2 catalogued sizes, dimensioned to Trade series (C-clamps with locking nut). Pick any row and the technical drawing redraws to it.
Beam C-Clamps with Set Screw and Lock Nut to Trade series (C-clamps with locking nut): the full dimensional table is reproduced below. 2 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
Trade series (C-clamps with locking nut)
Catalogued sizes
2
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Beam C-Clamps with Set Screw and Lock Nut — Trade series (C-clamps with locking nut)
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Beam C-Clamps with Set Screw and Lock Nut
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (Trade series (C-clamps with locking nut))
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Fixing
Set screw retention
Selected for
Structural modification
set screw onto the flange
lock nut on the set screw
vibration-exposed runs
none
set screw onto the flange
lock nut plus retaining strap
overhead and safety-critical runs
none
Manufactured to Trade series (C-clamps with locking nut), Beam C-Clamps with Set Screw and Lock Nut are supports, clamps & brackets supplied by Engineering Hardware. The dimensional data, materials and selection notes are summarized here.
What Are Beam C-Clamps with Set Screw and Lock Nut?
Beam C-Clamps with Set Screw and Lock Nut are supports, clamps & brackets defined by Trade series (C-clamps with locking nut). They are selected by nominal size and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.
Goes With
Hardware commonly specified alongside Beam C-Clamps with Set Screw and Lock Nut.
Pricing
Beam C-Clamps with Set Screw and Lock Nut are supplied to order. Pricing starts from approximately US$0.95 per piece for standard configurations in the material called out on the drawing; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Beam C-Clamps with Set Screw and Lock Nut — Trade series (C-clamps with locking nut)
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What is the controlling standard for Beam C-Clamps with Set Screw and Lock Nut?
Beam C-Clamps with Set Screw and Lock Nut are manufactured to Trade series (C-clamps with locking nut). The dimensional values on this page follow that standard.
Which sizes of Beam C-Clamps with Set Screw and Lock Nut does Engineering Hardware supply?
The table on this page lists 2 sizes for Beam C-Clamps with Set Screw and Lock Nut, ranging from set screw onto the flange to set screw onto the flange. Sizes outside the table can be quoted on request.
In which materials are Beam C-Clamps with Set Screw and Lock Nut supplied?
Beam C-Clamps with Set Screw and Lock Nut are supplied in the material specified on the part drawing, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Beam C-Clamps with Set Screw and Lock Nut.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
