---
title: "What Are Confirmat Furniture Screws Used For?"
description: "Confirmat Furniture Screws (Trade series (confirmat furniture screws)) are used for joining particleboard or fiberboard with a pilot hole and a furniture scr…"
url: https://engineeringhardware.com/applications/confirmat-furniture-screws/
source: Engineering Hardware & Fasteners
---

# What Are Confirmat Furniture Screws Used For?

Screws · Trade series (confirmat furniture screws) · Application guide

Typical applications, the industries that specify confirmat furniture screws, and how to choose the right size, material and finish for the joint.

Confirmat Furniture Screws are used for joining particleboard or fiberboard with a pilot hole and a furniture screw selected for the board thickness. They are manufactured to Trade series (confirmat furniture screws), and the choice of size, property class and finish is driven by the load in the joint and the environment it sits in.

- **Primary duty:** Joining particleboard or fiberboard with a pilot hole and a furniture screw selected for the board thickness
- **Governing standard:** Trade series (confirmat furniture screws)
- **Nominal diameter range:** 5 mm to 7 mm
- **Category:** Screws

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Confirmat Furniture Screws Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Confirmat-Furniture-Screws.webp)

The primary duty of Confirmat Furniture Screws is joining particleboard or fiberboard with a pilot hole and a furniture screw selected for the board thickness. Below: the sectors that specify them in volume, the checklist used to select the right size and material for the application, installation notes, and the known limits of the type. Stocked across roughly 5 mm to 7 mm, they cover general to heavy-duty work.

## Typical Applications for Confirmat Furniture Screws

The most common settings where these are specified:

- **Particleboard furniture:** Confirmat screws clamp board joints with a large-diameter body.
- **Cabinet production:** Known pilot-hole sizes speed repeatable assembly.
- **Flat-pack manufacturing:** Hex or Pozidriv options suit production and field assembly.
- **Furniture repair:** 30–70 mm lengths cover common panel thickness combinations.

Product catalog

## Related Confirmat Furniture Screws products

[![Head Self-Drilling Wood Screws Corrosion-Resistant for Furniture, Decking, Cabinets & Outdoor Woodwork](https://img.engineeringhardware.com/Head-Self-Drilling-Wood-Screws-Corrosion-Resistant-for-Furniture-Decking-Cabinets-Outdoor-Woodwork.webp)](https://engineeringhardware.com/product/head-self-drilling-wood-screws-corrosion-resistant-for-furniture-decking-cabinets/)

Self-Drilling & Tek Screws

### [Head Self-Drilling Wood Screws Corrosion-Resistant for Furniture, Decking, Cabinets & Outdoor Woodwork](https://engineeringhardware.com/product/head-self-drilling-wood-screws-corrosion-resistant-for-furniture-decking-cabinets/)

Double Csk Head · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.012 – 0.0336**MOQ 10,000 pieces

[![Many Kinds Flange Head Self Drilling Screw Professional Exporter](https://img.engineeringhardware.com/Many-Kinds-Flange-Head-Self-Drilling-Screw-Professional-Exporter.webp)](https://engineeringhardware.com/product/many-kinds-flange-head-self-drilling-screw-professional-exporter/)

Self-Drilling & Tek Screws

### [Many Kinds Flange Head Self Drilling Screw Professional Exporter](https://engineeringhardware.com/product/many-kinds-flange-head-self-drilling-screw-professional-exporter/)

Hexagon Head · DIN, GB

**US$1,200**MOQ 2 tons

[![Zinc Plated Hex Head Self Drilling Screws Roof Screw Galvanized Metal Screws](https://img.engineeringhardware.com/Zinc-Plated-Hex-Head-Self-Drilling-Screws-Roof-Screw-Galvanized-Metal-Screws.webp)](https://engineeringhardware.com/product/zinc-plated-hex-head-self-drilling-screws-roof-screw-galvanized-metal-screws/)

Self-Drilling & Tek Screws

### [Zinc Plated Hex Head Self Drilling Screws Roof Screw Galvanized Metal Screws](https://engineeringhardware.com/product/zinc-plated-hex-head-self-drilling-screws-roof-screw-galvanized-metal-screws/)

DIN,DIN,JIS,ANSI,GB,BSW,etc · Shuangzi

**US$0.024 – 0.12**MOQ 1,000 pieces

[![C1022 Phil Drive Modify Truss Head Self Drilling Screw with Bsd#2 Drill Zinc Plated](https://img.engineeringhardware.com/C1022-Phil-Drive-Modify-Truss-Head-Self-Drilling-Screw-with-Bsd-2-Drill-Zinc-Plated.webp)](https://engineeringhardware.com/product/c1022-phil-drive-modify-truss-head-self-drilling-screw-with-bsd-2-drill-zinc-plated/)

Self-Drilling & Tek Screws

### [C1022 Phil Drive Modify Truss Head Self Drilling Screw with Bsd#2 Drill Zinc Plated](https://engineeringhardware.com/product/c1022-phil-drive-modify-truss-head-self-drilling-screw-with-bsd-2-drill-zinc-plated/)

