---
title: "What Are Embedded Anchor Bolts (GB/T 799 / DIN 529) Used For?"
description: "Embedded Anchor Bolts (GB/T 799 / DIN 529) (GB/T 799-2020 / DIN 529) are used for structural and machine joints that must be tightened to a controlled preloa…"
url: https://engineeringhardware.com/applications/embedded-anchor-bolts-gb-t-799-din-529/
source: Engineering Hardware & Fasteners
---

# What Are Embedded Anchor Bolts (GB/T 799 / DIN 529) Used For?

Bolts · GB/T 799-2020 / DIN 529 · Application guide

Typical applications, the industries that specify embedded anchor bolts (gb/t 799 / din 529), and how to choose the right size, material and finish for the joint.

Embedded Anchor Bolts (GB/T 799 / DIN 529) are used for structural and machine joints that must be tightened to a controlled preload. They are manufactured to GB/T 799-2020 / DIN 529, and the choice of size, property class and finish is driven by the load in the joint and the environment it sits in.

- **Primary duty:** Structural and machine joints that must be tightened to a controlled preload
- **Governing standard:** GB/T 799-2020 / DIN 529
- **Category:** Bolts

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Embedded Anchor Bolts (GB/T 799 / DIN 529) Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Anchor-Bolts-GB-T-799-DIN-529.webp)

Application guide for Embedded Anchor Bolts (GB/T 799 / DIN 529) to GB/T 799-2020 / DIN 529. The core duty of the type is structural and machine joints that must be tightened to a controlled preload. The typical industries, the how-to-specify checklist, assembly practice and the exclusion cases are set out below.

## Typical Applications for Embedded Anchor Bolts (GB/T 799 / DIN 529)

The most common settings where these are specified:

- **Automotive & transport:** chassis, suspension and powertrain mounting points subject to vibration.
- **Heavy machinery:** securing gearboxes, frames and guarding on plant that sees shock loads.
- **Energy & infrastructure:** tower, pylon and pipework supports exposed to weather and long service life.
- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.

Product catalog

## Related Embedded Anchor Bolts products

[![OEM CNC Machined Hardware Fasteners China Bolzen Anchor Bolt Nut Washer O Ring Mechanical Seal for Machinery Equipment](https://img.engineeringhardware.com/OEM-CNC-Machined-Hardware-Fasteners-China-Bolzen-Anchor-Bolt-Nut-Washer-O-Ring-Mechanical-Seal-for-Machinery-Equipment.webp)](https://engineeringhardware.com/product/oem-cnc-machined-hardware-fasteners-china-bolzen-anchor-bolt-nut-washer-o-ring/)

Foundation & Anchor Bolts

### [OEM CNC Machined Hardware Fasteners China Bolzen Anchor Bolt Nut Washer O Ring Mechanical Seal for Machinery Equipment](https://engineeringhardware.com/product/oem-cnc-machined-hardware-fasteners-china-bolzen-anchor-bolt-nut-washer-o-ring/)

DIN, ASTM, GOST, GB, JIS, ANSI · Metal

**US$0.60 – 12.00**MOQ 10 pieces

[![Electric Galvanized/Hot Galvanizing J Bolts / Open Eye Bolt/Custom Bent/ Ground Bolt/ 9 Foundation Bolt & Nuts/Special Foundation Bolt/304 L-Bolt](https://img.engineeringhardware.com/Electric-Galvanized-Hot-Galvanizing-J-Bolts-Open-Eye-Bolt-Custom-Bent-Ground-Bolt-9-Foundation-Bolt-Nuts-Special-Foundation-Bolt-304-L-Bolt.webp)](https://engineeringhardware.com/product/electric-galvanized-hot-galvanizing-j-bolts-open-eye-bolt-custom-bent-ground-bolt-9/)

Foundation & Anchor Bolts

### [Electric Galvanized/Hot Galvanizing J Bolts / Open Eye Bolt/Custom Bent/ Ground Bolt/ 9 Foundation Bolt & Nuts/Special Foundation Bolt/304 L-Bolt](https://engineeringhardware.com/product/electric-galvanized-hot-galvanizing-j-bolts-open-eye-bolt-custom-bent-ground-bolt-9/)

