--- title: "What Are NPT Pipe Thread Fittings Used For?" description: "NPT Pipe Thread Fittings (ASME B1.20.1) are used for joining and sealing fluid or pneumatic lines. Catalogued 1-1/2 NPT to 6 NPT." url: https://engineeringhardware.com/applications/npt-pipe-thread-fittings/ source: Engineering Hardware & Fasteners --- # What Are NPT Pipe Thread Fittings Used For? Pipe & Pneumatic Fittings · ASME B1.20.1 · Application guide Typical applications, the industries that specify npt pipe thread fittings, and how to choose the right size, material and finish for the joint. NPT Pipe Thread Fittings are used for joining and sealing fluid or pneumatic lines. They are manufactured to ASME B1.20.1, and selection is driven by the screw size, the fit and tolerance the assembly requires, and the service environment. - **Primary duty:** Joining and sealing fluid or pneumatic lines - **Governing standard:** ASME B1.20.1 - **Screw size range:** 1-1/2 NPT to 6 NPT - **Category:** Pipe & Pneumatic Fittings Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation. ![What Are NPT Pipe Thread Fittings Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/06/NPT-Pipe-Thread-Fittings-—-ASME-B1.20.1.webp) The primary duty of NPT Pipe Thread Fittings is joining and sealing fluid or pneumatic lines. Below: the sectors that specify them in volume, the checklist used to select the right size and material for the application, installation notes, and the known limits of the type. Stocked across roughly 1 to 6, they cover light-duty and instrument-scale work. ## Typical Applications for NPT Pipe Thread Fittings The most common settings where these are specified: - **Hydraulic & fluid power:** sealed, pressure-rated joints in fluid lines. - **Process & plant piping:** tapped connections on manifolds and equipment. - **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment. - **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched. - **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments. ## How to Specify NPT Pipe Thread Fittings for Your Application - **Size:** Match the nominal size to the mating thread or hole. This product spans 1–6; check the full table below for the exact dimensions of each size. - **Thread & pressure:** Match the thread form (BSP/NPT/metric) and pressure rating to the line, and seal appropriately (tape, sealant or O-ring). - **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient. - **Standard:** This product is supplied to ASME B1.20.1. Quoting the standard on your order guarantees interchangeable dimensions between suppliers. ## Installation & Assembly Practice - Seal tapered threads with PTFE tape or anaerobic sealant applied clear of the first thread; parallel threads seal on a washer or O-ring, not on the thread. - Tighten to the fitting manufacturer's torque — over-tightening tapered threads splits female ports. ## Common Selection Mistakes with NPT Pipe Thread Fittings - Mating BSP and NPT threads directly — the 55°/60° forms do not seal against each other. - Exceeding the pressure rating of the lowest-rated component in the line. ## Where NPT Pipe Thread Fittings Are Not the Right Choice Do not mix thread forms (BSP into NPT) without an adapter, and do not exceed the pressure rating of the lowest-rated component. Custom manufacturing · Made to drawing ## Need a NPT pipe thread fittings outside the standard range? Dimensions, material, finish and form are specified from the drawing — a pipe & pneumatic fitting outside the standard range is a variation on existing tooling rather than a new design. Minimum order from 2,000 pieces; samples within 7 days of drawing approval. [Custom pipe & pneumatic fitting manufacturing](https://engineeringhardware.com/custom/fittings/)[Send a drawing](https://engineeringhardware.com/custom/fittings/#rfq) ## Technical Drawing Dimensioned line drawing of 1/16 NPT NPT Pipe Thread Fittings to ASME B1.20.1. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected. - **Nominal size (in):** 1/16 - **Major diameter (mm):** 7.938 - **Pitch (mm):** 0.941 - **Threads per inch (TPI):** 27 - **Taper:** 1:16 - **Notes:** Tapered pipe thread, self-sealing ## Dimensions & Specifications (ASME B1.20.1) | Size | Nominal size (in) | Major diameter (mm) | Pitch (mm) | Threads per inch (TPI) | Taper | Reference standard | Notes | | --- | --- | --- | --- | --- | --- | --- | --- | | 1/16 NPT | 1/16 | 7.938 | 0.941 | 27 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 1/8 NPT | 1/8 | 10.287 | 0.941 | 27 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 1/4 NPT | 1/4 | 13.716 | 1.411 | 18 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 3/8 NPT | 3/8 | 17.145 | 1.411 | 18 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 1/2 NPT | 1/2 | 21.336 | 1.814 | 14 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 3/4 NPT | 3/4 | 26.67 | 1.814 | 14 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 1 NPT | 1 | 33.401 | 2.209 | 11.5 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 1-1/4 NPT | 1-1/4 | 42.164 | 2.209 | 11.5 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 1-1/2 NPT | 1-1/2 | 48.26 | 2.209 | 11.5 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 2 NPT | 2 | 60.325 | 2.209 | 11.5 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 2-1/2 NPT | 2-1/2 | 73.025 | 3.175 | 8 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 3 NPT | 3 | 88.9 | 3.175 | 8 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 3-1/2 NPT | 3-1/2 | 101.6 | 3.175 | 8 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 4 NPT | 4 | 114.3 | 3.175 | 8 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 5 NPT | 5 | 141.3 | 3.175 | 8 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | | 6 NPT | 6 | 168.275 | 3.175 | 8 | 1:16 | ASME B1.20.1 | Tapered pipe thread, self-sealing | Inside the plant ## Manufactured in our own plant This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided. 1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift. 2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g. 3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1. 4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227. ## Frequently Asked Questions ### What material should NPT Pipe Thread Fittings be for outdoor use? For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate. ### Are NPT Pipe Thread Fittings made to a recognized standard? Yes — they are manufactured to ASME B1.20.1, so dimensions are interchangeable between suppliers when you quote the standard on your order. ### What are NPT Pipe Thread Fittings used for? Joining and sealing fluid or pneumatic lines. They are supplied to ASME B1.20.1. ### Which industries use NPT Pipe Thread Fittings? They are commonly specified in hydraulic & fluid power, process & plant piping and general machine building, among other sectors. ### Can I get a quote for NPT Pipe Thread Fittings in the size and material I need? Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time. ## Related Pages Product page: [NPT Pipe Thread Fittings — specifications & sizes](https://engineeringhardware.com/fastener/npt-pipe-thread-fittings/) ### NPT Pipe Thread Fittings Specification Guides ### Related Fastener Applications