---
title: "What Are Adhesive Cable Tie Mounts Used For?"
description: "Adhesive Cable Tie Mounts (Trade series (adhesive-backed tie mounts)) are used for routing, bundling and strain-relieving cable at a panel entry or a fixing…"
url: https://engineeringhardware.com/applications/adhesive-cable-tie-mounts/
source: Engineering Hardware & Fasteners
---

# What Are Adhesive Cable Tie Mounts Used For?

Cable & Cord Management · Trade series (adhesive-backed tie mounts) · Application guide

Typical applications, the industries that specify adhesive cable tie mounts, and how to choose the right size, material and finish for the joint.

Adhesive Cable Tie Mounts are used for routing, bundling and strain-relieving cable at a panel entry or a fixing point. They are manufactured to Trade series (adhesive-backed tie mounts), and selection is driven by the size designation, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Routing, bundling and strain-relieving cable at a panel entry or a fixing point
- **Governing standard:** Trade series (adhesive-backed tie mounts)
- **Category:** Cable & Cord Management

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Adhesive Cable Tie Mounts Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Adhesive-Cable-Tie-Mounts.webp)

Adhesive Cable Tie Mounts are used primarily for routing, bundling and strain-relieving cable at a panel entry or a fixing point. This page lists the industries and assemblies where they are specified, the selection criteria that matter for each application, installation practice, and the cases where a different fastener type is the correct choice. Parts are supplied to Trade series (adhesive-backed tie mounts).

## Typical Applications for Adhesive Cable Tie Mounts

The most common settings where these are specified:

- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.

Product catalog

## Related Cable Tie Mounts products

[![Gl1419 Rail Clip Clamp](https://img.engineeringhardware.com/Gl1419-Rail-Clip-Clamp.webp)](https://engineeringhardware.com/product/gl1419-rail-clip-clamp/)

Pipe, Tube, Beam & Cable Clamps

### [Gl1419 Rail Clip Clamp](https://engineeringhardware.com/product/gl1419-rail-clip-clamp/)

DIN, ASTM, BS · Clip

**US$2.40 – 12.00**MOQ 10 pieces

[![Hot Selling Dbd Series Double Blister Cable Clips](https://img.engineeringhardware.com/Hot-Selling-Dbd-Series-Double-Blister-Cable-Clips.webp)](https://engineeringhardware.com/product/hot-selling-dbd-series-double-blister-cable-clips/)

Pipe, Tube, Beam & Cable Clamps

### [Hot Selling Dbd Series Double Blister Cable Clips](https://engineeringhardware.com/product/hot-selling-dbd-series-double-blister-cable-clips/)

Cable Clamp · Plastic

**US$0.30**MOQ 100 bags

[![Single Bolt Cable Clamp Stainless Steel 2-10mm Simplex Wire Rope Clip](https://img.engineeringhardware.com/Single-Bolt-Cable-Clamp-Stainless-Steel-2-10mm-Simplex-Wire-Rope-Clip.webp)](https://engineeringhardware.com/product/single-bolt-cable-clamp-stainless-steel-2-10mm-simplex-wire-rope-clip/)

Pipe, Tube, Beam & Cable Clamps

### [Single Bolt Cable Clamp Stainless Steel 2-10mm Simplex Wire Rope Clip](https://engineeringhardware.com/product/single-bolt-cable-clamp-stainless-steel-2-10mm-simplex-wire-rope-clip/)

Standard · Stainless Steel

**US$0.18 – 3.60**MOQ 1,000 pieces

[![Electrical Insulated Cable Clamp Insulation 2 Bolt Piercing Connectors](https://img.engineeringhardware.com/Electrical-Insulated-Cable-Clamp-Insulation-2-Bolt-Piercing-Connectors.webp)](https://engineeringhardware.com/product/electrical-insulated-cable-clamp-insulation-2-bolt-piercing-connectors/)

Pipe, Tube, Beam & Cable Clamps

### [Electrical Insulated Cable Clamp Insulation 2 Bolt Piercing Connectors](https://engineeringhardware.com/product/electrical-insulated-cable-clamp-insulation-2-bolt-piercing-connectors/)

