---
title: "What Are Drive-In Metal Hollow Wall Anchors Used For?"
description: "Drive-In Metal Hollow Wall Anchors (Trade series (drive-in hollow wall anchors)) are used for fixing steelwork, plant and services to concrete and masonry, w…"
url: https://engineeringhardware.com/applications/drive-in-metal-hollow-wall-anchors/
source: Engineering Hardware & Fasteners
---

# What Are Drive-In Metal Hollow Wall Anchors Used For?

Anchors & Concrete Fixings · Trade series (drive-in hollow wall anchors) · Application guide

Typical applications, the industries that specify drive-in metal hollow wall anchors, and how to choose the right size, material and finish for the joint.

Drive-In Metal Hollow Wall Anchors are used for fixing steelwork, plant and services to concrete and masonry, where the anchor is set in a drilled hole and its capacity is governed by the base material rather than by the steel. They are manufactured to Trade series (drive-in hollow wall anchors), and selection is driven by the nominal diameter, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Fixing steelwork, plant and services to concrete and masonry, where the anchor is set in a drilled hole and its capacity is governed by the base material rather than by the steel
- **Governing standard:** Trade series (drive-in hollow wall anchors)
- **Category:** Anchors & Concrete Fixings

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Drive-In Metal Hollow Wall Anchors Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Drive-In-Metal-Hollow-Wall-Anchors.webp)

Drive-In Metal Hollow Wall Anchors are used primarily for fixing steelwork, plant and services to concrete and masonry, where the anchor is set in a drilled hole and its capacity is governed by the base material rather than by the steel. This page lists the industries and assemblies where they are specified, the selection criteria that matter for each application, installation practice, and the cases where a different fastener type is the correct choice. Parts are supplied to Trade series (drive-in hollow wall anchors).

## Typical Applications for Drive-In Metal Hollow Wall Anchors

The most common settings where these are specified:

- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.
- **Structural fixing to concrete:** base plates, brackets, rails and steelwork bolted to a concrete slab or wall.
- **Building services:** suspending cable tray, ductwork, sprinkler pipe and unistrut from a soffit.
- **Plant & machine installation:** holding down machines, presses and conveyors on a factory floor.

Product catalog

## Related Drywall Anchors products

[![Custom Drywall Anchors Fastener Zinc Alloy Easy Drive Anchor Self Tapping Metal Gypsum Plasterboard Fixing Screw with Pan Head Gkm](https://img.engineeringhardware.com/Custom-Drywall-Anchors-Fastener-Zinc-Alloy-Easy-Drive-Anchor-Self-Tapping-Metal-Gypsum-Plasterboard-Fixing-Screw-with-Pan-Head-Gkm.webp)](https://engineeringhardware.com/product/custom-drywall-anchors-fastener-zinc-alloy-easy-drive-anchor-self-tapping-metal/)

Nylon, Plastic & Drywall Anchors

### [Custom Drywall Anchors Fastener Zinc Alloy Easy Drive Anchor Self Tapping Metal Gypsum Plasterboard Fixing Screw with Pan Head Gkm](https://engineeringhardware.com/product/custom-drywall-anchors-fastener-zinc-alloy-easy-drive-anchor-self-tapping-metal/)

Stainless Steel · ISO, RoHS

**US$0.24 – 0.83**MOQ 2,000 pieces

[![Wall Plug Anchor Aluminum Heat Preservation Dowel Nail Insulation Nail](https://img.engineeringhardware.com/Wall-Plug-Anchor-Aluminum-Heat-Preservation-Dowel-Nail-Insulation-Nail-2.webp)](https://engineeringhardware.com/product/wall-plug-anchor-aluminum-heat-preservation-dowel-nail-insulation-nail-2/)

Nylon, Plastic & Drywall Anchors

### [Wall Plug Anchor Aluminum Heat Preservation Dowel Nail Insulation Nail](https://engineeringhardware.com/product/wall-plug-anchor-aluminum-heat-preservation-dowel-nail-insulation-nail-2/)

Furniture, Electronic, Hardware · Compound Die

**US$0.024 – 0.048**MOQ 5,000 pieces

[![Gray Nylon Expansion Tube for Concrete Brick and Solid Wall with M8 M10 M12 Wall Plug](https://img.engineeringhardware.com/Gray-Nylon-Expansion-Tube-for-Concrete-Brick-and-Solid-Wall-with-M8-M10-M12-Wall-Plug.webp)](https://engineeringhardware.com/product/gray-nylon-expansion-tube-for-concrete-brick-and-solid-wall-with-m8-m10-m12-wall-plug/)

Nylon, Plastic & Drywall Anchors

### [Gray Nylon Expansion Tube for Concrete Brick and Solid Wall with M8 M10 M12 Wall Plug](https://engineeringhardware.com/product/gray-nylon-expansion-tube-for-concrete-brick-and-solid-wall-with-m8-m10-m12-wall-plug/)