4.8 / 8.8 /10.9/12.9 · Black, Electric Galvanizing, Hot DIP Galvanizin…

**US$0.60 – 6.00**MOQ 100 pieces

[![Factory Manufacturer J L I Shape ASTM F1554 Gr. 36 55 105 S Foundation Anchor Bolts](https://img.engineeringhardware.com/Factory-Manufacturer-J-L-I-Shape-ASTM-F1554-Gr-36-55-105-S-Foundation-Anchor-Bolts.webp)](https://engineeringhardware.com/product/factory-manufacturer-j-l-i-shape-astm-f1554-gr-36-55-105-s-foundation-anchor-bolts/)

Foundation & Anchor Bolts

### [Factory Manufacturer J L I Shape ASTM F1554 Gr. 36 55 105 S Foundation Anchor Bolts](https://engineeringhardware.com/product/factory-manufacturer-j-l-i-shape-astm-f1554-gr-36-55-105-s-foundation-anchor-bolts/)

DIN & ANSI & JIS & IFI&ASTM · Carbon Steel

**US$0.012 – 0.024**MOQ 10,000 pieces

[![Heavy-Duty Galvanized J Type Anchor Bolts for Construction, Zinc Plated Carbon Steel L Bolts with Washers and Nuts, Foundation Bolts](https://img.engineeringhardware.com/Heavy-Duty-Galvanized-J-Type-Anchor-Bolts-for-Construction-Zinc-Plated-Carbon-Steel-L-Bolts-with-Washers-and-Nuts-Foundation-Bolts.webp)](https://engineeringhardware.com/product/heavy-duty-galvanized-j-type-anchor-bolts-for-construction-zinc-plated-carbon-steel/)

Foundation & Anchor Bolts

### [Heavy-Duty Galvanized J Type Anchor Bolts for Construction, Zinc Plated Carbon Steel L Bolts with Washers and Nuts, Foundation Bolts](https://engineeringhardware.com/product/heavy-duty-galvanized-j-type-anchor-bolts-for-construction-zinc-plated-carbon-steel/)

L Type/J Type · ANSI, BSW, DIN, GB, GOST, JIS

**US$0.12**MOQ 1 piece

[![Glass Fiber Reinferced Fiberglass Rockbolt FRP Rock Anchor Bolt for Structure Gfrp Rock Bolt](https://img.engineeringhardware.com/Glass-Fiber-Reinferced-Fiberglass-Rockbolt-FRP-Rock-Anchor-Bolt-for-Structure-Gfrp-Rock-Bolt.webp)](https://engineeringhardware.com/product/glass-fiber-reinferced-fiberglass-rockbolt-frp-rock-anchor-bolt-for-structure-gfrp/)

Foundation & Anchor Bolts

### [Glass Fiber Reinferced Fiberglass Rockbolt FRP Rock Anchor Bolt for Structure Gfrp Rock Bolt](https://engineeringhardware.com/product/glass-fiber-reinferced-fiberglass-rockbolt-frp-rock-anchor-bolt-for-structure-gfrp/)

High Tensile Strength · 1/4in, 5/16in

**US$0.60 – 6.96**MOQ 100 meters

[![Customizable Car Repair Gecko Anchor Bolt M6-M24 Carbon Steel Galvanized for Equipment Fixing](https://img.engineeringhardware.com/Customizable-Car-Repair-Gecko-Anchor-Bolt-M6-M24-Carbon-Steel-Galvanized-for-Equipment-Fixing.webp)](https://engineeringhardware.com/product/customizable-car-repair-gecko-anchor-bolt-m6-m24-carbon-steel-galvanized-for/)

Foundation & Anchor Bolts

### [Customizable Car Repair Gecko Anchor Bolt M6-M24 Carbon Steel Galvanized for Equipment Fixing](https://engineeringhardware.com/product/customizable-car-repair-gecko-anchor-bolt-m6-m24-carbon-steel-galvanized-for/)

