---
title: "What Are JIS Cross-Recess Micro Screws Used For?"
description: "JIS Cross-Recess Micro Screws (Trade series (JIS cross-recess micro screws)) are used for threaded assemblies where the head drive and seating style matter."
url: https://engineeringhardware.com/applications/jis-cross-recess-micro-screws/
source: Engineering Hardware & Fasteners
---

# What Are JIS Cross-Recess Micro Screws Used For?

Screws · Trade series (JIS cross-recess micro screws) · Application guide

Typical applications, the industries that specify jis cross-recess micro screws, and how to choose the right size, material and finish for the joint.

JIS Cross-Recess Micro Screws are used for threaded assemblies where the head drive and seating style matter. They are manufactured to Trade series (JIS cross-recess micro screws), and the choice of size, property class and finish is driven by the load in the joint and the environment it sits in.

- **Primary duty:** Threaded assemblies where the head drive and seating style matter
- **Governing standard:** Trade series (JIS cross-recess micro screws)
- **Thread size range:** M1.0 to M1.7
- **Category:** Screws

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are JIS Cross-Recess Micro Screws Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/310Micro-JCIS-Micro-Screws.webp)

The primary duty of JIS Cross-Recess Micro Screws is threaded assemblies where the head drive and seating style matter. Below: the sectors that specify them in volume, the checklist used to select the right size and material for the application, installation notes, and the known limits of the type. Stocked across roughly M1 to M1.7, they cover light-duty and instrument-scale work.

## Typical Applications for JIS Cross-Recess Micro Screws

The most common settings where these are specified:

- **Consumer electronics:** JIS cross recesses suit compact assemblies designed around Japanese service tooling.
- **Camera equipment:** Short micro lengths secure covers and internal brackets.
- **Instrument repair:** Trivalent zinc finishes support small replacement sets.
- **Precision production:** Head height and length are selected for a confined enclosure.

Product catalog

## Related Micro & Miniature Screws products

[![Customized Service Taiwan Quality Painted Hex Burnished Slate Color Head Roof Screw Self Drilling Screw with EPDM Bonded Washer](https://img.engineeringhardware.com/Customized-Service-Taiwan-Quality-Painted-Hex-Burnished-Slate-Color-Head-Roof-Screw-Self-Drilling-Screw-with-EPDM-Bonded-Washer.webp)](https://engineeringhardware.com/product/customized-service-taiwan-quality-painted-hex-burnished-slate-color-head-roof-screw/)

Self-Drilling & Tek Screws

### [Customized Service Taiwan Quality Painted Hex Burnished Slate Color Head Roof Screw Self Drilling Screw with EPDM Bonded Washer](https://engineeringhardware.com/product/customized-service-taiwan-quality-painted-hex-burnished-slate-color-head-roof-screw/)

Ss/Steel · Hex

**US$0.012 – 0.018**MOQ 300 mpcs

[![Stainless Steel Pan Head Self-Drilling Screws DIN 18182-2 Standard Grade 4.8/6.8, Lb Class](https://img.engineeringhardware.com/Stainless-Steel-Pan-Head-Self-Drilling-Screws-DIN-18182-2-Standard-Grade-4-8-6-8-Lb-Class.webp)](https://engineeringhardware.com/product/stainless-steel-pan-head-self-drilling-screws-din-18182-2-standard-grade-4-8-6-8-lb/)

Self-Drilling & Tek Screws

### [Stainless Steel Pan Head Self-Drilling Screws DIN 18182-2 Standard Grade 4.8/6.8, Lb Class](https://engineeringhardware.com/product/stainless-steel-pan-head-self-drilling-screws-din-18182-2-standard-grade-4-8-6-8-lb/)

Round Head · DIN, GB, ANSI, JIS

**US$0.012 – 0.096**MOQ 1,000 pieces

[![Round Head Drill Tail Wire Head Self-Drilling Screw Galvanized Factory Direct Sales](https://img.engineeringhardware.com/Round-Head-Drill-Tail-Wire-Head-Self-Drilling-Screw-Galvanized-Factory-Direct-Sales.webp)](https://engineeringhardware.com/product/round-head-drill-tail-wire-head-self-drilling-screw-galvanized-factory-direct-sales/)

Self-Drilling & Tek Screws

### [Round Head Drill Tail Wire Head Self-Drilling Screw Galvanized Factory Direct Sales](https://engineeringhardware.com/product/round-head-drill-tail-wire-head-self-drilling-screw-galvanized-factory-direct-sales/)

Round Head · DIN, GB, ANSI, BSW

**US$0.012**MOQ 1,000 pieces

[![Wxsny Galvanized Hex Head Self Drilling Roofing Screw with EPDM Washer Heavy Duty Metal to Metal Building Construction](https://img.engineeringhardware.com/Wxsny-Galvanized-Hex-Head-Self-Drilling-Roofing-Screw-with-EPDM-Washer-Heavy-Duty-Metal-to-Metal-Building-Construction.webp)](https://engineeringhardware.com/product/wxsny-galvanized-hex-head-self-drilling-roofing-screw-with-epdm-washer-heavy-duty/)

Self-Drilling & Tek Screws

### [Wxsny Galvanized Hex Head Self Drilling Roofing Screw with EPDM Washer Heavy Duty Metal to Metal Building Construction](https://engineeringhardware.com/product/wxsny-galvanized-hex-head-self-drilling-roofing-screw-with-epdm-washer-heavy-duty/)

