---
title: "What Are Landscape Fabric Staples and Sod Staples Used For?"
description: "Landscape Fabric Staples and Sod Staples (Trade series (landscape staples)) are used for pinning fabric, sod and erosion blankets to soil with a U-shaped ste…"
url: https://engineeringhardware.com/applications/landscape-fabric-staples-and-sod-staples/
source: Engineering Hardware & Fasteners
---

# What Are Landscape Fabric Staples and Sod Staples Used For?

Nails · Trade series (landscape staples) · Application guide

Typical applications, the industries that specify landscape fabric staples and sod staples, and how to choose the right size, material and finish for the joint.

Landscape Fabric Staples and Sod Staples are used for pinning fabric, sod and erosion blankets to soil with a U-shaped steel staple. They are manufactured to Trade series (landscape staples), and selection is driven by the nominal size, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Pinning fabric, sod and erosion blankets to soil with a U-shaped steel staple
- **Governing standard:** Trade series (landscape staples)
- **Nominal size range:** 4 × 1 to 10 × 2 × 10
- **Category:** Nails

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Landscape Fabric Staples and Sod Staples Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Landscape-Fabric-Staples-Sod-Staples.webp)

Landscape Fabric Staples and Sod Staples (Trade series (landscape staples)) are specified where the joint requires pinning fabric, sod and erosion blankets to soil with a U-shaped steel staple. The sections below cover the typical end-uses by industry, the size and material decisions for each, assembly practice, and the applications this fastener type is not suited to. Stocked across roughly 4 mm to 10 mm, they cover general to heavy-duty work.

## Typical Applications for Landscape Fabric Staples and Sod Staples

The most common settings where these are specified:

- **Landscape installation:** Steel U-staples hold fabric, sod and erosion blankets to soil.
- **Erosion control:** Longer staples retain netting and blankets during surface establishment.
- **Garden construction:** 4–10 in sizes cover common fabric and sod layouts.
- **Outdoor maintenance:** Raw or galvanized steel options follow the expected exposure.

Product catalog

## Related Landscape Fabric Staples products

[![Nylon Staple Fiber 50dx65mm](https://img.engineeringhardware.com/Nylon-Staple-Fiber-50dx65mm.webp)](https://engineeringhardware.com/product/nylon-staple-fiber-50dx65mm/)

Industrial Staples & Fencing Staples

### [Nylon Staple Fiber 50dx65mm](https://engineeringhardware.com/product/nylon-staple-fiber-50dx65mm/)

Polyamide Fiber (Nylon) · Spinning, Non-Woven Fabric

**US$4,800 – 6,000**MOQ 1 ton

[![20ga 80/10 Industrial Multipurpose Shipping Box Staple for Furniture](https://img.engineeringhardware.com/20ga-80-10-Industrial-Multipurpose-Shipping-Box-Staple-for-Furniture.webp)](https://engineeringhardware.com/product/20ga-80-10-industrial-multipurpose-shipping-box-staple-for-furniture/)

Industrial Staples & Fencing Staples

### [20ga 80/10 Industrial Multipurpose Shipping Box Staple for Furniture](https://engineeringhardware.com/product/20ga-80-10-industrial-multipurpose-shipping-box-staple-for-furniture/)

U-Type Nail · ISO

**US$1.38 – 1.44**MOQ 5,000 boxes

[![16 Gauge 15/16 Inch Crown Gsw16 Series 44mm Length Staples](https://img.engineeringhardware.com/16-Gauge-15-16-Inch-Crown-Gsw16-Series-44mm-Length-Staples.webp)](https://engineeringhardware.com/product/16-gauge-15-16-inch-crown-gsw16-series-44mm-length-staples/)

Industrial Staples & Fencing Staples

### [16 Gauge 15/16 Inch Crown Gsw16 Series 44mm Length Staples](https://engineeringhardware.com/product/16-gauge-15-16-inch-crown-gsw16-series-44mm-length-staples/)

Decorative Nail · Steel

**US$11.16 – 22.68**MOQ 120 ctn

[![1″Xbwg9 Bright Fence Staple with Smooth Shank and Cut Point](https://img.engineeringhardware.com/1-Xbwg9-Bright-Fence-Staple-with-Smooth-Shank-and-Cut-Point.webp)](https://engineeringhardware.com/product/1-xbwg9-bright-fence-staple-with-smooth-shank-and-cut-point/)

