---
title: "What Are Adjustable Swivel Ring Pipe Hangers Used For?"
description: "Adjustable Swivel Ring Pipe Hangers (Trade series (swivel ring hangers, MSS SP-58 type 10/11)) are used for carrying or reinforcing a run of pipe, tray or ra…"
url: https://engineeringhardware.com/applications/adjustable-swivel-ring-pipe-hangers/
source: Engineering Hardware & Fasteners
---

# What Are Adjustable Swivel Ring Pipe Hangers Used For?

Supports, Clamps & Brackets · Trade series (swivel ring hangers, MSS SP-58 type 10/11) · Application guide

Typical applications, the industries that specify adjustable swivel ring pipe hangers, and how to choose the right size, material and finish for the joint.

Adjustable Swivel Ring Pipe Hangers are used for carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. They are manufactured to Trade series (swivel ring hangers, MSS SP-58 type 10/11), and selection is driven by the nominal size, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing
- **Governing standard:** Trade series (swivel ring hangers, MSS SP-58 type 10/11)
- **Category:** Supports, Clamps & Brackets

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Adjustable Swivel Ring Pipe Hangers Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Adjustable-Swivel-Ring-Pipe-Hangers.webp)

Application guide for Adjustable Swivel Ring Pipe Hangers to Trade series (swivel ring hangers, MSS SP-58 type 10/11). The core duty of the type is carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. The typical industries, the how-to-specify checklist, assembly practice and the exclusion cases are set out below.

## Typical Applications for Adjustable Swivel Ring Pipe Hangers

The most common settings where these are specified:

- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.

Product catalog

## Related Pipe Hangers products

[![3/8 1/2 3/4 R Nylon Electrical Wire Cable Clip Cable Clamp with CE ISO9001](https://img.engineeringhardware.com/3-8-1-2-3-4-R-Nylon-Electrical-Wire-Cable-Clip-Cable-Clamp-with-CE-ISO9001.webp)](https://engineeringhardware.com/product/3-8-1-2-3-4-r-nylon-electrical-wire-cable-clip-cable-clamp-with-ce-iso9001/)

Pipe, Tube, Beam & Cable Clamps

### [3/8 1/2 3/4 R Nylon Electrical Wire Cable Clip Cable Clamp with CE ISO9001](https://engineeringhardware.com/product/3-8-1-2-3-4-r-nylon-electrical-wire-cable-clip-cable-clamp-with-ce-iso9001/)

Standard · Plastic

**US$0.012**MOQ 1,000 pieces

[![Rubber Lined P Clips Hose Pipe Clamp Stainless Steel](https://img.engineeringhardware.com/Rubber-Lined-P-Clips-Hose-Pipe-Clamp-Stainless-Steel.webp)](https://engineeringhardware.com/product/rubber-lined-p-clips-hose-pipe-clamp-stainless-steel/)

Pipe, Tube, Beam & Cable Clamps

### [Rubber Lined P Clips Hose Pipe Clamp Stainless Steel](https://engineeringhardware.com/product/rubber-lined-p-clips-hose-pipe-clamp-stainless-steel/)

Rubber Clamp · Standard

**US$0.096 – 0.12**MOQ 200 pieces

[![18mm Plastic Cable Clip, K-Type Round PE Cable Clamp, Electrical Wire Clip, CE RoHS 500/Bags](https://img.engineeringhardware.com/18mm-Plastic-Cable-Clip-K-Type-Round-PE-Cable-Clamp-Electrical-Wire-Clip-CE-RoHS-500-Bags.webp)](https://engineeringhardware.com/product/18mm-plastic-cable-clip-k-type-round-pe-cable-clamp-electrical-wire-clip-ce-rohs-500/)

Pipe, Tube, Beam & Cable Clamps

### [18mm Plastic Cable Clip, K-Type Round PE Cable Clamp, Electrical Wire Clip, CE RoHS 500/Bags](https://engineeringhardware.com/product/18mm-plastic-cable-clip-k-type-round-pe-cable-clamp-electrical-wire-clip-ce-rohs-500/)

K-Type Round Cable Clip · PE Polyethylene + Steel Nail

**US$9.56 – 10.07**MOQ 20 bags

[![Aluminum Alloy Anchor Tension Clamp Cable Hanging PAL2000 Optical Fiber Cable Clamp](https://img.engineeringhardware.com/Aluminum-Alloy-Anchor-Tension-Clamp-Cable-Hanging-PAL2000-Optical-Fiber-Cable-Clamp.webp)](https://engineeringhardware.com/product/aluminum-alloy-anchor-tension-clamp-cable-hanging-pal2000-optical-fiber-cable-clamp/)

Pipe, Tube, Beam & Cable Clamps

### [Aluminum Alloy Anchor Tension Clamp Cable Hanging PAL2000 Optical Fiber Cable Clamp](https://engineeringhardware.com/product/aluminum-alloy-anchor-tension-clamp-cable-hanging-pal2000-optical-fiber-cable-clamp/)

