pins/) - [Hub Shear Pins Hub Shear Pins Trade series (shear-hub pins)](https://engineeringhardware.com/applications/hub-shear-pins/) - [HVAC Duct Insulation Stick Pins Insulation Pins Trade series (adhesive-backed insulation pins)](https://engineeringhardware.com/applications/hvac-duct-insulation-stick-pins/) - [HVAC Duct Insulation Weld Pins Insulation Pins Trade series (capacitor-discharge weld pins)](https://engineeringhardware.com/applications/hvac-duct-insulation-weld-pins/) - [Indexing Plungers Indexing Plungers Trade series (GN 817)](https://engineeringhardware.com/applications/indexing-plungers-gn-817/) - [Internally Threaded Dowel Pin — GB/T 118 / ISO 8735 (Series 099) CAD Dowel Pins GB/T 118 / ISO 8735](https://engineeringhardware.com/applications/cad-svg-099-threadedpin/) - [Internally Threaded Dowel Pins (ISO 8735) Dowel Pins ISO 8735](https://engineeringhardware.com/applications/internally-threaded-dowel-pins/) - [Linch Pins (Spring-Leg Retaining Pins) Detent, Hitch & Quick-Release Pins Trade series (linch pin)](https://engineeringhardware.com/applications/linch-pins/) - [Parallel Dowel Pins, Unhardened Dowel Pins ISO 2338](https://engineeringhardware.com/applications/iso-2338-parallel-dowel-pin/) - [Quick-Release Pin Receptacles Quick-Release Pin Receptacles Trade series (quick-release pin receptacles)](https://engineeringhardware.com/applications/quick-release-pin-receptacles/) - [Quick-Release Pin Retaining Caps Quick-Release Pin Retaining Caps Trade series (quick-release pin retaining caps)](https://engineeringhardware.com/applications/quick-release-pin-retaining-caps/) - [Quick-Release Pins, Push-Button Detent, Hitch & Quick-Release Pins Trade series (push-button quick-release pin)](https://engineeringhardware.com/applications/quick-release-pins/) - [R-Clips (Hairpin Cotter Pins) Detent, Hitch & Quick-Release Pins Trade series (hairpin cotter)](https://engineeringhardware.com/applications/r-clips-hairpin-cotters/) - [Round Head Grooved Pins Grooved Pins ISO 8746](https://engineeringhardware.com/applications/iso-8746-round-head-grooved-pin/) - [Slotted Spring Pins, Heavy Duty Spring (Roll) Pins ISO 8752 / DIN 1481](https://engineeringhardware.com/applications/slotted-spring-pins-iso-8752/) - [Slotted Spring Pins, Light Duty Spring (Roll) Pins ISO 13337](https://engineeringhardware.com/applications/iso-13337-light-duty-slotted-spring-pin/) - [Split Cotter Pin — ISO / DIN (Series 102) CAD Cotter Pins ISO / DIN](https://engineeringhardware.com/applications/cad-svg-102-cotterpin/) - [Split Cotter Pins Split Cotter Pins ISO 1234 / DIN 94](https://engineeringhardware.com/applications/split-cotter-pins/) - [Spring (Roll) Pin — ISO / DIN (Series 103) CAD Spring Pins ISO / DIN](https://engineeringhardware.com/applications/cad-svg-103-rollpin/) - [Spring (Roll) Pins Spring (Roll) Pins ISO 8752 / DIN 1481](https://engineeringhardware.com/applications/spring-roll-pins/) - [Taper Pins Taper Pins ISO 2339 / DIN 1](https://engineeringhardware.com/applications/taper-pins/) - [Taper Pins with External Thread, Unhardened Taper Pins ISO 8737](https://engineeringhardware.com/applications/iso-8737-taper-pin-external-thread/) - [Taper Pins with Internal Thread, Unhardened Taper Pins ISO 8736](https://engineeringhardware.com/applications/iso-8736-taper-pin-internal-thread/) - [Threaded Spring Plungers Spring Plungers Trade series (GN 615)](https://engineeringhardware.com/applications/threaded-spring-plungers-gn-615/) ## Rivets - [Automotive Push-Type Retainers Panel Retainers Trade series (automotive push-type retainers)](https://engineeringhardware.com/applications/automotive-push-type-retainers/) - [Blind (Pop) Rivets Blind (Pop) Rivets ISO 15977 / DIN 7337](https://engineeringhardware.com/applications/blind-pop-rivets/) - [Blind Pop Rivet — GB/T 12618 / ISO 15977 (Series 098) CAD Blind Rivets GB/T 12618 / ISO 15977](https://engineeringhardware.com/applications/cad-svg-098-blindrivet/) - [Blind Rivet Nut Studs Blind Rivet Nut Studs Trade