---
title: "What Are Universal Beam C-Clamps Used For?"
description: "Universal Beam C-Clamps (Trade series (universal C-clamps)) are used for carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods mak…"
url: https://engineeringhardware.com/applications/universal-beam-c-clamps/
source: Engineering Hardware & Fasteners
---

# What Are Universal Beam C-Clamps Used For?

Supports, Clamps & Brackets · Trade series (universal C-clamps) · Application guide

Typical applications, the industries that specify universal beam c-clamps, and how to choose the right size, material and finish for the joint.

Universal Beam C-Clamps are used for carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. They are manufactured to Trade series (universal C-clamps), and selection is driven by the nominal size, the fit and tolerance the assembly requires, and the service environment.

- **Primary duty:** Carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing
- **Governing standard:** Trade series (universal C-clamps)
- **Category:** Supports, Clamps & Brackets

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

![What Are Universal Beam C-Clamps Used For? application image](https://engineeringhardware.com/wp-content/uploads/2026/09/Universal-Beam-C-Clamps.webp)

Universal Beam C-Clamps are selected when an assembly calls for carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. This application guide to the Trade series (universal C-clamps) type covers concrete end-uses, the specification checklist, correct installation, and where an alternative fastener performs better.

## Typical Applications for Universal Beam C-Clamps

The most common settings where these are specified:

- **General machine building:** fastening covers, brackets, motors and sub-assemblies on production equipment.
- **Maintenance & repair (MRO):** a stocked size for servicing existing plant where the original fastener spec must be matched.
- **Fabrication & metalwork:** bench and on-site assembly of steel frames, enclosures and weldments.

Product catalog

## Related Beam C-Clamps products

[![High-Quality 240-252mm Pipe Clamp for Hose and Cable Management](https://img.engineeringhardware.com/High-Quality-240-252mm-Pipe-Clamp-for-Hose-and-Cable-Management.webp)](https://engineeringhardware.com/product/high-quality-240-252mm-pipe-clamp-for-hose-and-cable-management/)

Pipe, Tube, Beam & Cable Clamps

### [High-Quality 240-252mm Pipe Clamp for Hose and Cable Management](https://engineeringhardware.com/product/high-quality-240-252mm-pipe-clamp-for-hose-and-cable-management/)

Standard · Stainless Steel

**US$6.59 – 8.99**MOQ 20 sets

[![Durable Stainless Steel Pipe Clamps for Custom Carport Assembly](https://img.engineeringhardware.com/Durable-Stainless-Steel-Pipe-Clamps-for-Custom-Carport-Assembly.webp)](https://engineeringhardware.com/product/durable-stainless-steel-pipe-clamps-for-custom-carport-assembly/)

Pipe, Tube, Beam & Cable Clamps

### [Durable Stainless Steel Pipe Clamps for Custom Carport Assembly](https://engineeringhardware.com/product/durable-stainless-steel-pipe-clamps-for-custom-carport-assembly/)

Padeye, Snap Hook, Turn Buckle Sets · Stainless Steel

**US$1.20**MOQ 100 sets

[![Heavy-Duty 4-6mm Coaxial Cable Clips with Nails for Wiring](https://img.engineeringhardware.com/Heavy-Duty-4-6mm-Coaxial-Cable-Clips-with-Nails-for-Wiring.webp)](https://engineeringhardware.com/product/heavy-duty-4-6mm-coaxial-cable-clips-with-nails-for-wiring/)

Pipe, Tube, Beam & Cable Clamps

### [Heavy-Duty 4-6mm Coaxial Cable Clips with Nails for Wiring](https://engineeringhardware.com/product/heavy-duty-4-6mm-coaxial-cable-clips-with-nails-for-wiring/)

Cable Clamp · Plastic

**US$0.0012**MOQ 100,000 pieces

[![Clamp for Hanger Pipe Clamps Inch 3/4 Clamp Saddle HDPE](https://img.engineeringhardware.com/Clamp-for-Hanger-Pipe-Clamps-Inch-3-4-Clamp-Saddle-HDPE.webp)](https://engineeringhardware.com/product/clamp-for-hanger-pipe-clamps-inch-3-4-clamp-saddle-hdpe/)

