---
title: "What Are Fabric Snap Fasteners Used For?"
description: "Fabric Snap Fasteners (Trade series (fabric snap fasteners)) are used for joining fabric to a mating stud so a cover can be installed and removed without a l…"
url: https://engineeringhardware.com/applications/fabric-snap-fasteners/
source: Engineering Hardware & Fasteners
---

# What Are Fabric Snap Fasteners Used For?

Rivets · Trade series (fabric snap fasteners) · Application guide

Typical applications, the industries that specify fabric snap fasteners, and how to choose the right size, material and finish for the joint.

Fabric Snap Fasteners are used for joining fabric to a mating stud so a cover can be installed and removed without a loose nut. They are manufactured to Trade series (fabric snap fasteners), and selection is driven by the screw size, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Joining fabric to a mating stud so a cover can be installed and removed without a loose nut
- **Governing standard:** Trade series (fabric snap fasteners)
- **Screw size range:** 1/2 to 9/16
- **Category:** Rivets

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Fabric Snap Fasteners Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Fabric-Snap-Fasteners.webp)

Application guide for Fabric Snap Fasteners to Trade series (fabric snap fasteners). The core duty of the type is joining fabric to a mating stud so a cover can be installed and removed without a loose nut. The typical industries, the how-to-specify checklist, assembly practice and the exclusion cases are set out below. Stocked across roughly 1 to 9, they cover general to heavy-duty work.

## Typical Applications for Fabric Snap Fasteners

The most common settings where these are specified:

- **Marine canvas:** Snap sets attach fabric panels to solid surfaces with removable hardware.
- **Vehicle interiors:** Threaded or blind-rivet studs secure trim and covers.
- **Outdoor covers:** Stainless and plated options follow moisture exposure.
- **Upholstery:** Snap diameter and stud form match the material stack.

Product catalog

## Related Fabric Snap Fasteners products

[![Wholesale and Retai High Quality Deutz Engine Spare Parts 04292209 Snap Ring](https://img.engineeringhardware.com/Wholesale-and-Retai-High-Quality-Deutz-Engine-Spare-Parts-04292209-Snap-Ring.webp)](https://engineeringhardware.com/product/wholesale-and-retai-high-quality-deutz-engine-spare-parts-04292209-snap-ring/)

Spiral, Snap & Specialty Retaining Rings

### [Wholesale and Retai High Quality Deutz Engine Spare Parts 04292209 Snap Ring](https://engineeringhardware.com/product/wholesale-and-retai-high-quality-deutz-engine-spare-parts-04292209-snap-ring/)

Snap Ring · Iron

**US$0.24 – 0.36**MOQ 1 piece

[![Wholesale China Factory High Quality Concrete Nails for Construction Various Styles-Double Cap Cupped Spiral Ring Made Steel](https://img.engineeringhardware.com/Wholesale-China-Factory-High-Quality-Concrete-Nails-for-Construction-Various-Styles-Double-Cap-Cupped-Spiral-Ring-Made-Steel.webp)](https://engineeringhardware.com/product/wholesale-china-factory-high-quality-concrete-nails-for-construction-various-styles/)

Spiral, Snap & Specialty Retaining Rings

### [Wholesale China Factory High Quality Concrete Nails for Construction Various Styles-Double Cap Cupped Spiral Ring Made Steel](https://engineeringhardware.com/product/wholesale-china-factory-high-quality-concrete-nails-for-construction-various-styles/)

Common Nail · Steel

**US$0.92 – 2.94**MOQ 500 boxes

[![Customized Snap Ring Retaining Rings](https://img.engineeringhardware.com/Customized-Snap-Ring-Retaining-Rings.webp)](https://engineeringhardware.com/product/customized-snap-ring-retaining-rings/)

Spiral, Snap & Specialty Retaining Rings

### [Customized Snap Ring Retaining Rings](https://engineeringhardware.com/product/customized-snap-ring-retaining-rings/)

GB/T20057-2006 · Carbon Steel

**US$0.24**MOQ 1,000 pieces

[![Stainless Steel Spring Retaining Ring with Internal Tabs](https://img.engineeringhardware.com/Stainless-Steel-Spring-Retaining-Ring-with-Internal-Tabs.webp)](https://engineeringhardware.com/product/stainless-steel-spring-retaining-ring-with-internal-tabs/)

Spiral, Snap & Specialty Retaining Rings

### [Stainless Steel Spring Retaining Ring with Internal Tabs](https://engineeringhardware.com/product/stainless-steel-spring-retaining-ring-with-internal-tabs/)

Stainless Steel · Custom

**US$3.60 – 9.60**MOQ 100 pieces

[![304 Stainless Steel Shaft Retaining Ring/Elastic Snap Ring/C-Shaped Snap Ring](https://img.engineeringhardware.com/304-Stainless-Steel-Shaft-Retaining-Ring-Elastic-Snap-Ring-C-Shaped-Snap-Ring.webp)](https://engineeringhardware.com/product/304-stainless-steel-shaft-retaining-ring-elastic-snap-ring-c-shaped-snap-ring/)