series (splined-body blind rivet studs)](https://engineeringhardware.com/applications/blind-rivet-nut-studs/) - [Cam-Lock Furniture Connectors Cam-Lock Furniture Connectors Trade series (cam-lock furniture connectors)](https://engineeringhardware.com/applications/cam-lock-furniture-connectors/) - [Clinch Clips Clinch Clips Trade series (wire-mesh clinch clips)](https://engineeringhardware.com/applications/clinch-clips/) - [Drive (Hammer) Rivets Drive (Hammer) Rivets Trade series (drive rivet)](https://engineeringhardware.com/applications/drive-hammer-rivets/) - [Fabric Snap Fasteners Fabric Snap Fasteners Trade series (fabric snap fasteners)](https://engineeringhardware.com/applications/fabric-snap-fasteners/) - [Hog Rings Hog Rings Trade series (hog rings)](https://engineeringhardware.com/applications/hog-rings/) - [Large-Diameter Lockbolt Assemblies (BS 7805-2) Lockbolt Assemblies BS 7805 Part 2:1997](https://engineeringhardware.com/applications/large-diameter-lockbolt-assemblies-bs-7805-2/) - [Panel Clips and U-Clips Panel Clips and U-Clips Trade series (edge-retaining panel clips)](https://engineeringhardware.com/applications/panel-clips-and-u-clips/) - [Pin-and-Collar Lockbolt Assemblies Lockbolt Assemblies Trade series (pin-and-collar lockbolt)](https://engineeringhardware.com/applications/pin-and-collar-lockbolt-assemblies/) - [Plastic Push Rivets (Trim Clips) Plastic Push Rivets Trade series (nylon push rivet)](https://engineeringhardware.com/applications/plastic-push-rivets/) - [Press-In and Flare-In Captive Screws Press-In and Flare-In Captive Screws Trade series (panel captive screws)](https://engineeringhardware.com/applications/press-in-and-flare-in-captive-screws/) - [Quarter-Turn Panel Fasteners Quarter-Turn Panel Fasteners Trade series (quarter-turn panel fasteners)](https://engineeringhardware.com/applications/quarter-turn-panel-fasteners/) - [Round Head Solid Rivet — GB/T 867 / DIN 660 (Series 097) CAD Solid Rivets GB/T 867 / DIN 660](https://engineeringhardware.com/applications/cad-svg-097-rivet/) - [Semi-Tubular Rivets Semi-Tubular Rivets Trade series (semi-tubular rivet)](https://engineeringhardware.com/applications/semi-tubular-rivets/) - [Small-Diameter Lockbolt Assemblies (BS 7805-1) Lockbolt Assemblies BS 7805 Part 1:1997](https://engineeringhardware.com/applications/small-diameter-lockbolt-assemblies-bs-7805-1/) - [Solid Rivets Solid Rivets ISO 1051 / DIN 660 / DIN 661](https://engineeringhardware.com/applications/solid-rivets/) - [Spring Button Clips Spring Button Clips Trade series (spring button clips)](https://engineeringhardware.com/applications/spring-button-clips/) - [Structural Breakstem Blind Rivets Structural Breakstem Blind Rivets Trade series (mechanically locked breakstem)](https://engineeringhardware.com/applications/structural-breakstem-blind-rivets/) - [Turn-Button Fastener Bases Turn-Button Fastener Bases Trade series (turn-button fastener bases)](https://engineeringhardware.com/applications/turn-button-fastener-bases/) - [Turn-Button Fastener Eyelets Turn-Button Fastener Eyelets Trade series (turn-button fastener eyelets)](https://engineeringhardware.com/applications/turn-button-fastener-eyelets/) ## Tools - [Ball-End Hex Keys Ball-End Hex Keys ISO 2936 (hexagon socket screw keys)](https://engineeringhardware.com/applications/ball-end-hex-keys/) - [Circlip Pliers (Internal and External) Circlip Pliers DIN 5254 (circlip pliers, forms A and B)](https://engineeringhardware.com/applications/circlip-pliers/) - [Cross-Recess Screwdriver Bits (PH / PZ) Screwdriver Bits DIN 3126 / ISO 1173 (C6.3 hexagon drive)](https://engineeringhardware.com/applications/cross-recess-screwdriver-bits/) - [Hand Riveters for Blind Rivets Setting & Installation Tools Trade series (blind rivet hand tools)](https://engineeringhardware.com/applications/hand-riveters/) - [Hand Tap Sets (Taper, Second and Plug) Taps & Dies DIN 352 (hand taps, set of three)](https://engineeringhardware.com/applications/hand-tap-sets/) - [Hex