FTTH Drop Cable Clamp · Alufer+PA6+Galvanized Steel

**US$2.22**MOQ 1,000 pieces

[![Factory Supply Custom Heavy Duty Plastic Hose Coupling C/U Clamp, Pipe Fittings Clip](https://img.engineeringhardware.com/Factory-Supply-Custom-Heavy-Duty-Plastic-Hose-Coupling-C-U-Clamp-Pipe-Fittings-Clip.webp)](https://engineeringhardware.com/product/factory-supply-custom-heavy-duty-plastic-hose-coupling-c-u-clamp-pipe-fittings-clip/)

Pipe, Tube, Beam & Cable Clamps

### [Factory Supply Custom Heavy Duty Plastic Hose Coupling C/U Clamp, Pipe Fittings Clip](https://engineeringhardware.com/product/factory-supply-custom-heavy-duty-plastic-hose-coupling-c-u-clamp-pipe-fittings-clip/)

Clamp,Rivet,Stud,Pin,Screw,Clip,Fitting,etc · 47

**US$0.012 – 0.12**MOQ 100 pieces

[![2024 Carbon Steel Manufacturers Heating M8 Pipe Clamps Without Rubber Heavy Duty M10 Pipe Hanger](https://img.engineeringhardware.com/2024-Carbon-Steel-Manufacturers-Heating-M8-Pipe-Clamps-Without-Rubber-Heavy-Duty-M10-Pipe-Hanger.webp)](https://engineeringhardware.com/product/2024-carbon-steel-manufacturers-heating-m8-pipe-clamps-without-rubber-heavy-duty-m10/)

Pipe, Tube, Beam & Cable Clamps

### [2024 Carbon Steel Manufacturers Heating M8 Pipe Clamps Without Rubber Heavy Duty M10 Pipe Hanger](https://engineeringhardware.com/product/2024-carbon-steel-manufacturers-heating-m8-pipe-clamps-without-rubber-heavy-duty-m10/)

Standard · Carbon Steel

**US$0.17 – 0.53**MOQ 2,000 pieces

[View all Pipe, Tube, Beam & Cable Clamps →](https://engineeringhardware.com/fastener-products/clamps-clips-cable-ties/pipe-tube-beam-cable-clamps/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Adjustable Swivel Ring Pipe Hangers for Your Application

- **Size:** Match the size to the mating part — see the dimension table below for each option.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (swivel ring hangers, MSS SP-58 type 10/11). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Where Adjustable Swivel Ring Pipe Hangers Are Not the Right Choice

Match the fastener to the load, environment and whether the joint must be reopened; the wrong class or style is the usual cause of joint failure.

Custom manufacturing · Made to drawing

## Need a adjustable swivel ring pipe hangers outside the standard range?

With no standard to depart from, the tolerance scheme is the specification — which dimensions are critical, and which are simply nominal. Made by milling or stamping.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom support & bracket manufacturing](https://engineeringhardware.com/custom/supports/)[Send a drawing](https://engineeringhardware.com/custom/supports/#rfq)

## Technical Drawing

Dimensioned line drawing of split ring, hinged Adjustable Swivel Ring Pipe Hangers to Trade series (swivel ring hangers, MSS SP-58 type 10/11). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Rod connection:** swivel nut
- **Installation:** closes around an installed pipe
- **Selected by:** pipe outside diameter and rod size

## Dimensions & Specifications (Trade series (swivel ring hangers, MSS SP-58 type 10/11))

| Ring form | Rod connection | Installation | Selected by |
| --- | --- | --- | --- |
| split ring, hinged | swivel nut | closes around an installed pipe | pipe outside diameter and rod size |
| split ring, bolted | swivel nut | closes around an installed pipe | pipe outside diameter and rod size |
| split ring with felt lining | swivel nut | closes around an installed pipe | pipe outside diameter, for noise isolation |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What are Adjustable Swivel Ring Pipe Hangers used for?

Carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. They are supplied to Trade series (swivel ring hangers, MSS SP-58 type 10/11).

### Which industries use Adjustable Swivel Ring Pipe Hangers?

They are commonly specified in general machine building, maintenance & repair (mro) and fabrication & metalwork, among other sectors.

### How do I choose the right size of Adjustable Swivel Ring Pipe Hangers?

Match the size to the mating part using the dimension table on this page.

### Are Adjustable Swivel Ring Pipe Hangers made to a recognized standard?

Yes — they are manufactured to Trade series (swivel ring hangers, MSS SP-58 type 10/11), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### Can I get a quote for Adjustable Swivel Ring Pipe Hangers in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Adjustable Swivel Ring Pipe Hangers — specifications & sizes](https://engineeringhardware.com/fastener/adjustable-swivel-ring-pipe-hangers/)

### Adjustable Swivel Ring Pipe Hangers Specification Guides

### Related Fastener Applications