---
title: "What Are Wing Nut Used For?"
description: "Wing Nuts (GB/T 62 / DIN 315) are used for assemblies that are adjusted or removed by hand, without tools. Catalogued M3 to M16."
url: https://engineeringhardware.com/applications/cad-svg-077-wingnut/
source: Engineering Hardware & Fasteners
---

# What Are Wing Nut Used For?

Nuts · GB/T 62 / DIN 315 · Application guide

Typical applications, the industries that specify wing nut, and how to choose the right size, material and finish for the joint.

Wing Nuts are used for assemblies that are adjusted or removed by hand, without tools. They are manufactured to GB/T 62 / DIN 315, and selection is driven by the thread size, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Assemblies that are adjusted or removed by hand, without tools
- **Governing standard:** GB/T 62 / DIN 315
- **Thread size range:** M3 to M16
- **Category:** Nuts

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Wing Nut Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/06/Hex-Nuts-—-ISO-4032-／-ISO-4033-Applications1.webp)

Wing Nuts are used primarily for assemblies that are adjusted or removed by hand, without tools. This page lists the industries and assemblies where they are specified, the selection criteria that matter for each application, installation practice, and the cases where a different fastener type is the correct choice. Parts are supplied to GB/T 62 / DIN 315. Stocked across roughly M3 to M16, they cover general to heavy-duty work.

## Typical Applications for Wing Nut — GB/T 62 / DIN 315 (Series 077)

The most common settings where these are specified:

- **Frames & weldments:** captive or welded options for repeatable assembly.
- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.
- **Bolted joints:** the clamping counter-face on studs and bolts across every assembly type.

## How to Specify Wing Nut — GB/T 62 / DIN 315 (Series 077) for Your Application

- **Size:** Match the nominal size to the mating thread or hole. This product spans M3–M16; check the full table below for the exact dimensions of each size.
- **Locking & grade:** Match the strength grade to the bolt, and choose a locking style (nyloc, all-metal, serrated flange) if the joint sees vibration.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to GB/T 62 / DIN 315. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Run the nut down by hand before applying the wrench to catch cross-threading early.
- Tighten the nut rather than the bolt head where access allows — the torque-to-preload relation is more consistent.
- For locking styles, note that nyloc inserts are single-use in critical joints and lose grip above roughly 120 °C.

## Common Selection Mistakes with Wing Nut — GB/T 62 / DIN 315 (Series 077)

- Pairing a high-class bolt with a lower-class nut — the nut strips before the bolt reaches proof load; the nut class must meet or exceed the bolt class.
- Using a plain nut with a spring washer in severe vibration instead of a prevailing-torque locking nut.
- Re-using nyloc nuts in critical joints.

## Where Wing Nut — GB/T 62 / DIN 315 (Series 077) Are Not the Right Choice

Not on their own — they need a matching bolt or stud — and a plain nut is not a substitute for a locking type under heavy vibration.

Custom manufacturing · Made to drawing

## Need a wing nut outside the standard range?

Dimensions, material, finish and form are specified from the drawing — a nut outside the standard range is a variation on existing tooling rather than a new design. Made by cold heading or tapping.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom nut manufacturing](https://engineeringhardware.com/custom/nuts/)[Send a drawing](https://engineeringhardware.com/custom/nuts/#rfq)

## Technical Drawing

Dimensioned line drawing of M3 Wing Nut — GB/T 62 / DIN 315 (Series 077) to GB/T 62 / DIN 315. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Pitch (mm):** 0.5
- **Wing width A (mm):** 12
- **Wing height h (mm):** 8
- **Nut height m (mm):** 5

## Dimensions & Specifications (GB/T 62 / DIN 315)

| Size | Pitch (mm) | Wing width A (mm) | Wing height h (mm) | Nut height m (mm) | Reference standard |
| --- | --- | --- | --- | --- | --- |
| M3 | 0.5 | 12 | 8 | 5 | GB/T 62 / DIN 315 |
| M4 | 0.7 | 16 | 10 | 7 | GB/T 62 / DIN 315 |
| M5 | 0.8 | 20 | 12 | 8 | GB/T 62 / DIN 315 |
| M6 | 1.0 | 24 | 14 | 10 | GB/T 62 / DIN 315 |
| M8 | 1.25 | 32 | 18 | 13 | GB/T 62 / DIN 315 |
| M10 | 1.5 | 40 | 22 | 16 | GB/T 62 / DIN 315 |
| M12 | 1.75 | 48 | 26 | 19 | GB/T 62 / DIN 315 |
| M16 | 2.0 | 60 | 32 | 24 | GB/T 62 / DIN 315 |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Are Wing Nut — GB/T 62 / DIN 315 (Series 077) made to a recognized standard?

Yes — they are manufactured to GB/T 62 / DIN 315, so dimensions are interchangeable between suppliers when you quote the standard on your order.

### What are Wing Nut — GB/T 62 / DIN 315 (Series 077) used for?

Assemblies that are adjusted or removed by hand, without tools. They are supplied to GB/T 62 / DIN 315.

### Which industries use Wing Nut — GB/T 62 / DIN 315 (Series 077)?

They are commonly specified in maintenance & repair (mro), fabrication & metalwork and bolted joints, among other sectors.

### How do I choose the right size of Wing Nut — GB/T 62 / DIN 315 (Series 077)?

Match the nominal size to the mating thread or hole. This product is available from M3 to M16; the full dimension table on this page lists each size.

### Can I get a quote for Wing Nut — GB/T 62 / DIN 315 (Series 077) in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Wing Nut — GB/T 62 / DIN 315 (Series 077) — specifications & sizes](https://engineeringhardware.com/fastener/cad-svg-077-wingnut/)

### Wing Nut — GB/T 62 / DIN 315 (Series 077) Specification Guides

### Related Fastener Applications