Bit Sockets Bit Sockets & Holders ISO 1174 (square drive) / ISO 2936 (hexagon key)](https://engineeringhardware.com/applications/hex-bit-sockets/) - [Hex Keys (Allen Keys) Hex Keys (Allen Keys) ISO 2936](https://engineeringhardware.com/applications/hex-keys-allen-keys/) - [Machine Taps (DIN 371 / DIN 376) Taps & Dies DIN 371 / DIN 376 / ISO 529](https://engineeringhardware.com/applications/machine-taps/) - [Magnetic Bit Holders and Extensions Bit Sockets & Holders DIN 3126 / ISO 1173 (C6.3 hexagon drive)](https://engineeringhardware.com/applications/magnetic-bit-holders/) - [Nut Drivers and Nut Setters Nut Drivers Trade series (hexagon nut drivers, across-flats sized)](https://engineeringhardware.com/applications/nut-drivers/) - [Rivet Nut Setting Tools Setting & Installation Tools Trade series (blind threaded insert setting tools)](https://engineeringhardware.com/applications/rivet-nut-setting-tools/) - [Round Split Dies and Die Stocks Taps & Dies DIN 22568 / DIN EN 22568 (round split dies)](https://engineeringhardware.com/applications/round-split-dies/) - [Security Bit Sets (Tamper-Resistant Drives) Screwdriver Bits Trade series (tamper-resistant driver bits)](https://engineeringhardware.com/applications/security-bit-sets/) - [Thread Insert Installation Tools Setting & Installation Tools DIN 8140 (wire thread inserts) — installation tooling](https://engineeringhardware.com/applications/thread-insert-installation-tools/) - [Thread Pitch Gauges Thread Gauges Trade series (metric and inch screw pitch gauges)](https://engineeringhardware.com/applications/thread-pitch-gauges/) - [Thread Plug and Ring Gauges Thread Gauges ISO 1502 (ISO general purpose metric screw threads — gauging)](https://engineeringhardware.com/applications/thread-plug-and-ring-gauges/) - [Torque Wrenches for Fastener Tightening Torque Tools ISO 6789 (hand torque tools — requirements and test methods)](https://engineeringhardware.com/applications/torque-wrenches/) - [Torx and Torx-Plus Screwdriver Bits Screwdriver Bits ISO 10664 / DIN 3126 C6.3](https://engineeringhardware.com/applications/torx-screwdriver-bits/) - [Torx Keys (L-Key and T-Handle) Torx Keys ISO 10664 (hexalobular internal driving feature)](https://engineeringhardware.com/applications/torx-keys/) ## Retaining Rings - [E-Clips (External Snap Rings) E-Clips (External Snap Rings) DIN 6799](https://engineeringhardware.com/applications/e-clips/) - [Grip Rings (Reinforced Shaft Retainers) Grip Rings Trade series (self-locking grip rings)](https://engineeringhardware.com/applications/grip-rings/) - [Retaining Ring (Circlip) — ISO / DIN (Series 147) CAD Retaining Rings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-147-ring/) - [Retaining Rings (Circlips) Retaining Rings (Circlips) DIN 471 / DIN 472](https://engineeringhardware.com/applications/retaining-rings-circlips/) - [Spiral Retaining Rings Spiral Retaining Rings Trade series (spiral wound retaining ring)](https://engineeringhardware.com/applications/spiral-retaining-rings/) - [Wave Circlips (Crescent Rings) Wave Circlips Trade series (wave and crescent retaining rings)](https://engineeringhardware.com/applications/wave-circlips/) ## Keys - [Feather (Sliding) Keys Feather (Sliding) Keys DIN 6885 Form B / sliding key practice](https://engineeringhardware.com/applications/feather-keys/) - [Gib-Head Taper Keys (DIN 6887) Gib-Head Taper Keys DIN 6887 (gib-head taper keys) — 1:100 taper](https://engineeringhardware.com/applications/gib-head-taper-keys/) - [Parallel Keys Parallel Keys DIN 6885 / ISO 773](https://engineeringhardware.com/applications/parallel-keys/) - [Taper Keys (DIN 6886) Taper Keys DIN 6886 (taper keys) — 1:100 taper](https://engineeringhardware.com/applications/taper-keys/) - [Woodruff Keys Woodruff Keys DIN 6888](https://engineeringhardware.com/applications/woodruff-keys/) ## Springs - [Compression Spring — ISO / DIN (Series 141) CAD Compression Springs ISO / DIN](https://engineeringhardware.com/applications/cad-svg-141-spring/) - [Compression