Round Head · GB

**US$0.0043 – 0.0072**MOQ 1,000 pieces

[![Yellow Plastic Wall Plug for Screw](https://img.engineeringhardware.com/Yellow-Plastic-Wall-Plug-for-Screw.webp)](https://engineeringhardware.com/product/yellow-plastic-wall-plug-for-screw/)

Nylon, Plastic & Drywall Anchors

### [Yellow Plastic Wall Plug for Screw](https://engineeringhardware.com/product/yellow-plastic-wall-plug-for-screw/)

Fish Type Plastic Wall Anchor · PE Plastic

**US$0.0012 – 0.12**MOQ 1 piece

[![Nail-in Anchors Plastic Expansion Anchor Bolt Nylon Frame Fixing Wall Screws](https://img.engineeringhardware.com/Nail-in-Anchors-Plastic-Expansion-Anchor-Bolt-Nylon-Frame-Fixing-Wall-Screws.webp)](https://engineeringhardware.com/product/nail-in-anchors-plastic-expansion-anchor-bolt-nylon-frame-fixing-wall-screws/)

Nylon, Plastic & Drywall Anchors

### [Nail-in Anchors Plastic Expansion Anchor Bolt Nylon Frame Fixing Wall Screws](https://engineeringhardware.com/product/nail-in-anchors-plastic-expansion-anchor-bolt-nylon-frame-fixing-wall-screws/)

Plastic Expansion Anchor Bolt · GB, ASTM, DIN, JIS, AISI, BS

**US$0.14 – 0.30**MOQ 1 piece

[![Hot Selling Plastic Concrete Expansion Anchors Bolt with Drywall Screws Wall Plug](https://img.engineeringhardware.com/Hot-Selling-Plastic-Concrete-Expansion-Anchors-Bolt-with-Drywall-Screws-Wall-Plug.webp)](https://engineeringhardware.com/product/hot-selling-plastic-concrete-expansion-anchors-bolt-with-drywall-screws-wall-plug/)

Nylon, Plastic & Drywall Anchors

### [Hot Selling Plastic Concrete Expansion Anchors Bolt with Drywall Screws Wall Plug](https://engineeringhardware.com/product/hot-selling-plastic-concrete-expansion-anchors-bolt-with-drywall-screws-wall-plug/)

ANSI, BSW, DIN, GB · Carbon Steel

**US$0.072 – 2.40**MOQ 10 pieces

[View all Nylon, Plastic & Drywall Anchors →](https://engineeringhardware.com/fastener-products/anchors-construction-fixings/nylon-plastic-drywall-anchors/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Drive-In Metal Hollow Wall Anchors for Your Application

- **Size:** Match the size to the mating part — see the dimension table below for each option.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (drive-in hollow wall anchors). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Where Drive-In Metal Hollow Wall Anchors Are Not the Right Choice

Match the fastener to the load, environment and whether the joint must be reopened; the wrong class or style is the usual cause of joint failure.

Custom manufacturing · Made to drawing

## Need a drive-in metal hollow wall anchors outside the standard range?

Embedment depth, thread size, body length and corrosion protection are the variables; capacity remains a concrete design value, not a property of the anchor alone. Made by hot forging or thread rolling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom anchor & concrete fixing manufacturing](https://engineeringhardware.com/custom/anchors/)[Send a drawing](https://engineeringhardware.com/custom/anchors/#rfq)

## Technical Drawing

Dimensioned line drawing of hammer through the board Drive-In Metal Hollow Wall Anchors to Trade series (drive-in hollow wall anchors). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Head style:** flanged
- **Mating screw:** matched machine screw
- **Substrate:** plasterboard and hollow panel
- **Finish:** zinc plated

## Dimensions & Specifications (Trade series (drive-in hollow wall anchors))

| Installation | Head style | Mating screw | Substrate | Finish |
| --- | --- | --- | --- | --- |
| hammer through the board | flanged | matched machine screw | plasterboard and hollow panel | zinc plated |
| hammer through the board | countersunk | matched machine screw | plasterboard and hollow panel | zinc plated |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What are Drive-In Metal Hollow Wall Anchors used for?

Fixing steelwork, plant and services to concrete and masonry, where the anchor is set in a drilled hole and its capacity is governed by the base material rather than by the steel. They are supplied to Trade series (drive-in hollow wall anchors).

### Which industries use Drive-In Metal Hollow Wall Anchors?

They are commonly specified in building services, plant & machine installation and fit-out & drylining, among other sectors.

### How do I choose the right size of Drive-In Metal Hollow Wall Anchors?

Match the size to the mating part using the dimension table on this page.

### What material should Drive-In Metal Hollow Wall Anchors be for outdoor use?

For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate.

### Can I get a quote for Drive-In Metal Hollow Wall Anchors in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Drive-In Metal Hollow Wall Anchors — specifications & sizes](https://engineeringhardware.com/fastener/drive-in-metal-hollow-wall-anchors/)

### Drive-In Metal Hollow Wall Anchors Specification Guides

### Related Fastener Applications
