---
title: "What Are Hex Bolt Used For?"
description: "Hex Bolts (GB/T 5783 / ISO 4017) are used for structural and machine joints that must be tightened to a controlled preload. Catalogued M3 to M36."
url: https://engineeringhardware.com/applications/cad-svg-010-hexbolt/
source: Engineering Hardware & Fasteners
---

# What Are Hex Bolt Used For?

Bolts · GB/T 5783 / ISO 4017 · Application guide

Typical applications, the industries that specify hex bolt, and how to choose the right size, material and finish for the joint.

Hex Bolts are used for structural and machine joints that must be tightened to a controlled preload. They are manufactured to GB/T 5783 / ISO 4017, and the choice of size, property class and finish is driven by the load in the joint and the environment it sits in.

- **Primary duty:** Structural and machine joints that must be tightened to a controlled preload
- **Governing standard:** GB/T 5783 / ISO 4017
- **Thread size range:** M3 to M36
- **Category:** Bolts

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Hex Bolt Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/06/Hex-Bolts-—-ISO-4014-／-ISO-4017-Applications1.webp)

Hex Bolts are used primarily for structural and machine joints that must be tightened to a controlled preload. This page lists the industries and assemblies where they are specified, the selection criteria that matter for each application, installation practice, and the cases where a different fastener type is the correct choice. Parts are supplied to GB/T 5783 / ISO 4017. Stocked across roughly M3 to M36, they cover general to heavy-duty work.

## Typical Applications for Hex Bolt — GB/T 5783 / ISO 4017 (Series 010)

The most common settings where these are specified:

- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.
- **Structural steel:** bolting beams, base plates and bracing where a defined preload and property class are required.
- **Automotive & transport:** chassis, suspension and powertrain mounting points subject to vibration.
- **Heavy machinery:** securing gearboxes, frames and guarding on plant that sees shock loads.

## How to Specify Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) for Your Application

- **Size:** Match the nominal size to the mating thread or hole. This product spans M3–M36; check the full table below for the exact dimensions of each size.
- **Strength class:** Choose the property class (e.g. 8.8, 10.9, 12.9 or A2/A4 stainless) for the load and environment, and tighten to the matching torque so the joint relies on preload, not friction.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to GB/T 5783 / ISO 4017. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Tighten to the torque for the size and property class with a calibrated wrench — the joint is held by preload, not by the thread friction alone.
- Ensure at least one full thread projects beyond the nut after tightening, and never re-use a bolt that has been tightened into yield.
- Under slotted or oversized holes, fit a hardened washer so the preload does not relax into the hole edge.

## Common Selection Mistakes with Hex Bolt — GB/T 5783 / ISO 4017 (Series 010)

- Specifying class 12.9 "to be safe" in a corrosive environment — high classes are more sensitive to hydrogen embrittlement and stress corrosion; 8.8 hot-dip galvanized often outlasts them outdoors.
- Choosing a length that puts the shear plane through the threaded portion when a plain shank (partially threaded bolt) was available.
- Mixing stainless bolts with plated-steel nuts: the joint loses its corrosion logic and can gall or seize.

## Where Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) Are Not the Right Choice

Not for permanent joints that will never be opened (a rivet or weld is cheaper), and not where the head must sit flush — use a countersunk screw instead.

Custom manufacturing · Made to drawing

## Need a hex bolt outside the standard range?

Where the standard stops, the drawing takes over: fine pitches, left-hand threads, partial threading, and property classes above the catalogued grade where material and heat treatment allow. Made by cold heading or hot forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom bolt manufacturing](https://engineeringhardware.com/custom/bolts/)[Send a drawing](https://engineeringhardware.com/custom/bolts/#rfq)

## Technical Drawing

Dimensioned line drawing of M3 Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) to GB/T 5783 / ISO 4017. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Pitch (mm):** 0.5
- **Nominal diameter d (mm):** 3
- **Length L (mm):** 20
- **Width across flats s (mm):** 5.5
- **Width across corners e (mm):** 6.01
- **Head height k (mm):** 2.0

## Dimensions & Specifications (GB/T 5783 / ISO 4017)

| Size | Pitch (mm) | Nominal diameter d (mm) | Length L (mm) | Width across flats s (mm) | Width across corners e (mm) | Head height k (mm) |
| --- | --- | --- | --- | --- | --- | --- |
| M3 | 0.5 | 3 | 20 | 5.5 | 6.01 | 2.0 |
| M4 | 0.7 | 4 | 25 | 7.0 | 7.66 | 2.8 |
| M5 | 0.8 | 5 | 30 | 8.0 | 8.79 | 3.5 |
| M6 | 1.0 | 6 | 40 | 10.0 | 11.05 | 4.0 |
| M8 | 1.25 | 8 | 50 | 13.0 | 14.38 | 5.3 |
| M10 | 1.5 | 10 | 60 | 16.0 | 17.77 | 6.4 |
| M12 | 1.75 | 12 | 80 | 18.0 | 20.03 | 7.5 |
| M14 | 2.0 | 14 | 80 | 21.0 | 23.36 | 8.8 |
| M16 | 2.0 | 16 | 100 | 24.0 | 26.75 | 10.0 |
| M18 | 2.5 | 18 | 100 | 27.0 | 30.14 | 11.5 |
| M20 | 2.5 | 20 | 120 | 30.0 | 33.53 | 12.5 |
| M24 | 3.0 | 24 | 150 | 36.0 | 39.98 | 15.0 |
| M30 | 3.5 | 30 | 180 | 46.0 | 50.85 | 18.7 |
| M36 | 4.0 | 36 | 200 | 55.0 | 60.79 | 22.5 |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What are Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) used for?

Structural and machine joints that must be tightened to a controlled preload. They are supplied to GB/T 5783 / ISO 4017.

### Which industries use Hex Bolt — GB/T 5783 / ISO 4017 (Series 010)?

They are commonly specified in fabrication & metalwork, structural steel and automotive & transport, among other sectors.

### How do I choose the right size of Hex Bolt — GB/T 5783 / ISO 4017 (Series 010)?

Match the nominal size to the mating thread or hole. This product is available from M3 to M36; the full dimension table on this page lists each size.

### How tight should Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) be torqued?

Tighten to the torque for the size and property class so the joint is held by bolt preload. The size pages and torque reference table give recommended values; use a calibrated torque wrench for anything structural.

### Can I get a quote for Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) — specifications & sizes](https://engineeringhardware.com/fastener/cad-svg-010-hexbolt/)

### Hex Bolt — GB/T 5783 / ISO 4017 (Series 010) Specification Guides

### Related Fastener Applications