Springs Compression Springs DIN 2098](https://engineeringhardware.com/applications/compression-springs/) - [Extension Spring — ISO / DIN (Series 143) CAD Extension Springs ISO / DIN](https://engineeringhardware.com/applications/cad-svg-143-extensionspring/) - [Extension Springs Extension Springs DIN 2097](https://engineeringhardware.com/applications/extension-springs/) - [Torsion Springs Torsion Springs DIN 2089](https://engineeringhardware.com/applications/torsion-springs/) ## Threaded Inserts - [Heat-Set Threaded Inserts for Plastic Heat-Set & Molded-In Inserts Trade series (heat-set insert)](https://engineeringhardware.com/applications/heat-set-threaded-inserts/) - [Helical Thread Inserts Helical Thread Inserts DIN 8140](https://engineeringhardware.com/applications/helical-thread-inserts/) - [Key-Locking Threaded Inserts Key-Locking Inserts Trade series (key-locking insert)](https://engineeringhardware.com/applications/key-locking-threaded-inserts/) - [Self-Tapping Threaded Inserts Self-Tapping Inserts Trade series (self-tapping insert)](https://engineeringhardware.com/applications/self-tapping-threaded-inserts/) - [Tube-End Threaded Inserts Tube-End Threaded Inserts Trade series (pressed tube-end inserts)](https://engineeringhardware.com/applications/tube-end-threaded-inserts/) - [Unthreaded Compression Limiters Unthreaded Compression Limiters Trade series (compression limiters)](https://engineeringhardware.com/applications/unthreaded-compression-limiters/) ## Pipe & Pneumatic Fittings - [BSP Pipe Thread Fittings BSP Pipe Thread Fittings ISO 228 (G)](https://engineeringhardware.com/applications/bsp-pipe-thread-fittings/) - [Grease Nipples (DIN 71412) Grease Nipples DIN 71412 / ISO 6392 (lubricating nipples)](https://engineeringhardware.com/applications/grease-nipples/) - [Hex Socket Pipe Plugs Pipe Plugs DIN 906 (taper thread) / DIN 908 (parallel thread with seal)](https://engineeringhardware.com/applications/hex-socket-pipe-plugs/) - [Hydraulic Compression Fittings Hydraulic Compression Fittings DIN 2353](https://engineeringhardware.com/applications/hydraulic-compression-fittings/) - [JIC 37-Degree Flare Fittings Flare Fittings SAE J514 / ISO 8434-2 (37-degree flared connections)](https://engineeringhardware.com/applications/jic-flare-fittings/) - [NPT Pipe Thread Fittings NPT Pipe Thread Fittings ASME B1.20.1](https://engineeringhardware.com/applications/npt-pipe-thread-fittings/) - [Push-In Pneumatic Fittings Push-In Pneumatic Fittings Industry standard](https://engineeringhardware.com/applications/push-in-pneumatic-fittings/) ## Bearings & Bushings - [Angular Contact Ball Bearing — ISO / DIN (Series 109) CAD Ball Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-109-angcontactbearing/) - [Cylindrical Roller Bearing — ISO / DIN (Series 112) CAD Roller Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-112-rollerbearing/) - [Deep Groove Ball Bearing — ISO / DIN (Series 118) CAD Ball Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-118-ballbearing/) - [Flanged Sleeve Bushing — ISO / DIN (Series 135) CAD Bushings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-135-bushing/) - [Housed (Pillow Block) Bearing — ISO / DIN (Series 117) CAD Housed Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-117-housedbearing/) - [Needle Roller Bearing — ISO / DIN (Series 133) CAD Roller Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-133-needlebearing/) - [Rod End Bearing — ISO / DIN (Series 106) CAD Rod End Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-106-rodend/) - [Tapered Roller Bearing — ISO / DIN (Series 116) CAD Roller Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-116-taperbearing/) - [Thrust Bearing — ISO / DIN (Series 110) CAD Thrust Bearings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-110-thrustbearing/) ## Rigging Hardware - [Drop-Forged Wire Rope Clips Wire Rope Clips Trade series (drop-forged wire rope clips)](https://engineeringhardware.com/applications/drop-forged-wire-rope-clips/) - [Jaw-and-Jaw