Star/Round/L/Flat/Custom · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.012 – 0.036**MOQ 500 pieces

[![Wholesale Galvanized Metal Hexagon Head Tek Wood Self Drilling Tapping Screw for Building Decoration Engineering](https://img.engineeringhardware.com/Wholesale-Galvanized-Metal-Hexagon-Head-Tek-Wood-Self-Drilling-Tapping-Screw-for-Building-Decoration-Engineering.webp)](https://engineeringhardware.com/product/wholesale-galvanized-metal-hexagon-head-tek-wood-self-drilling-tapping-screw-for/)

Self-Drilling & Tek Screws

### [Wholesale Galvanized Metal Hexagon Head Tek Wood Self Drilling Tapping Screw for Building Decoration Engineering](https://engineeringhardware.com/product/wholesale-galvanized-metal-hexagon-head-tek-wood-self-drilling-tapping-screw-for/)

Hexagon Head · DIN, GB, ANSI, BSW

**US$11.88 – 24.00**MOQ 1 kilogram

[![Vodafast Stainless Steel Hexagon Washer Head Self Drilling Screw](https://img.engineeringhardware.com/Vodafast-Stainless-Steel-Hexagon-Washer-Head-Self-Drilling-Screw.webp)](https://engineeringhardware.com/product/vodafast-stainless-steel-hexagon-washer-head-self-drilling-screw/)

Self-Drilling & Tek Screws

### [Vodafast Stainless Steel Hexagon Washer Head Self Drilling Screw](https://engineeringhardware.com/product/vodafast-stainless-steel-hexagon-washer-head-self-drilling-screw/)

All Kinds · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.0084 – 0.012**MOQ 10,000 pieces

[View all Self-Drilling & Tek Screws →](https://engineeringhardware.com/fastener-products/screws/self-drilling-tek-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify JIS Cross-Recess Micro Screws for Your Application

- **Size:** Match the nominal size to the mating thread or hole. This product spans M1–M1.7; check the full table below for the exact dimensions of each size.
- **Drive & head:** Pick the drive (socket, cross, slot) and head style for the tool access and seating surface; a recessed drive resists cam-out under power tools.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (JIS cross-recess micro screws). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Match the driver exactly to the recess (PH ≠ PZ; hex key sizes per ISO 2936) and keep the tool axial — side load is the main cause of stripped drives.
- In tapped holes, engage a thread length of at least 1× the nominal diameter in steel, 2× in aluminum.
- Set power tools to a torque that seats the head without embedding it into the mating surface.

## Common Selection Mistakes with JIS Cross-Recess Micro Screws

- Under-sizing the drive for the installation torque — a small recess at high torque strips before the screw is seated.
- Using a countersunk head in thin sheet where the countersink removes most of the load-bearing material.
- Specifying stainless in high-strength duty: A2-70 is roughly class 7 steel, not a 10.9 substitute.

## Where JIS Cross-Recess Micro Screws Are Not the Right Choice

Not for high-preload structural joints (use a property-class bolt and nut), and not in thin sheet where a self-drilling or self-tapping type suits better.

Custom manufacturing · Made to drawing

## Need a JIS cross-recess micro screws outside the standard range?

Lengths and thread lengths outside the standard table are the commonest request, followed by a drive the standard does not offer and a head marked with your own part number. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of M1.0 JIS Cross-Recess Micro Screws to Trade series (JIS cross-recess micro screws). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Head diameter (mm):** 1.8
- **Head height (mm):** 0.50
- **Length options (mm):** 2.5
- **Drive:** JCIS/JIS #0–1
- **Finish:** trivalent zinc-plated steel

## Dimensions & Specifications (Trade series (JIS cross-recess micro screws))

| Thread size | Head diameter (mm) | Head height (mm) | Length options (mm) | Drive | Finish |
| --- | --- | --- | --- | --- | --- |
| M1.0 | 1.8 | 0.50 | 2.5 | JCIS/JIS #0–1 | trivalent zinc-plated steel |
| M1.2 | 1.8 | 0.50 | 2~5 | JCIS/JIS #0–1 | trivalent zinc-plated steel |
| M1.4 | 2.0 | 0.50 | 1.4~12 | JCIS/JIS #0–1 | trivalent zinc-plated steel |
| M1.6 | 2.3 | 0.50 | 1.5~12 | JCIS/JIS #0–1 | trivalent zinc-plated steel |
| M1.7 | 2.5 | 0.50 | 1.5~14 | JCIS/JIS #0–1 | trivalent zinc-plated steel |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Are JIS Cross-Recess Micro Screws made to a recognized standard?

Yes — they are manufactured to Trade series (JIS cross-recess micro screws), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### What are JIS Cross-Recess Micro Screws used for?

Threaded assemblies where the head drive and seating style matter. They are supplied to Trade series (JIS cross-recess micro screws).

### Which industries use JIS Cross-Recess Micro Screws?

They are commonly specified in precision production, consumer electronics and camera equipment, among other sectors.

### How do I choose the right size of JIS Cross-Recess Micro Screws?

Match the nominal size to the mating thread or hole. This product is available from M1 to M1.7; the full dimension table on this page lists each size.

### Can I get a quote for JIS Cross-Recess Micro Screws in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [JIS Cross-Recess Micro Screws — specifications & sizes](https://engineeringhardware.com/fastener/jis-cross-recess-micro-screws/)

### JIS Cross-Recess Micro Screws Specification Guides

### Related Fastener Applications
