---
title: "What Are Square Flat Washers (GB/T 96) Used For?"
description: "Square Flat Washers (GB/T 96) (GB/T 96) are used for load distribution and anti-loosening under a bolt or nut. Catalogued M8 to M16."
url: https://engineeringhardware.com/applications/square-flat-washers-gb-t-96/
source: Engineering Hardware & Fasteners
---

# What Are Square Flat Washers (GB/T 96) Used For?

Washers · GB/T 96 · Application guide

Typical applications, the industries that specify square flat washers (gb/t 96), and how to choose the right size, material and finish for the joint.

Square Flat Washers (GB/T 96) are used for load distribution and anti-loosening under a bolt or nut. They are manufactured to GB/T 96, and selection is driven by the nominal bolt size, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Load distribution and anti-loosening under a bolt or nut
- **Governing standard:** GB/T 96
- **Nominal bolt size range:** M8 to M16
- **Category:** Washers

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Square Flat Washers (GB/T 96) Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Square-Flat-Washers-GB-T-96.webp)

Square Flat Washers (GB/T 96) are selected when an assembly calls for load distribution and anti-loosening under a bolt or nut. This application guide to the GB/T 96 type covers concrete end-uses, the specification checklist, correct installation, and where an alternative fastener performs better. Stocked across roughly M8 to M16, they cover general to heavy-duty work.

## Typical Applications for Square Flat Washers (GB/T 96)

The most common settings where these are specified:

- **Timber & soft materials:** large-OD types that prevent pull-through.
- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.
- **Bolted structural joints:** spreading load over soft or oversized holes and protecting the surface.

Product catalog

## Related Square Flat Washers products

[![Single or Dual-Chamber Helmet Washer with High-Pressure Wash and UV Ozone](https://img.engineeringhardware.com/Single-or-Dual-Chamber-Helmet-Washer-with-High-Pressure-Wash-and-UV-Ozone.webp)](https://engineeringhardware.com/product/single-or-dual-chamber-helmet-washer-with-high-pressure-wash-and-uv-ozone/)

Flat & Other Precision Washers

### [Single or Dual-Chamber Helmet Washer with High-Pressure Wash and UV Ozone](https://engineeringhardware.com/product/single-or-dual-chamber-helmet-washer-with-high-pressure-wash-and-uv-ozone/)

Helmet Cleaning Machine · Indoor

**US$2,376 – 2,700**MOQ 1 piece

[![Bucket Sand Washer Plant Wheel Bucket Sand Washer for Mining, Quarry & Construction](https://img.engineeringhardware.com/Bucket-Sand-Washer-Plant-Wheel-Bucket-Sand-Washer-for-Mining-Quarry-Construction.webp)](https://engineeringhardware.com/product/bucket-sand-washer-plant-wheel-bucket-sand-washer-for-mining-quarry-construction/)

Flat & Other Precision Washers

### [Bucket Sand Washer Plant Wheel Bucket Sand Washer for Mining, Quarry & Construction](https://engineeringhardware.com/product/bucket-sand-washer-plant-wheel-bucket-sand-washer-for-mining-quarry-construction/)

Bucket Sand Washer · Sand washing, gravel washing, river sand, constru…

**US$3,360 – 25,200**MOQ 1 piece

[![High Precision Custom Brass Flat Washer Copper Bronze Plain Shim Washer](https://img.engineeringhardware.com/High-Precision-Custom-Brass-Flat-Washer-Copper-Bronze-Plain-Shim-Washer.webp)](https://engineeringhardware.com/product/high-precision-custom-brass-flat-washer-copper-bronze-plain-shim-washer/)

Flat & Other Precision Washers

### [High Precision Custom Brass Flat Washer Copper Bronze Plain Shim Washer](https://engineeringhardware.com/product/high-precision-custom-brass-flat-washer-copper-bronze-plain-shim-washer/)

Lock Washer · Stainless Steel, Carbon Steel

**US$0.012 – 0.084**MOQ 10,000 pieces

[![Energy Efficient LED Wall Washer for Modern Lighting Solutions](https://img.engineeringhardware.com/Energy-Efficient-LED-Wall-Washer-for-Modern-Lighting-Solutions.webp)](https://engineeringhardware.com/product/energy-efficient-led-wall-washer-for-modern-lighting-solutions/)

Flat & Other Precision Washers

### [Energy Efficient LED Wall Washer for Modern Lighting Solutions](https://engineeringhardware.com/product/energy-efficient-led-wall-washer-for-modern-lighting-solutions/)

Outdoor Building, Contour Lighting for Ancient Bui · CCC, CE, RoHS

**US$5.28 – 13.20**MOQ 1 piece

[![Uniform Size Truck Washer Parts for Assembly Matching All Model Freight Trucks](https://img.engineeringhardware.com/Uniform-Size-Truck-Washer-Parts-for-Assembly-Matching-All-Model-Freight-Trucks.webp)](https://engineeringhardware.com/product/uniform-size-truck-washer-parts-for-assembly-matching-all-model-freight-trucks/)