Turnbuckles Turnbuckles Trade series (jaw-and-jaw turnbuckles)](https://engineeringhardware.com/applications/jaw-and-jaw-turnbuckles/) - [Screw-Pin Anchor Shackles Shackles ASME B30.26](https://engineeringhardware.com/applications/screw-pin-anchor-shackles/) - [Turnbuckle — ISO / DIN (Series 156) CAD Turnbuckles ISO / DIN](https://engineeringhardware.com/applications/cad-svg-156-turnbuckle/) - [Wire Rope — ISO / DIN (Series 152) CAD Wire Rope ISO / DIN](https://engineeringhardware.com/applications/cad-svg-152-wirerope/) - [Wire Rope Clip (U-Bolt) — ISO / DIN (Series 157) CAD Wire Rope Clips ISO / DIN](https://engineeringhardware.com/applications/cad-svg-157-ropeclip/) - [Wire Rope Thimble — ISO / DIN (Series 155) CAD Rope Thimbles ISO / DIN](https://engineeringhardware.com/applications/cad-svg-155-ropethimble/) ## Seals - [Anaerobic Threadlockers and Thread Sealants Thread Sealants & Threadlockers Trade series (anaerobic adhesives for threaded assemblies)](https://engineeringhardware.com/applications/anaerobic-threadlockers/) - [AS568 O-Rings (Inch Series) AS568 O-Rings (Inch Series) AS 568](https://engineeringhardware.com/applications/as568-o-rings-inch/) - [Metric O-Rings (ISO 3601) Metric O-Rings ISO 3601-1 (fluid power — O-rings, inside diameters and cross-sections)](https://engineeringhardware.com/applications/metric-o-rings/) - [O-Ring Seal — ISO / DIN (Series 159) CAD O-Rings ISO / DIN](https://engineeringhardware.com/applications/cad-svg-159-oring/) - [PTFE Thread Seal Tape Thread Sealants & Threadlockers Trade series (PTFE thread sealing tape, colour-coded by density)](https://engineeringhardware.com/applications/ptfe-thread-seal-tape/) - [USIT Rings (Self-Centring Bonded Seals) Bonded Seal Rings Trade series (self-centring bonded washers, USIT type)](https://engineeringhardware.com/applications/usit-rings/) ## General Components - [Custom Machined Component — ISO / DIN (Series 115) CAD Components ISO / DIN](https://engineeringhardware.com/applications/cad-svg-115-genericpart/) ## Shaft Collars - [One-Piece Clamp Shaft Collars Clamp Shaft Collars Trade series (one-piece clamp-type shaft collars)](https://engineeringhardware.com/applications/one-piece-clamp-shaft-collars/) - [Set Screw Shaft Collars Set Screw Shaft Collars DIN 705 A](https://engineeringhardware.com/applications/set-screw-shaft-collars-din-705a/) - [Threaded Shaft Collars Threaded Shaft Collars Trade series (threaded-bore shaft collars)](https://engineeringhardware.com/applications/threaded-shaft-collars/) - [Two-Piece Clamp Shaft Collars Clamp Shaft Collars Trade series (two-piece clamp-type shaft collars)](https://engineeringhardware.com/applications/two-piece-clamp-shaft-collars/) ## Standoffs & Spacers - [Adhesive-Mount Threaded Studs Adhesive-Mount Threaded Studs Trade series (adhesive-backed threaded studs)](https://engineeringhardware.com/applications/adhesive-mount-threaded-studs/) - [Fully-Threaded Standoff Caps Fully-Threaded Standoff Caps Trade series (fully threaded standoff caps)](https://engineeringhardware.com/applications/fully-threaded-standoff-caps/) - [Hex Standoffs, Female-Female Hex Standoffs Industry standard](https://engineeringhardware.com/applications/hex-standoffs-female-female/) - [Hex Standoffs, Male-Female Round & Male-Female Standoffs Trade series (male-female standoff)](https://engineeringhardware.com/applications/hex-standoffs-male-female/) - [Low-Profile Captive Pins Low-Profile Captive Pins Trade series (captive tack pins)](https://engineeringhardware.com/applications/low-profile-captive-pins/) - [PCB Edge-Locking Supports PCB Supports Trade series (edge-locking board supports)](https://engineeringhardware.com/applications/pcb-edge-locking-supports/) - [Peel-Away Laminated Shims Slotted & Laminated Shims Trade series (laminated peelable shim)](https://engineeringhardware.com/applications/peel-away-laminated-shims/) - [Precision Round Shims Precision Shims DIN 988](https://engineeringhardware.com/applications/precision-round-shims/) - [Round