Spiral, Snap & Specialty Retaining Rings

### [304 Stainless Steel Shaft Retaining Ring/Elastic Snap Ring/C-Shaped Snap Ring](https://engineeringhardware.com/product/304-stainless-steel-shaft-retaining-ring-elastic-snap-ring-c-shaped-snap-ring/)

Stainless Steel · Circlip

**US$0.012 – 0.036**MOQ 1,000 pieces

[![Hastelloy C276 / Inconel 718 Custom Retaining Snap Rings for Oil & Gas](https://img.engineeringhardware.com/Hastelloy-C276-Inconel-718-Custom-Retaining-Snap-Rings-for-Oil-Gas.webp)](https://engineeringhardware.com/product/hastelloy-c276-inconel-718-custom-retaining-snap-rings-for-oil-gas/)

Spiral, Snap & Specialty Retaining Rings

### [Hastelloy C276 / Inconel 718 Custom Retaining Snap Rings for Oil & Gas](https://engineeringhardware.com/product/hastelloy-c276-inconel-718-custom-retaining-snap-rings-for-oil-gas/)

Stainless Steel · Circlip

**US$2.40**MOQ 1 piece

[View all Spiral, Snap & Specialty Retaining Rings →](https://engineeringhardware.com/fastener-products/retaining-rings-locking-hardware/spiral-snap-specialty-retaining-rings/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Fabric Snap Fasteners for Your Application

- **Size:** Select on screw size, and confirm it against the mating feature in the assembly. This product spans 1–9; check the full table below for the exact dimensions of each size.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (fabric snap fasteners). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Drill the hole 0.1 mm over the nominal rivet diameter and deburr both sides before setting.
- Grip range must match the total joint thickness — a rivet set outside its grip range clamps poorly and works loose.

## Common Selection Mistakes with Fabric Snap Fasteners

- Setting a rivet outside its grip range, which leaves the joint loose from day one.
- Using aluminum rivets on steel sheet outdoors — galvanic corrosion eats the rivet.

## Where Fabric Snap Fasteners Are Not the Right Choice

Not where the joint must later be disassembled, and not for high-tension structural connections.

Custom manufacturing · Made to drawing

## Need a fabric snap fasteners outside the standard range?

Body diameter, grip range, head form and body/mandrel material combination can all be specified against the joint rather than chosen from a table. Made by cold heading or drawing.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom rivet manufacturing](https://engineeringhardware.com/custom/rivets/)[Send a drawing](https://engineeringhardware.com/custom/rivets/#rfq)

## Technical Drawing

Dimensioned line drawing of 1/2 Fabric Snap Fasteners to Trade series (fabric snap fasteners). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Stud form:** threaded stud
- **Stud thread / screw:** 8-32
- **Stud length (in):** 3/16 or 1/2
- **Material options:** 18-8 stainless / black- or nickel-plated brass or steel
- **Fabric / panel selection:** match the mating fabric hardware

## Dimensions & Specifications (Trade series (fabric snap fasteners))

| Snap diameter (in) | Stud form | Stud thread / screw | Stud length (in) | Material options | Fabric / panel selection |
| --- | --- | --- | --- | --- | --- |
| 1/2 | threaded stud | 8-32 | 3/16 or 1/2 | 18-8 stainless / black- or nickel-plated brass or steel | match the mating fabric hardware |
| 9/16 | tapping-screw stud | No. 7 | 3/8 | 18-8 stainless / black- or nickel-plated brass or steel | match the mating fabric hardware |
| 9/16 | blind-rivet stud |  |  | 18-8 stainless / black- or nickel-plated brass or steel | 0.125~0.188 or 0.188~0.375 in; 0.125 in hole |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Are Fabric Snap Fasteners made to a recognized standard?

Yes — they are manufactured to Trade series (fabric snap fasteners), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### What are Fabric Snap Fasteners used for?

Joining fabric to a mating stud so a cover can be installed and removed without a loose nut. They are supplied to Trade series (fabric snap fasteners).

### Which industries use Fabric Snap Fasteners?

They are commonly specified in upholstery, marine canvas and vehicle interiors, among other sectors.

### How do I choose the right size of Fabric Snap Fasteners?

Select on screw size and on the fit the assembly requires. This product is available from 1 to 9; the full dimension table on this page lists each size.

### Can I get a quote for Fabric Snap Fasteners in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Fabric Snap Fasteners — specifications & sizes](https://engineeringhardware.com/fastener/fabric-snap-fasteners/)

### Fabric Snap Fasteners Specification Guides

### Related Fastener Applications