---
title: "What Are Expansion Blind Fasteners for Hollow Section Used For?"
description: "Expansion Blind Fasteners for Hollow Sections (Trade series (expansion blind fasteners)) are used for structural and machine joints that must be tightened to…"
url: https://engineeringhardware.com/applications/expansion-blind-fasteners-for-hollow-section/
source: Engineering Hardware & Fasteners
---

# What Are Expansion Blind Fasteners for Hollow Section Used For?

Bolts · Trade series (expansion blind fasteners) · Application guide

Typical applications, the industries that specify expansion blind fasteners for hollow section, and how to choose the right size, material and finish for the joint.

Expansion Blind Fasteners for Hollow Sections are used for structural and machine joints that must be tightened to a controlled preload. They are manufactured to Trade series (expansion blind fasteners), and the choice of size, property class and finish is driven by the load in the joint and the environment it sits in.

- **Primary duty:** Structural and machine joints that must be tightened to a controlled preload
- **Governing standard:** Trade series (expansion blind fasteners)
- **Category:** Bolts

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Expansion Blind Fasteners for Hollow Section Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Lindapter-Hollo-Bolt-Expansion-Blind-Fasteners.webp)

Expansion Blind Fasteners for Hollow Sections are selected when an assembly calls for structural and machine joints that must be tightened to a controlled preload. This application guide to the Trade series (expansion blind fasteners) type covers concrete end-uses, the specification checklist, correct installation, and where an alternative fastener performs better.

## Typical Applications for Expansion Blind Fasteners for Hollow Section

The most common settings where these are specified:

- **Automotive & transport:** chassis, suspension and powertrain mounting points subject to vibration.
- **Heavy machinery:** securing gearboxes, frames and guarding on plant that sees shock loads.
- **Energy & infrastructure:** tower, pylon and pipework supports exposed to weather and long service life.
- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.

Product catalog

## Related Structural Blind Bolts products

[![Galvanized Grade 10.9 A325 A325m Hex Structural ASTM A490 A490m Dacromet Heavy Hex Bolt](https://img.engineeringhardware.com/Galvanized-Grade-10-9-A325-A325m-Hex-Structural-ASTM-A490-A490m-Dacromet-Heavy-Hex-Bolt.webp)](https://engineeringhardware.com/product/galvanized-grade-10-9-a325-a325m-hex-structural-astm-a490-a490m-dacromet-heavy-hex/)

Structural & Heavy Hex Bolts

### [Galvanized Grade 10.9 A325 A325m Hex Structural ASTM A490 A490m Dacromet Heavy Hex Bolt](https://engineeringhardware.com/product/galvanized-grade-10-9-a325-a325m-hex-structural-astm-a490-a490m-dacromet-heavy-hex/)

Hexagon Head · DIN, ANSI, GB, JIS, BSW, GOST

**US$0.012 – 0.06**MOQ 1,000 pieces

[![ASTM A490/A325/F3125 Type-1 Heavy Hex Structural Bolts, Hexagon Structure Bolts M12-M36, High Strength Carbon Steel Bolts](https://img.engineeringhardware.com/ASTM-A490-A325-F3125-Type-1-Heavy-Hex-Structural-Bolts-Hexagon-Structure-Bolts-M12-M36-High-Strength-Carbon-Steel-Bolts.webp)](https://engineeringhardware.com/product/astm-a490-a325-f3125-type-1-heavy-hex-structural-bolts-hexagon-structure-bolts-m12/)

Structural & Heavy Hex Bolts

### [ASTM A490/A325/F3125 Type-1 Heavy Hex Structural Bolts, Hexagon Structure Bolts M12-M36, High Strength Carbon Steel Bolts](https://engineeringhardware.com/product/astm-a490-a325-f3125-type-1-heavy-hex-structural-bolts-hexagon-structure-bolts-m12/)

Hexagon Head · DIN, ANSI, GB, JIS, BSW

**US$0.12**MOQ 1 piece

[![New ASTM A325 Structural Bolt Hex Head Bolt](https://img.engineeringhardware.com/New-ASTM-A325-Structural-Bolt-Hex-Head-Bolt.webp)](https://engineeringhardware.com/product/new-astm-a325-structural-bolt-hex-head-bolt/)

Structural & Heavy Hex Bolts

### [New ASTM A325 Structural Bolt Hex Head Bolt](https://engineeringhardware.com/product/new-astm-a325-structural-bolt-hex-head-bolt/)

Hexagon Head · DIN, ANSI, GB, JIS, A325, A325

**US$0.36**MOQ 1,000 pieces

[![DIN933/GB5782 High-Strength Steel Hexagon Head Bolt with Nut](https://img.engineeringhardware.com/DIN933-GB5782-High-Strength-Steel-Hexagon-Head-Bolt-with-Nut.webp)](https://engineeringhardware.com/product/din933-gb5782-high-strength-steel-hexagon-head-bolt-with-nut/)

Structural & Heavy Hex Bolts

### [DIN933/GB5782 High-Strength Steel Hexagon Head Bolt with Nut](https://engineeringhardware.com/product/din933-gb5782-high-strength-steel-hexagon-head-bolt-with-nut/)