Shims, Inch Series Inch Series Shims Trade series (inch shim)](https://engineeringhardware.com/applications/round-shims-inch/) - [Round Standoffs, Female-Female Round & Male-Female Standoffs Trade series (round standoff)](https://engineeringhardware.com/applications/round-standoffs-female-female/) - [Slotted Shims (Horseshoe) Slotted & Laminated Shims Trade series (slotted alignment shim)](https://engineeringhardware.com/applications/slotted-shims-horseshoe/) - [Snap-In PCB Standoffs PCB Standoffs & Snap-In Supports Trade series (nylon snap-in support)](https://engineeringhardware.com/applications/snap-in-pcb-standoffs/) - [Solderable SMT Spacers Solderable SMT Spacers Trade series (solderable SMT spacers)](https://engineeringhardware.com/applications/solderable-smt-spacers/) - [Unthreaded Round Spacers Unthreaded Spacers Trade series (plain bore spacer)](https://engineeringhardware.com/applications/unthreaded-round-spacers/) ## Anchors & Concrete Fixings - [Chemical Anchor Studs (Resin-Bonded) Chemical & Adhesive Anchors Trade series (bonded anchor stud)](https://engineeringhardware.com/applications/chemical-anchor-studs/) - [Commercial Ground Screw Anchors Commercial Ground Screw Anchors Trade series (commercial ground screw anchors)](https://engineeringhardware.com/applications/commercial-ground-screw-anchors/) - [Concrete Coil Rods, Coil Nuts and Coil Bolts Formwork Hardware Trade series (coil thread formwork hardware)](https://engineeringhardware.com/applications/concrete-coil-rods-coil-nuts-and-coil-bolts/) - [Concrete Formwork Snap-Tie Wedges Formwork Hardware Trade series (snap-tie wedges)](https://engineeringhardware.com/applications/concrete-formwork-snap-tie-wedges/) - [Concrete Formwork Wedge Bolts Formwork Hardware Trade series (formwork wedge bolts and pins)](https://engineeringhardware.com/applications/concrete-formwork-wedge-bolts/) - [Concrete Screw Anchors Concrete Screw Anchors Trade series (HUS4)](https://engineeringhardware.com/applications/concrete-screw-anchors/) - [Drive Anchors (Nail-In Anchors) Drive & Nail-In Anchors Trade series (nail-in anchor)](https://engineeringhardware.com/applications/drive-anchors/) - [Drive-In Metal Hollow Wall Anchors Drywall Anchors Trade series (drive-in hollow wall anchors)](https://engineeringhardware.com/applications/drive-in-metal-hollow-wall-anchors/) - [Drop-In Anchors (Internally Threaded) Drop-In Anchors Trade series (displacement-controlled anchor)](https://engineeringhardware.com/applications/drop-in-anchors/) - [Hammer-Drive Gecko Anchors Hammer-Drive Anchors Trade series (slotted drive-in anchors)](https://engineeringhardware.com/applications/hammer-drive-gecko-anchors/) - [Headed Concrete Anchor and Shear Connector Studs Shear Connector Studs Trade series (headed shear connector studs)](https://engineeringhardware.com/applications/headed-concrete-anchor-and-shear-connector-studs/) - [Heavy-Duty Roofing Insulation Fasteners Insulation Fasteners Trade series (roof insulation fasteners and plates)](https://engineeringhardware.com/applications/heavy-duty-roofing-insulation-fasteners/) - [Hollow Wall Anchors (Molly Bolts) Hollow Wall & Toggle Anchors Trade series (metal cavity anchor)](https://engineeringhardware.com/applications/hollow-wall-anchors/) - [Lag Shields (Lag Screw Anchors) Lag Shields & Machine Screw Anchors Trade series (zamak lag shield)](https://engineeringhardware.com/applications/lag-shields/) - [Metal Screw-In Drywall Anchors Drywall Anchors Trade series (screw-in drywall anchors)](https://engineeringhardware.com/applications/metal-screw-in-drywall-anchors/) - [Metal Serrated Expansion Wall Plugs Expansion Wall Plugs Trade series (serrated metal expansion tubes)](https://engineeringhardware.com/applications/metal-serrated-expansion-wall-plugs/) - [Plastic Expansion Wall Plugs Expansion Wall Plugs JG/T 139 / ETAG 020](https://engineeringhardware.com/applications/plastic-expansion-wall-plugs/) - [Screw-In Camping Ground Anchors