Flat & Other Precision Washers

### [Uniform Size Truck Washer Parts for Assembly Matching All Model Freight Trucks](https://engineeringhardware.com/product/uniform-size-truck-washer-parts-for-assembly-matching-all-model-freight-trucks/)

Customizable · Steel

**US$1.20 – 5,999**MOQ 10 pieces

[![Double Wheel Large Capacity Sand Washer for Mining Stone Washing Treatment](https://img.engineeringhardware.com/Double-Wheel-Large-Capacity-Sand-Washer-for-Mining-Stone-Washing-Treatment.webp)](https://engineeringhardware.com/product/double-wheel-large-capacity-sand-washer-for-mining-stone-washing-treatment/)

Flat & Other Precision Washers

### [Double Wheel Large Capacity Sand Washer for Mining Stone Washing Treatment](https://engineeringhardware.com/product/double-wheel-large-capacity-sand-washer-for-mining-stone-washing-treatment/)

Bucket Wheel Sand Washer · ISO, CE

**US$4,171 – 10,742**MOQ 1 piece

[View all Flat & Other Precision Washers →](https://engineeringhardware.com/fastener-products/washers/flat-other-precision-washers/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Square Flat Washers (GB/T 96) for Your Application

- **Size:** Match the nominal size to the mating thread or hole. This product spans M8–M16; check the full table below for the exact dimensions of each size.
- **Type & OD:** Select flat for load spreading, spring/serrated for anti-loosening, or fender/large-OD for soft or oversized holes.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to GB/T 96. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Installation & Assembly Practice

- Place the washer under the rotating element (usually the nut) so tightening does not score the surface.
- Chamfered-hole side of a hardened washer faces the bolt head fillet.
- On serrated-flange hardware, do not add a plain washer — it defeats the serrations.

## Common Selection Mistakes with Square Flat Washers (GB/T 96)

- Relying on a spring washer for locking on class 8.8+ joints — at high preload it flattens and adds nothing.
- Choosing an OD too small for soft material, so the head pulls through or embeds.

## Where Square Flat Washers (GB/T 96) Are Not the Right Choice

A washer does not replace a locking feature on its own in severe vibration, and a spring washer adds little clamp on high-strength joints.

Custom manufacturing · Made to drawing

## Need a square flat washers (GB/T 96) outside the standard range?

Bore, outside diameter, thickness, temper and finish are the variables here — there is no thread to specify, so the fit and the bearing area are what the drawing has to pin down. Made by stamping or punching.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom washer manufacturing](https://engineeringhardware.com/custom/washers/)[Send a drawing](https://engineeringhardware.com/custom/washers/#rfq)

## Technical Drawing

Dimensioned line drawing of M8 Square Flat Washers (GB/T 96) to GB/T 96. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Material:** carbon steel or A2/A4 stainless
- **Finish options:** black oxide / blue-white zinc / yellow zinc / hot-dip galvanized
- **Typical use:** steel brackets and guardrails

## Dimensions & Specifications (GB/T 96)

| Bolt size | Material | Finish options | Typical use |
| --- | --- | --- | --- |
| M8 | carbon steel or A2/A4 stainless | black oxide / blue-white zinc / yellow zinc / hot-dip galvanized | steel brackets and guardrails |
| M10 | carbon steel or A2/A4 stainless | black oxide / blue-white zinc / yellow zinc / hot-dip galvanized | solar supports and curtain walls |
| M12 | carbon steel or A2/A4 stainless | black oxide / blue-white zinc / yellow zinc / hot-dip galvanized | embedded connections |
| M16 | carbon steel or A2/A4 stainless | black oxide / blue-white zinc / hot-dip galvanized | embedded and structural connections |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Are Square Flat Washers (GB/T 96) made to a recognized standard?

Yes — they are manufactured to GB/T 96, so dimensions are interchangeable between suppliers when you quote the standard on your order.

### What are Square Flat Washers (GB/T 96) used for?

Load distribution and anti-loosening under a bolt or nut. They are supplied to GB/T 96.

### Which industries use Square Flat Washers (GB/T 96)?

They are commonly specified in bolted structural joints, vibration applications and timber & soft materials, among other sectors.

### How do I choose the right size of Square Flat Washers (GB/T 96)?

Match the nominal size to the mating thread or hole. This product is available from M8 to M16; the full dimension table on this page lists each size.

### Can I get a quote for Square Flat Washers (GB/T 96) in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Square Flat Washers (GB/T 96) — specifications & sizes](https://engineeringhardware.com/fastener/square-flat-washers-gb-t-96/)

### Square Flat Washers (GB/T 96) Specification Guides

### Related Fastener Applications