---
title: "What Are Torsion Springs Used For?"
description: "Torsion Springs (DIN 2089) are used for storing and returning mechanical energy. Catalogued 0.5 mm to 4 mm. Typical industries, sizing and material selection."
url: https://engineeringhardware.com/applications/torsion-springs/
source: Engineering Hardware & Fasteners
---

# What Are Torsion Springs Used For?

Springs · DIN 2089 · Application guide

Typical applications, the industries that specify torsion springs, and how to choose the right size, material and finish for the joint.

Torsion Springs are used for storing and returning mechanical energy. They are manufactured to DIN 2089, and selection is driven by the wire diameter, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Storing and returning mechanical energy
- **Governing standard:** DIN 2089
- **Wire diameter range:** 0.5 mm to 4 mm
- **Category:** Springs

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Torsion Springs Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/06/Torsion-Springs-—-DIN-2089.webp)

Torsion Springs (DIN 2089) are specified where the joint requires storing and returning mechanical energy. The sections below cover the typical end-uses by industry, the size and material decisions for each, assembly practice, and the applications this fastener type is not suited to. Stocked across roughly 0.5 mm to 4 mm, they cover light-duty and instrument-scale work.

## Typical Applications for Torsion Springs

The most common settings where these are specified:

- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.
- **Mechanisms & latches:** return and detent forces in moving assemblies.
- **Valves & actuators:** controlled closing or opening force.

## How to Specify Torsion Springs for Your Application

- **Size:** Select on wire diameter, and confirm it against the mating feature in the assembly. This product spans 0.5 mm–4 mm; check the full table below for the exact dimensions of each size.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to DIN 2089. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Where Torsion Springs Are Not the Right Choice

Not where a precise, repeatable force is needed without rating the spring, and avoid over-stressing beyond the rated deflection.

Custom manufacturing · Made to drawing

## Need a torsion springs outside the standard range?

Dimensions, material, finish and form are specified from the drawing — a spring outside the standard range is a variation on existing tooling rather than a new design.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom spring manufacturing](https://engineeringhardware.com/custom/springs/)[Send a drawing](https://engineeringhardware.com/custom/springs/#rfq)

## Technical Drawing

Dimensioned line drawing of 0.5 Torsion Springs to DIN 2089. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Inner diameter Di (mm):** 4.0
- **Outer diameter De (mm):** 5.0
- **Length Lo (mm):** 10
- **Coils n:** 6
- **Torque range:** 5~15Nmm
- **Material:** Spring steel

## Dimensions & Specifications (DIN 2089)

| Wire dia d (mm) | Inner diameter Di (mm) | Outer diameter De (mm) | Length Lo (mm) | Coils n | Torque range | Material | Reference standard |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 0.5 | 4.0 | 5.0 | 10 | 6 | 5~15Nmm | Spring steel | DIN 2089 |
| 0.6 | 5.0 | 6.2 | 12 | 6 | 8~25Nmm | Spring steel | DIN 2089 |
| 0.8 | 6.0 | 7.6 | 15 | 6 | 18~55Nmm | Spring steel | DIN 2089 |
| 1.0 | 8.0 | 10.0 | 18 | 6 | 35~100Nmm | Spring steel | DIN 2089 |
| 1.2 | 9.0 | 11.4 | 20 | 6 | 65~190Nmm | Spring steel | DIN 2089 |
| 1.5 | 12.0 | 15.0 | 25 | 6 | 150~420Nmm | Spring steel | DIN 2089 |
| 2.0 | 15.0 | 19.0 | 30 | 6 | 380~1100Nmm | Spring steel | DIN 2089 |
| 2.5 | 20.0 | 25.0 | 35 | 6 | 900~2500Nmm | Spring steel | DIN 2089 |
| 3.0 | 25.0 | 31.0 | 40 | 6 | 1800~5000Nmm | Spring steel | DIN 2089 |
| 4.0 | 32.0 | 40.0 | 50 | 6 | 5500~15000Nmm | Spring steel | DIN 2089 |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Which industries use Torsion Springs?

They are commonly specified in fabrication & metalwork, mechanisms & latches and valves & actuators, among other sectors.

### How do I choose the right size of Torsion Springs?

Select on wire diameter and on the fit the assembly requires. This product is available from 0.5 mm to 4 mm; the full dimension table on this page lists each size.

### How do I avoid over-stressing Torsion Springs?

Stay within the rated deflection and load. Compressing or extending a spring beyond its design limit causes permanent set or fatigue failure.

### Are Torsion Springs made to a recognized standard?

Yes — they are manufactured to DIN 2089, so dimensions are interchangeable between suppliers when you quote the standard on your order.

### Can I get a quote for Torsion Springs in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Torsion Springs — specifications & sizes](https://engineeringhardware.com/fastener/torsion-springs/)

### Torsion Springs Specification Guides

### Related Fastener Applications