C1022A · ISO

**US$0.12**MOQ 1,000 pieces

[![Heavy Duty #5 Point Self-Drilling Screws, Zinc-Tin Alloy Nano Coated Hex Head Fastener, Australian Standard Class 4 Roofing Screw](https://img.engineeringhardware.com/Heavy-Duty-5-Point-Self-Drilling-Screws-Zinc-Tin-Alloy-Nano-Coated-Hex-Head-Fastener-Australian-Standard-Class-4-Roofing-Screw.webp)](https://engineeringhardware.com/product/heavy-duty-5-point-self-drilling-screws-zinc-tin-alloy-nano-coated-hex-head-fastener/)

Self-Drilling & Tek Screws

### [Heavy Duty #5 Point Self-Drilling Screws, Zinc-Tin Alloy Nano Coated Hex Head Fastener, Australian Standard Class 4 Roofing Screw](https://engineeringhardware.com/product/heavy-duty-5-point-self-drilling-screws-zinc-tin-alloy-nano-coated-hex-head-fastener/)

Hexagon Head · DIN, GB, ANSI, BSW, JIS, GOST, As3566 Standard

**US$0.11 – 0.18**MOQ 10 pieces

[![High Grade New Design Metal Self-Drilling Roofing Screw](https://img.engineeringhardware.com/High-Grade-New-Design-Metal-Self-Drilling-Roofing-Screw.webp)](https://engineeringhardware.com/product/high-grade-new-design-metal-self-drilling-roofing-screw/)

Self-Drilling & Tek Screws

### [High Grade New Design Metal Self-Drilling Roofing Screw](https://engineeringhardware.com/product/high-grade-new-design-metal-self-drilling-roofing-screw/)

DIN, GB, ANSI, BSW, JIS, GOST · Carbon Steel

**US$0.12**MOQ 100,000 pieces

[View all Self-Drilling & Tek Screws →](https://engineeringhardware.com/fastener-products/screws/self-drilling-tek-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Confirmat Furniture Screws for Your Application

- **Size:** Match the nominal size to the mating thread or hole. This product spans 5 mm–7 mm; check the full table below for the exact dimensions of each size.
- **Drive & head:** Pick the drive (socket, cross, slot) and head style for the tool access and seating surface; a recessed drive resists cam-out under power tools.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (confirmat furniture screws). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Match the driver exactly to the recess (PH ≠ PZ; hex key sizes per ISO 2936) and keep the tool axial — side load is the main cause of stripped drives.
- In tapped holes, engage a thread length of at least 1× the nominal diameter in steel, 2× in aluminum.
- Set power tools to a torque that seats the head without embedding it into the mating surface.

## Common Selection Mistakes with Confirmat Furniture Screws

- Under-sizing the drive for the installation torque — a small recess at high torque strips before the screw is seated.
- Using a countersunk head in thin sheet where the countersink removes most of the load-bearing material.
- Specifying stainless in high-strength duty: A2-70 is roughly class 7 steel, not a 10.9 substitute.

## Where Confirmat Furniture Screws Are Not the Right Choice

Not for high-preload structural joints (use a property-class bolt and nut), and not in thin sheet where a self-drilling or self-tapping type suits better.

Custom manufacturing · Made to drawing

## Need a confirmat furniture screws outside the standard range?

Thread size and pitch, length, property class, drive form, head geometry and head marking are all specifiable — the standard part is where it starts, not where it stops. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of 5 Confirmat Furniture Screws to Trade series (confirmat furniture screws). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Pilot hole (mm):** 4
- **Length options (mm):** 40 / 50
- **Drive:** 3 mm hex
- **Finish options:** zinc-plated steel

## Dimensions & Specifications (Trade series (confirmat furniture screws))

| Screw diameter (mm) | Pilot hole (mm) | Length options (mm) | Drive | Finish options |
| --- | --- | --- | --- | --- |
| 5 | 4 | 40 / 50 | 3 mm hex | zinc-plated steel |
| 7 | 5 | 30 / 40 / 50 / 60 / 70 | 4 mm hex | zinc-plated steel; yellow-zinc / black-zinc / Pozidriv variants |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What material should Confirmat Furniture Screws be for outdoor use?

For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate.

### Are Confirmat Furniture Screws made to a recognized standard?

Yes — they are manufactured to Trade series (confirmat furniture screws), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### What are Confirmat Furniture Screws used for?

Joining particleboard or fiberboard with a pilot hole and a furniture screw selected for the board thickness. They are supplied to Trade series (confirmat furniture screws).

### Which industries use Confirmat Furniture Screws?

They are commonly specified in particleboard furniture, cabinet production and flat-pack manufacturing, among other sectors.

### Can I get a quote for Confirmat Furniture Screws in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Confirmat Furniture Screws — specifications & sizes](https://engineeringhardware.com/fastener/confirmat-furniture-screws/)

### Confirmat Furniture Screws Specification Guides

### Related Fastener Applications