Screw-In Ground Anchors Trade series (recreational ground anchors)](https://engineeringhardware.com/applications/screw-in-camping-ground-anchors/) - [Self-Drilling Drywall Anchors Drywall Anchors Trade series (self-drilling drywall anchors)](https://engineeringhardware.com/applications/self-drilling-drywall-anchors/) - [Self-Drilling Hollow Wall Anchors Drywall Anchors Trade series (self-drilling hollow wall anchors)](https://engineeringhardware.com/applications/self-drilling-hollow-wall-anchors/) - [Self-Undercutting Mechanical Anchors Self-Undercutting Anchors Trade series (HDA-T)](https://engineeringhardware.com/applications/self-undercutting-mechanical-anchors/) - [Short Metal Self-Drilling Drywall Anchors Drywall Anchors Trade series (short-body self-drilling anchors)](https://engineeringhardware.com/applications/short-metal-self-drilling-drywall-anchors/) - [Sleeve Anchors Sleeve Anchors Trade series (sleeve expansion anchor)](https://engineeringhardware.com/applications/sleeve-anchors/) - [Spring Toggle Anchors Hollow Wall & Toggle Anchors Trade series (spring toggle)](https://engineeringhardware.com/applications/spring-toggle-anchors/) - [Threaded Rod Hanger Anchors Threaded Rod Hanger Anchors Trade series (rod hanger anchors)](https://engineeringhardware.com/applications/threaded-rod-hanger-anchors/) - [Wedge Anchors (Through-Bolt) Wedge & Stud Anchors Trade series (torque-controlled expansion anchor)](https://engineeringhardware.com/applications/wedge-anchors/) - [Y-Beam Tent Stakes and Ground Pegs Y-Beam Tent Stakes and Ground Pegs Trade series (tent and shelter stakes)](https://engineeringhardware.com/applications/y-beam-tent-stakes-and-ground-pegs/) ## Supports, Clamps & Brackets - [Adjustable Clevis Pipe Hangers Pipe Hangers Trade series (adjustable clevis hangers, MSS SP-58 type 1)](https://engineeringhardware.com/applications/adjustable-clevis-pipe-hangers/) - [Adjustable Swivel Ring Pipe Hangers Pipe Hangers Trade series (swivel ring hangers, MSS SP-58 type 10/11)](https://engineeringhardware.com/applications/adjustable-swivel-ring-pipe-hangers/) - [Beam C-Clamps with Set Screw and Lock Nut Beam C-Clamps Trade series (C-clamps with locking nut)](https://engineeringhardware.com/applications/beam-c-clamps-with-set-screw-and-lock-nut/) - [Beam Clamps Beam Clamps Trade series (tiger-type beam clamps)](https://engineeringhardware.com/applications/beam-clamps/) - [Channel Brackets and Fittings Channel Brackets & Fittings Trade series (strut channel brackets and fittings)](https://engineeringhardware.com/applications/channel-brackets-and-fittings/) - [Pipe Riser Clamps Riser Clamps Trade series (riser clamps, MSS SP-58 type 8)](https://engineeringhardware.com/applications/pipe-riser-clamps/) - [Solar Flashing Lag-Bolt Roof Attachments Solar Roof Attachments Trade series (flashed lag-bolt roof attachments)](https://engineeringhardware.com/applications/solar-flashing-lag-bolt-roof-attachments/) - [Solar Hanger Bolt Sets Solar Roof Attachments Trade series (solar hanger bolt sets)](https://engineeringhardware.com/applications/solar-hanger-bolt-sets/) - [Solar Tile Roof Hooks Solar Roof Attachments Trade series (tile roof mounting hooks)](https://engineeringhardware.com/applications/solar-tile-roof-hooks/) - [Standing-Seam Roof Clamps with Set Screws Solar Roof Attachments Trade series (standing seam clamps)](https://engineeringhardware.com/applications/standing-seam-roof-clamps-with-set-screws/) - [Strut Channel Plain Nuts and Top Retainer Nuts Strut Channel Nuts Trade series (strut channel nuts)](https://engineeringhardware.com/applications/strut-channel-plain-nuts-and-top-retainer-nuts/) - [Triangle Galvanized Steel Brackets Structural Brackets Trade series (hot-dip galvanized triangle brackets)](https://engineeringhardware.com/applications/triangle-galvanized-steel-brackets/) - [Universal Beam C-Clamps Beam C-Clamps Trade series (universal C-clamps)](https://engineeringhardware.com/applications/universal-beam-c-clamps/) - [Wing-Type