Pipe, Tube, Beam & Cable Clamps

### [Clamp for Hanger Pipe Clamps Inch 3/4 Clamp Saddle HDPE](https://engineeringhardware.com/product/clamp-for-hanger-pipe-clamps-inch-3-4-clamp-saddle-hdpe/)

Standard · Stainless Steel

**US$0.024 – 0.11**MOQ 50 pieces

[![Heavy-Duty Electro Galvanized Cast Iron Universal Beam Clamp](https://img.engineeringhardware.com/Heavy-Duty-Electro-Galvanized-Cast-Iron-Universal-Beam-Clamp.webp)](https://engineeringhardware.com/product/heavy-duty-electro-galvanized-cast-iron-universal-beam-clamp/)

Pipe, Tube, Beam & Cable Clamps

### [Heavy-Duty Electro Galvanized Cast Iron Universal Beam Clamp](https://engineeringhardware.com/product/heavy-duty-electro-galvanized-cast-iron-universal-beam-clamp/)

Standard · DIN, ASTM, GOST, GB, JIS, ANSI, BS

**US$0.012 – 6.00**MOQ 50 pieces

[![DIN 8063 Pn16 UPVC/PVC Pipe Fittings Bracket Clip Clamp](https://img.engineeringhardware.com/DIN-8063-Pn16-UPVC-PVC-Pipe-Fittings-Bracket-Clip-Clamp.webp)](https://engineeringhardware.com/product/din-8063-pn16-upvc-pvc-pipe-fittings-bracket-clip-clamp/)

Pipe, Tube, Beam & Cable Clamps

### [DIN 8063 Pn16 UPVC/PVC Pipe Fittings Bracket Clip Clamp](https://engineeringhardware.com/product/din-8063-pn16-upvc-pvc-pipe-fittings-bracket-clip-clamp/)

PVC · Thermoplastics Pipes

**US$2.39**MOQ 1 piece

[View all Pipe, Tube, Beam & Cable Clamps →](https://engineeringhardware.com/fastener-products/clamps-clips-cable-ties/pipe-tube-beam-cable-clamps/) [Full product catalog](https://engineeringhardware.com/products/)

## How to Specify Universal Beam C-Clamps for Your Application

- **Size:** Match the size to the mating part — see the dimension table below for each option.
- **Material:** Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
- **Environment:** For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- **Standard:** This product is supplied to Trade series (universal C-clamps). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

## Where Universal Beam C-Clamps Are Not the Right Choice

Match the fastener to the load, environment and whether the joint must be reopened; the wrong class or style is the usual cause of joint failure.

Custom manufacturing · Made to drawing

## Need a universal beam c-clamps outside the standard range?

With no standard to depart from, the tolerance scheme is the specification — which dimensions are critical, and which are simply nominal. Made by milling or stamping.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom support & bracket manufacturing](https://engineeringhardware.com/custom/supports/)[Send a drawing](https://engineeringhardware.com/custom/supports/#rfq)

## Technical Drawing

Dimensioned line drawing of set screw onto the flange Universal Beam C-Clamps to Trade series (universal C-clamps). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Rod connection:** threaded rod through the body
- **Governed by:** beam flange thickness
- **Structural modification:** none

## Dimensions & Specifications (Trade series (universal C-clamps))

| Fixing | Rod connection | Governed by | Structural modification |
| --- | --- | --- | --- |
| set screw onto the flange | threaded rod through the body | beam flange thickness | none |
| set screw onto the flange | threaded rod through the body | beam flange thickness | none |

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What are Universal Beam C-Clamps used for?

Carrying or reinforcing a run of pipe, tray or rail, with separate bolts or rods making the final fixing. They are supplied to Trade series (universal C-clamps).

### Which industries use Universal Beam C-Clamps?

They are commonly specified in general machine building, maintenance & repair (mro) and fabrication & metalwork, among other sectors.

### How do I choose the right size of Universal Beam C-Clamps?

Match the size to the mating part using the dimension table on this page.

### Are Universal Beam C-Clamps made to a recognized standard?

Yes — they are manufactured to Trade series (universal C-clamps), so dimensions are interchangeable between suppliers when you quote the standard on your order.

### Can I get a quote for Universal Beam C-Clamps in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.

## Related Pages

Product page: [Universal Beam C-Clamps — specifications & sizes](https://engineeringhardware.com/fastener/universal-beam-c-clamps/)

### Universal Beam C-Clamps Specification Guides

### Related Fastener Applications