Industrial Staples & Fencing Staples

### [1″Xbwg9 Bright Fence Staple with Smooth Shank and Cut Point](https://engineeringhardware.com/product/1-xbwg9-bright-fence-staple-with-smooth-shank-and-cut-point/)

U-Type Nail · ANSI

**US$684.00 – 780.00**MOQ 5 tons

[![16 Gauge BCS4 Series 1/2 Inch Crown 38mm Length Heavy Wire Staples](https://img.engineeringhardware.com/16-Gauge-BCS4-Series-1-2-Inch-Crown-38mm-Length-Heavy-Wire-Staples.webp)](https://engineeringhardware.com/product/16-gauge-bcs4-series-1-2-inch-crown-38mm-length-heavy-wire-staples/)

Industrial Staples & Fencing Staples

### [16 Gauge BCS4 Series 1/2 Inch Crown 38mm Length Heavy Wire Staples](https://engineeringhardware.com/product/16-gauge-bcs4-series-1-2-inch-crown-38mm-length-heavy-wire-staples/)

Decorative Nail · Steel

**US$11.76 – 23.40**MOQ 120 ctn

[![Staples Material Band for Production Line Brad Nail Band](https://img.engineeringhardware.com/Staples-Material-Band-for-Production-Line-Brad-Nail-Band.webp)](https://engineeringhardware.com/product/staples-material-band-for-production-line-brad-nail-band/)

Industrial Staples & Fencing Staples

### [Staples Material Band for Production Line Brad Nail Band](https://engineeringhardware.com/product/staples-material-band-for-production-line-brad-nail-band/)

Staple Pin · ISO

**US$1,080 – 2,160**MOQ 5 tons

[View all Industrial Staples & Fencing Staples →](https://engineeringhardware.com/fastener-products/nails-staples-tacks/industrial-staples-fencing-staples/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Landscape Fabric Staples and Sod Staples for Your Application

- **Size:** Select on nominal size, and confirm it against the mating feature in the assembly. This product spans 4 mm–10 mm; check the full table below for the exact dimensions of each size.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (landscape staples). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Where Landscape Fabric Staples and Sod Staples Are Not the Right Choice

Not for joints needing later removal or high withdrawal resistance — a screw holds far better in tension.

Custom manufacturing · Made to drawing

## Need a landscape fabric staples and sod staples outside the standard range?

A non-standard nail is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom nail manufacturing](https://engineeringhardware.com/custom/nails/)[Send a drawing](https://engineeringhardware.com/custom/nails/#rfq)

## Technical Drawing

Dimensioned line drawing of 4 × 1 Landscape Fabric Staples and Sod Staples to Trade series (landscape staples). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Wire gauge:** 11
- **Material / finish:** raw or non-galvanized steel
- **Packaging examples:** 1000 per carton
- **Use:** landscape fabric, sod and netting

## Dimensions & Specifications (Trade series (landscape staples))

| Height × width (in) | Wire gauge | Material / finish | Packaging examples | Use |
| --- | --- | --- | --- | --- |
| 4 × 1 | 11 | raw or non-galvanized steel | 1000 per carton | landscape fabric, sod and netting |
| 6 × 1 × 6 | 11 | raw or non-galvanized steel | 500 / 1000 per box | landscape fabric, sod and erosion blankets |
| 8 × 2 × 8 | 11 | raw steel | 1000 per box | landscape fabric and netting |
| 10 × 2 × 10 | 8 | raw steel | 500 per box | landscape fabric and erosion blankets |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Which industries use Landscape Fabric Staples and Sod Staples?

They are commonly specified in landscape installation, erosion control and garden construction, among other sectors.

### How do I choose the right size of Landscape Fabric Staples and Sod Staples?

Select on nominal size and on the fit the assembly requires. This product is available from 4 mm to 10 mm; the full dimension table on this page lists each size.

### Do Landscape Fabric Staples and Sod Staples hold as well as screws?

Nails resist shear well and drive fast, but screws hold far better in withdrawal (tension). Use screws where the joint is loaded in pull-out or may need removal.

### Are Landscape Fabric Staples and Sod Staples made to a recognized standard?

Yes — they are manufactured to Trade series (landscape staples), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### Can I get a quote for Landscape Fabric Staples and Sod Staples in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Landscape Fabric Staples and Sod Staples — specifications & sizes](https://engineeringhardware.com/fastener/landscape-fabric-staples-and-sod-staples/)

### Landscape Fabric Staples and Sod Staples Specification Guides

### Related Fastener Applications