Pipe Clips Pipe Clips Trade series (wing-type channel pipe clips)](https://engineeringhardware.com/applications/wing-type-pipe-clips/) ## Clamps & Couplings - [Constant-Tension Worm Gear Hose Clamps Hose Clamps Trade series (spring-loaded worm gear clamps)](https://engineeringhardware.com/applications/constant-tension-worm-gear-hose-clamps/) - [Exhaust U-Bolt and Band Clamps Band & V-Band Clamps Trade series (exhaust clamps)](https://engineeringhardware.com/applications/exhaust-u-bolt-and-band-clamps/) - [Exhaust V-Band Clamps Band & V-Band Clamps Trade series (V-band clamps and flanges)](https://engineeringhardware.com/applications/exhaust-v-band-clamps/) - [Sanitary Tri-Clamp Clamps Sanitary Clamps Trade series (sanitary tri-clamp fittings)](https://engineeringhardware.com/applications/sanitary-tri-clamp-clamps/) - [Stepless Ear Clamps Hose Clamps Trade series (stepless ear clamps)](https://engineeringhardware.com/applications/stepless-ear-clamps/) - [T-Bolt Hose Clamps Hose Clamps Trade series (T-bolt hose clamps)](https://engineeringhardware.com/applications/t-bolt-hose-clamps/) - [Worm-Drive Hose Clamps Hose Clamps Trade series (worm-drive hose clamps)](https://engineeringhardware.com/applications/worm-drive-hose-clamps/) ## Cable & Cord Management - [Adhesive Cable Tie Mounts Cable Tie Mounts Trade series (adhesive-backed tie mounts)](https://engineeringhardware.com/applications/adhesive-cable-tie-mounts/) - [DIN Rail End Stops and End Brackets DIN Rail Accessories Trade series (DIN rail end stops)](https://engineeringhardware.com/applications/din-rail-end-stops-and-end-brackets/) - [Liquid-Tight Cordgrips Strain Relief & Cordgrips Trade series (liquid-tight cord grips)](https://engineeringhardware.com/applications/liquid-tight-cordgrips/) - [Nylon Cable Ties Cable Ties Trade series (nylon 6/6 cable ties)](https://engineeringhardware.com/applications/nylon-cable-ties/) - [P-Clips and Cushioned Clamps (DIN 3015) P-Clips & Cushioned Clamps DIN 3015 (pipe clamps) / trade rubber-lined P-clips](https://engineeringhardware.com/applications/p-clips-and-cushioned-clamps/) - [Push-Barb Cable Tie Mounts Cable Tie Mounts Trade series (push-in barbed tie mounts)](https://engineeringhardware.com/applications/push-barb-cable-tie-mounts/) - [Screw-Applied Cable Tie Mounts Cable Tie Mounts Trade series (screw-fixed tie mounts)](https://engineeringhardware.com/applications/screw-applied-cable-tie-mounts/) - [Snap-In Strain Relief Bushings Strain Relief & Cordgrips Trade series (snap-in strain relief bushings)](https://engineeringhardware.com/applications/snap-in-strain-relief-bushings/) - [Split-Panel Strain Relief Bushings Strain Relief & Cordgrips Trade series (split strain relief bushings)](https://engineeringhardware.com/applications/split-panel-strain-relief-bushings/) - [Stainless Steel Cable Ties Cable Ties Trade series (stainless steel cable ties)](https://engineeringhardware.com/applications/stainless-steel-cable-ties/) ## Panel Latches & Catches - [Cam Latches Cam Latches Trade series (quarter-turn cam latches)](https://engineeringhardware.com/applications/cam-latches/) - [Compression Latches Compression Latches Trade series (compression cam latches)](https://engineeringhardware.com/applications/compression-latches/) - [Flexible Draw Latches Draw Latches Trade series (flexible draw latches)](https://engineeringhardware.com/applications/flexible-draw-latches/) - [Over-Centre Draw Latches Draw Latches Trade series (over-centre toggle latches)](https://engineeringhardware.com/applications/over-centre-draw-latches/) - [Paddle Latches Paddle Latches Trade series (recessed paddle handle latches)](https://engineeringhardware.com/applications/paddle-latches/) - [Slam Latches Slam Latches Trade series (push-to-close slam latches)](https://engineeringhardware.com/applications/slam-latches/) - [Toggle Latches (Draw Latches) Toggle Latches Trade series (over-centre toggle latches)](https://engineeringhardware.com/applications/toggle-latches/)