Hexagon Head · DIN, ANSI, GB, BSW

**US$0.06 – 0.30**MOQ 10,000 pieces

[![High Strength OEM/ODM Fastener DIN933/931 Hex Head Bolt for Automotive with Black Oxide Alloy Steel Tensile Double Sided End Threaded Bolt](https://img.engineeringhardware.com/High-Strength-OEM-ODM-Fastener-DIN933-931-Hex-Head-Bolt-for-Automotive-with-Black-Oxide-Alloy-Steel-Tensile-Double-Sided-End-Threaded-Bolt.webp)](https://engineeringhardware.com/product/high-strength-oem-odm-fastener-din933-931-hex-head-bolt-for-automotive-with-black/)

Structural & Heavy Hex Bolts

### [High Strength OEM/ODM Fastener DIN933/931 Hex Head Bolt for Automotive with Black Oxide Alloy Steel Tensile Double Sided End Threaded Bolt](https://engineeringhardware.com/product/high-strength-oem-odm-fastener-din933-931-hex-head-bolt-for-automotive-with-black/)

Hexagon Head · DIN, GB, ISO

**US$0.0144 – 0.12**MOQ 1,000 pieces

[![High Strength Steel Round Head Jssii09 Tc Tor Shear Torque S10t Bolt](https://img.engineeringhardware.com/High-Strength-Steel-Round-Head-Jssii09-Tc-Tor-Shear-Torque-S10t-Bolt.webp)](https://engineeringhardware.com/product/high-strength-steel-round-head-jssii09-tc-tor-shear-torque-s10t-bolt/)

Structural & Heavy Hex Bolts

### [High Strength Steel Round Head Jssii09 Tc Tor Shear Torque S10t Bolt](https://engineeringhardware.com/product/high-strength-steel-round-head-jssii09-tc-tor-shear-torque-s10t-bolt/)

Round Head · DIN, ANSI

**US$0.24 – 2.40**MOQ 1,000 sets

[View all Structural & Heavy Hex Bolts →](https://engineeringhardware.com/fastener-products/bolts/structural-heavy-hex-bolts/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Expansion Blind Fasteners for Hollow Section for Your Application

- **Size:** Match the size to the mating part — see the dimension table below for each option.
- **Strength class:** Choose the property class (e.g. 8.8, 10.9, 12.9 or A2/A4 stainless) for the load and environment, and tighten to the matching torque so the joint relies on preload, not friction.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (expansion blind fasteners). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Tighten to the torque for the size and property class with a calibrated wrench — the joint is held by preload, not by the thread friction alone.
- Ensure at least one full thread projects beyond the nut after tightening, and never re-use a bolt that has been tightened into yield.
- Under slotted or oversized holes, fit a hardened washer so the preload does not relax into the hole edge.

## Common Selection Mistakes with Expansion Blind Fasteners for Hollow Section

- Specifying class 12.9 "to be safe" in a corrosive environment — high classes are more sensitive to hydrogen embrittlement and stress corrosion; 8.8 hot-dip galvanized often outlasts them outdoors.
- Choosing a length that puts the shear plane through the threaded portion when a plain shank (partially threaded bolt) was available.
- Mixing stainless bolts with plated-steel nuts: the joint loses its corrosion logic and can gall or seize.

## Where Expansion Blind Fasteners for Hollow Section Are Not the Right Choice

Not for permanent joints that will never be opened (a rivet or weld is cheaper), and not where the head must sit flush — use a countersunk screw instead.

Custom manufacturing · Made to drawing

## Need a expansion blind fasteners for hollow section outside the standard range?

Where the standard stops, the drawing takes over: fine pitches, left-hand threads, partial threading, and property classes above the catalogued grade where material and heat treatment allow. Made by cold heading or hot forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom bolt manufacturing](https://engineeringhardware.com/custom/bolts/)[Send a drawing](https://engineeringhardware.com/custom/bolts/#rfq)

## Technical Drawing

Dimensioned line drawing of one side only Expansion Blind Fasteners for Hollow Section to Trade series (expansion blind fasteners). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Mechanism:** sleeve flares behind the far wall
- **Governed by:** hole diameter and grip range
- **Capacity basis:** manufacturer test data

## Dimensions & Specifications (Trade series (expansion blind fasteners))

| Installation access | Mechanism | Governed by | Capacity basis |
| --- | --- | --- | --- |
| one side only | sleeve flares behind the far wall | hole diameter and grip range | manufacturer test data |
| one side only | sleeve flares behind the far wall, countersunk | hole diameter and grip range | manufacturer test data |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What material should Expansion Blind Fasteners for Hollow Section be for outdoor use?

For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate.

### Are Expansion Blind Fasteners for Hollow Section made to a recognized standard?

Yes — they are manufactured to Trade series (expansion blind fasteners), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### What are Expansion Blind Fasteners for Hollow Section used for?

Structural and machine joints that must be tightened to a controlled preload. They are supplied to Trade series (expansion blind fasteners).

### Which industries use Expansion Blind Fasteners for Hollow Section?

They are commonly specified in maintenance & repair (mro), fabrication & metalwork and structural steel, among other sectors.

### Can I get a quote for Expansion Blind Fasteners for Hollow Section in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Expansion Blind Fasteners for Hollow Section — specifications & sizes](https://engineeringhardware.com/fastener/expansion-blind-fasteners-for-hollow-section/)

### Expansion Blind Fasteners for Hollow Section Specification Guides

### Related Fastener Applications
