---
title: "What Are Strut Channel Plain Nuts and Top Retainer Nuts Used For?"
description: "Strut Channel Plain Nuts and Top Retainer Nuts (Trade series (strut channel nuts)) are used for carrying or reinforcing a run of pipe, tray or rail, with sep…"
url: https://engineeringhardware.com/applications/strut-channel-plain-nuts-and-top-retainer-nuts/
source: Engineering Hardware & Fasteners
---

# What Are Strut Channel Plain Nuts and Top Retainer Nuts Used For?

Supports, Clamps & Brackets · Trade series (strut channel nuts) · Application guide

Typical applications, the industries that specify strut channel plain nuts and top retainer nuts, and how to choose the right size, material and finish for the joint.

Strut Channel Plain Nuts and Top Retainer Nuts are used for carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. They are manufactured to Trade series (strut channel nuts), and selection is driven by the nominal size, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing
- **Governing standard:** Trade series (strut channel nuts)
- **Category:** Supports, Clamps & Brackets

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Strut Channel Plain Nuts and Top Retainer Nuts Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Strut-Channel-Plain-Nuts-and-Top-Retainer-Nuts.webp)

Strut Channel Plain Nuts and Top Retainer Nuts are selected when an assembly calls for carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. This application guide to the Trade series (strut channel nuts) type covers concrete end-uses, the specification checklist, correct installation, and where an alternative fastener performs better.

## Typical Applications for Strut Channel Plain Nuts and Top Retainer Nuts

The most common settings where these are specified:

- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.

Product catalog

## Related Strut Channel Nuts products

[![China Factory Supply Carbon Steel Tee Nuts for Furniture Insert Lock 4 Prongs](https://img.engineeringhardware.com/China-Factory-Supply-Carbon-Steel-Tee-Nuts-for-Furniture-Insert-Lock-4-Prongs.webp)](https://engineeringhardware.com/product/china-factory-supply-carbon-steel-tee-nuts-for-furniture-insert-lock-4-prongs/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [China Factory Supply Carbon Steel Tee Nuts for Furniture Insert Lock 4 Prongs](https://engineeringhardware.com/product/china-factory-supply-carbon-steel-tee-nuts-for-furniture-insert-lock-4-prongs/)

Round Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.012**MOQ 1,000 pieces

[![Supply Customized Stainless Steel Hardware Parts Flange T-Nut Welded Round Nut Step Cylindrical Nut](https://img.engineeringhardware.com/Supply-Customized-Stainless-Steel-Hardware-Parts-Flange-T-Nut-Welded-Round-Nut-Step-Cylindrical-Nut.webp)](https://engineeringhardware.com/product/supply-customized-stainless-steel-hardware-parts-flange-t-nut-welded-round-nut-step/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [Supply Customized Stainless Steel Hardware Parts Flange T-Nut Welded Round Nut Step Cylindrical Nut](https://engineeringhardware.com/product/supply-customized-stainless-steel-hardware-parts-flange-t-nut-welded-round-nut-step/)

Round Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.0096 – 0.012**MOQ 1,000 pieces

[![304 316 Stainless Steel K-Nut M2 M2.5 M3 M3.5 M4 Steel Nickel Spring Nuts Locking Nut](https://img.engineeringhardware.com/304-316-Stainless-Steel-K-Nut-M2-M2-5-M3-M3-5-M4-Steel-Nickel-Spring-Nuts-Locking-Nut.webp)](https://engineeringhardware.com/product/304-316-stainless-steel-k-nut-m2-m2-5-m3-m3-5-m4-steel-nickel-spring-nuts-locking-nut/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [304 316 Stainless Steel K-Nut M2 M2.5 M3 M3.5 M4 Steel Nickel Spring Nuts Locking Nut](https://engineeringhardware.com/product/304-316-stainless-steel-k-nut-m2-m2-5-m3-m3-5-m4-steel-nickel-spring-nuts-locking-nut/)

Hexagon Head · DIN, ANSI, GB, JIS, GOST

**US$0.036 – 0.36**MOQ 1,000 pieces

[![DIN1624 Four Jaw Nut Four Claw Nut Wholesale Blue and White Zinc Plated Furniture Insert Nut](https://img.engineeringhardware.com/DIN1624-Four-Jaw-Nut-Four-Claw-Nut-Wholesale-Blue-and-White-Zinc-Plated-Furniture-Insert-Nut.webp)](https://engineeringhardware.com/product/din1624-four-jaw-nut-four-claw-nut-wholesale-blue-and-white-zinc-plated-furniture/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [DIN1624 Four Jaw Nut Four Claw Nut Wholesale Blue and White Zinc Plated Furniture Insert Nut](https://engineeringhardware.com/product/din1624-four-jaw-nut-four-claw-nut-wholesale-blue-and-white-zinc-plated-furniture/)