Terminal Clamp · GB

**US$1.31 – 1.68**MOQ 200 pieces

[![Tiger Beam Clamp for Screw Rod Hanger Brace of Steel Structure M10/M12 Cast Steel Jaws Clamp](https://img.engineeringhardware.com/Tiger-Beam-Clamp-for-Screw-Rod-Hanger-Brace-of-Steel-Structure-M10-M12-Cast-Steel-Jaws-Clamp.webp)](https://engineeringhardware.com/product/tiger-beam-clamp-for-screw-rod-hanger-brace-of-steel-structure-m10-m12-cast-steel/)

Pipe, Tube, Beam & Cable Clamps

### [Tiger Beam Clamp for Screw Rod Hanger Brace of Steel Structure M10/M12 Cast Steel Jaws Clamp](https://engineeringhardware.com/product/tiger-beam-clamp-for-screw-rod-hanger-brace-of-steel-structure-m10-m12-cast-steel/)

Beam Clamps · GB, ASTM, DIN, JIS, AISI, BS

**US$0.012 – 5.99**MOQ 1 piece

[![PVC Pipe Clamp for Garden Water Pipes Locking Tube Holder Snap Clip](https://img.engineeringhardware.com/PVC-Pipe-Clamp-for-Garden-Water-Pipes-Locking-Tube-Holder-Snap-Clip.webp)](https://engineeringhardware.com/product/pvc-pipe-clamp-for-garden-water-pipes-locking-tube-holder-snap-clip/)

Pipe, Tube, Beam & Cable Clamps

### [PVC Pipe Clamp for Garden Water Pipes Locking Tube Holder Snap Clip](https://engineeringhardware.com/product/pvc-pipe-clamp-for-garden-water-pipes-locking-tube-holder-snap-clip/)

GB/ASTM/DIN/BS · Plastic

**US$0.22 – 0.36**MOQ 3,000 pieces

[View all Pipe, Tube, Beam & Cable Clamps →](https://engineeringhardware.com/fastener-products/clamps-clips-cable-ties/pipe-tube-beam-cable-clamps/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Adhesive Cable Tie Mounts for Your Application

- **Size:** Match the size to the mating part — see the dimension table below for each option.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (adhesive-backed tie mounts). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Where Adhesive Cable Tie Mounts Are Not the Right Choice

Match the fastener to the load, environment and whether the joint must be reopened; the wrong class or style is the usual cause of joint failure.

Custom manufacturing · Made to drawing

## Need a adhesive cable tie mounts outside the standard range?

With no standard to depart from, the tolerance scheme is the specification — which dimensions are critical, and which are simply nominal.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom cable management manufacturing](https://engineeringhardware.com/custom/cable-management/)[Send a drawing](https://engineeringhardware.com/custom/cable-management/#rfq)

## Technical Drawing

Dimensioned line drawing of acrylic adhesive pad Adhesive Cable Tie Mounts to Trade series (adhesive-backed tie mounts). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Mount form:** four-way entry base
- **Surface requirement:** clean, dry, above the adhesive minimum temperature
- **Screw hole:** yes, for secondary fixing
- **Limitation:** load limited by the adhesive bond

## Dimensions & Specifications (Trade series (adhesive-backed tie mounts))

| Backing | Mount form | Surface requirement | Screw hole | Limitation |
| --- | --- | --- | --- | --- |
| acrylic adhesive pad | four-way entry base | clean, dry, above the adhesive minimum temperature | yes, for secondary fixing | load limited by the adhesive bond |
| acrylic adhesive pad | saddle base | clean, dry, above the adhesive minimum temperature | yes, for secondary fixing | load limited by the adhesive bond |
| high-tack adhesive pad | four-way entry base | clean, dry, prepared surface | yes, for secondary fixing | not for textured or low-energy plastics |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What are Adhesive Cable Tie Mounts used for?

Routing, bundling and strain-relieving cable at a panel entry or a fixing point. They are supplied to Trade series (adhesive-backed tie mounts).

### Which industries use Adhesive Cable Tie Mounts?

They are commonly specified in general machine building, maintenance & repair (mro) and fabrication & metalwork, among other sectors.

### How do I choose the right size of Adhesive Cable Tie Mounts?

Match the size to the mating part using the dimension table on this page.

### Are Adhesive Cable Tie Mounts made to a recognized standard?

Yes — they are manufactured to Trade series (adhesive-backed tie mounts), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### Can I get a quote for Adhesive Cable Tie Mounts in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Adhesive Cable Tie Mounts — specifications & sizes](https://engineeringhardware.com/fastener/adhesive-cable-tie-mounts/)

### Adhesive Cable Tie Mounts Specification Guides

### Related Fastener Applications