Stainless Steel · ISO, GS, RoHS, CE

**US$0.0018 – 0.0024**MOQ 1,000 pieces

[View all Foundation & Anchor Bolts →](https://engineeringhardware.com/fastener-products/anchors-construction-fixings/foundation-anchor-bolts/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Embedded Anchor Bolts (GB/T 799 / DIN 529) for Your Application

- **Size:** Match the size to the mating part — see the dimension table below for each option.
- **Strength class:** Choose the property class (e.g. 8.8, 10.9, 12.9 or A2/A4 stainless) for the load and environment, and tighten to the matching torque so the joint relies on preload, not friction.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to GB/T 799-2020 / DIN 529. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Tighten to the torque for the size and property class with a calibrated wrench — the joint is held by preload, not by the thread friction alone.
- Ensure at least one full thread projects beyond the nut after tightening, and never re-use a bolt that has been tightened into yield.
- Under slotted or oversized holes, fit a hardened washer so the preload does not relax into the hole edge.

## Common Selection Mistakes with Embedded Anchor Bolts (GB/T 799 / DIN 529)

- Specifying class 12.9 "to be safe" in a corrosive environment — high classes are more sensitive to hydrogen embrittlement and stress corrosion; 8.8 hot-dip galvanized often outlasts them outdoors.
- Choosing a length that puts the shear plane through the threaded portion when a plain shank (partially threaded bolt) was available.
- Mixing stainless bolts with plated-steel nuts: the joint loses its corrosion logic and can gall or seize.

## Where Embedded Anchor Bolts (GB/T 799 / DIN 529) Are Not the Right Choice

Not for permanent joints that will never be opened (a rivet or weld is cheaper), and not where the head must sit flush — use a countersunk screw instead.

Custom manufacturing · Made to drawing

## Need a embedded anchor bolts (GB/T 799 / DIN 529) outside the standard range?

Lengths and thread lengths outside the standard table are the commonest request, followed by a drive the standard does not offer and a head marked with your own part number. Made by cold heading or hot forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom bolt manufacturing](https://engineeringhardware.com/custom/bolts/)[Send a drawing](https://engineeringhardware.com/custom/bolts/#rfq)

## Technical Drawing

Dimensioned line drawing of hook (L or J) anchor Embedded Anchor Bolts (GB/T 799 / DIN 529) to GB/T 799-2020 / DIN 529. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Material:** carbon steel
- **Finish options:** black oxide / blue-white zinc / yellow zinc / hot-dip galvanized
- **Typical installation:** machine bases and lamp poles

## Dimensions & Specifications (GB/T 799-2020 / DIN 529)

| Anchor form | Material | Finish options | Typical installation |
| --- | --- | --- | --- |
| hook (L or J) anchor | carbon steel | black oxide / blue-white zinc / yellow zinc / hot-dip galvanized | machine bases and lamp poles |
| hook (L or J) anchor | A2 or A4 stainless steel | passivated | exposed and corrosive installations |
| plate anchor | carbon steel | black oxide / hot-dip galvanized | steel structures and transformer bases |
| plate anchor | A2 or A4 stainless steel | passivated | pressure-vessel installations |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What are Embedded Anchor Bolts (GB/T 799 / DIN 529) used for?

Structural and machine joints that must be tightened to a controlled preload. They are supplied to GB/T 799-2020 / DIN 529.

### Which industries use Embedded Anchor Bolts (GB/T 799 / DIN 529)?

They are commonly specified in heavy machinery, energy & infrastructure and general machine building, among other sectors.

### How do I choose the right size of Embedded Anchor Bolts (GB/T 799 / DIN 529)?

Match the size to the mating part using the dimension table on this page.

### How tight should Embedded Anchor Bolts (GB/T 799 / DIN 529) be torqued?

Tighten to the torque for the size and property class so the joint is held by bolt preload. The size pages and torque reference table give recommended values; use a calibrated torque wrench for anything structural.

### Can I get a quote for Embedded Anchor Bolts (GB/T 799 / DIN 529) in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Embedded Anchor Bolts (GB/T 799 / DIN 529) — specifications & sizes](https://engineeringhardware.com/fastener/embedded-anchor-bolts-gb-t-799-din-529/)

### Embedded Anchor Bolts (GB/T 799 / DIN 529) Specification Guides

### Related Fastener Applications