Four Claw T Nut · DIN, ANSI, GB, JIS, GOST, BSW, DIN.ASTM/Ansljiseniso…

**US$0.24**MOQ 10,000 pieces

[![DIN508 Standard T-Slot Nuts Lug Nuts](https://img.engineeringhardware.com/DIN508-Standard-T-Slot-Nuts-Lug-Nuts.webp)](https://engineeringhardware.com/product/din508-standard-t-slot-nuts-lug-nuts/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [DIN508 Standard T-Slot Nuts Lug Nuts](https://engineeringhardware.com/product/din508-standard-t-slot-nuts-lug-nuts/)

T Head · DIN, ANSI, GB, JIS, GOST, BSW, OEM

**US$0.06**MOQ 100 pieces

[![Strut Channel Nut Stainless Steel Carbon Steel Spring Loaded Connection Type](https://img.engineeringhardware.com/Strut-Channel-Nut-Stainless-Steel-Carbon-Steel-Spring-Loaded-Connection-Type.webp)](https://engineeringhardware.com/product/strut-channel-nut-stainless-steel-carbon-steel-spring-loaded-connection-type/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [Strut Channel Nut Stainless Steel Carbon Steel Spring Loaded Connection Type](https://engineeringhardware.com/product/strut-channel-nut-stainless-steel-carbon-steel-spring-loaded-connection-type/)

T Head · DIN, ANSI, GB, JIS, BSW

**US$0.036 – 0.36**MOQ 10,000 pieces

[View all T-Nuts, Slot Nuts & Channel Spring Nuts →](https://engineeringhardware.com/fastener-products/nuts/t-nuts-slot-nuts-channel-spring-nuts/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Strut Channel Plain Nuts and Top Retainer Nuts for Your Application

- **Size:** Match the size to the mating part — see the dimension table below for each option.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (strut channel nuts). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Where Strut Channel Plain Nuts and Top Retainer Nuts Are Not the Right Choice

Match the fastener to the load, environment and whether the joint must be reopened; the wrong class or style is the usual cause of joint failure.

Custom manufacturing · Made to drawing

## Need a strut channel plain nuts and top retainer nuts outside the standard range?

The geometry is whatever the drawing says. A machined component has no standard to depart from, so the drawing and the tolerance scheme are the whole specification. Made by milling or stamping.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom support & bracket manufacturing](https://engineeringhardware.com/custom/supports/)[Send a drawing](https://engineeringhardware.com/custom/supports/#rfq)

## Technical Drawing

Dimensioned line drawing of plain channel nut Strut Channel Plain Nuts and Top Retainer Nuts to Trade series (strut channel nuts). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Holds itself in the channel:** no — held by hand until the bolt starts
- **Height in channel:** lowest
- **Selected for:** accessible, cost-sensitive work

## Dimensions & Specifications (Trade series (strut channel nuts))

| Form | Holds itself in the channel | Height in channel | Selected for |
| --- | --- | --- | --- |
| plain channel nut | no — held by hand until the bolt starts | lowest | accessible, cost-sensitive work |
| top retainer nut | yes — hooks the channel lips | low | overhead work without spring height |
| plain nut, serrated face | no | lowest | joints needing extra slip resistance |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What are Strut Channel Plain Nuts and Top Retainer Nuts used for?

Carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. They are supplied to Trade series (strut channel nuts).

### Which industries use Strut Channel Plain Nuts and Top Retainer Nuts?

They are commonly specified in general machine building, maintenance & repair (mro) and fabrication & metalwork, among other sectors.

### How do I choose the right size of Strut Channel Plain Nuts and Top Retainer Nuts?

Match the size to the mating part using the dimension table on this page.

### Are Strut Channel Plain Nuts and Top Retainer Nuts made to a recognized standard?

Yes — they are manufactured to Trade series (strut channel nuts), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### Can I get a quote for Strut Channel Plain Nuts and Top Retainer Nuts in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Strut Channel Plain Nuts and Top Retainer Nuts — specifications & sizes](https://engineeringhardware.com/fastener/strut-channel-plain-nuts-and-top-retainer-nuts/)

### Strut Channel Plain Nuts and Top Retainer Nuts Specification Guides

### Related Fastener Applications
