---
title: "Headed Concrete Anchor and Shear Connector Studs"
description: "Headed Concrete Anchor and Shear Connector Studs to Trade series (headed shear connector studs): full dimensional table. Technical drawing redraws to any row."
url: https://engineeringhardware.com/fastener/headed-concrete-anchor-and-shear-connector-studs/
source: Engineering Hardware & Fasteners
---

# Headed Concrete Anchor and Shear Connector Studs

Anchors & Concrete Fixings · Shear Connector Studs

2 catalogued sizes, dimensioned to Trade series (headed shear connector studs). Pick any row and the technical drawing redraws to it.

Headed Concrete Anchor and Shear Connector Studs to Trade series (headed shear connector studs): the full dimensional table is reproduced below. 2 sizes are held in the table below, and the technical drawing redraws to whichever row you select.

- **Standard:** Trade series (headed shear connector studs)
- **Catalogued sizes:** 2

Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.

![Headed Concrete Anchor and Shear Connector Studs technical product image](https://engineeringhardware.com/wp-content/uploads/2026/09/Headed-Concrete-Anchor-and-Shear-Connector-Studs.webp)

Product catalog

## Related Shear Connector Studs products

[![Factory Supply Hand Industrial M2 M4 Aluminum It Type Internal Thread Weld Stud](https://img.engineeringhardware.com/Factory-Supply-Hand-Industrial-M2-M4-Aluminum-It-Type-Internal-Thread-Weld-Stud.webp)](https://engineeringhardware.com/product/factory-supply-hand-industrial-m2-m4-aluminum-it-type-internal-thread-weld-stud/)

Weld & Shear Studs

### [Factory Supply Hand Industrial M2 M4 Aluminum It Type Internal Thread Weld Stud](https://engineeringhardware.com/product/factory-supply-hand-industrial-m2-m4-aluminum-it-type-internal-thread-weld-stud/)

Aluminum · M3 M4 M5 M6 M8

**US$0.036 – 0.12**MOQ 2,000 pieces

[![Iking High-Strength Corrugated Metal Decking Sheet for Permanent Formwork in Composite Floor Systems with Integrated Shear Studs and Galvanized Coating](https://img.engineeringhardware.com/Iking-High-Strength-Corrugated-Metal-Decking-Sheet-for-Permanent-Formwork-in-Composite-Floor-Systems-with-Integrated-Shear-Studs-and-Galvanized-Coating.webp)](https://engineeringhardware.com/product/iking-high-strength-corrugated-metal-decking-sheet-for-permanent-formwork-in/)

Weld & Shear Studs

### [Iking High-Strength Corrugated Metal Decking Sheet for Permanent Formwork in Composite Floor Systems with Integrated Shear Studs and Galvanized Coating](https://engineeringhardware.com/product/iking-high-strength-corrugated-metal-decking-sheet-for-permanent-formwork-in/)

Steel · Anti-Corrosion, Easy To Install, High Intensity

**US$7.20**MOQ 5,000 meters

[![Hot Sale Good Quality M6 M8 Carbon Steel External Thread PT Type Weld Stud](https://img.engineeringhardware.com/Hot-Sale-Good-Quality-M6-M8-Carbon-Steel-External-Thread-PT-Type-Weld-Stud-2.webp)](https://engineeringhardware.com/product/hot-sale-good-quality-m6-m8-carbon-steel-external-thread-pt-type-weld-stud-2/)

Weld & Shear Studs

### [Hot Sale Good Quality M6 M8 Carbon Steel External Thread PT Type Weld Stud](https://engineeringhardware.com/product/hot-sale-good-quality-m6-m8-carbon-steel-external-thread-pt-type-weld-stud-2/)

Headless/Spotless · DIN, ANSI, GB, JIS, BSW, GOST

**US$0.012 – 1.20**MOQ 1,000 pieces

[![Weld Stud DIN 32501 Steel Copper Plating](https://img.engineeringhardware.com/Weld-Stud-DIN-32501-Steel-Copper-Plating.webp)](https://engineeringhardware.com/product/weld-stud-din-32501-steel-copper-plating/)

Weld & Shear Studs

### [Weld Stud DIN 32501 Steel Copper Plating](https://engineeringhardware.com/product/weld-stud-din-32501-steel-copper-plating/)

Hexagon Head · DIN, ANSI, GB, JIS, BSW, Accept Non-Standard

**US$0.30 – 0.60**MOQ 10,000 pieces

[![Premium Customized Mild Steel External Threaded Weld Studs for Industrial Use](https://img.engineeringhardware.com/Premium-Customized-Mild-Steel-External-Threaded-Weld-Studs-for-Industrial-Use.webp)](https://engineeringhardware.com/product/premium-customized-mild-steel-external-threaded-weld-studs-for-industrial-use/)

Weld & Shear Studs

### [Premium Customized Mild Steel External Threaded Weld Studs for Industrial Use](https://engineeringhardware.com/product/premium-customized-mild-steel-external-threaded-weld-studs-for-industrial-use/)

Carbon Steel,Brass,Stainless Steel,Aluminum,etc · A

**US$0.12 – 0.90**MOQ 1,000 pieces

[![Stainless Steel Weld Stud Bolt, B-Type No Step Spot Weld Screw for Sheet Metal](https://img.engineeringhardware.com/Stainless-Steel-Weld-Stud-Bolt-B-Type-No-Step-Spot-Weld-Screw-for-Sheet-Metal.webp)](https://engineeringhardware.com/product/stainless-steel-weld-stud-bolt-b-type-no-step-spot-weld-screw-for-sheet-metal/)

Weld & Shear Studs

### [Stainless Steel Weld Stud Bolt, B-Type No Step Spot Weld Screw for Sheet Metal](https://engineeringhardware.com/product/stainless-steel-weld-stud-bolt-b-type-no-step-spot-weld-screw-for-sheet-metal/)

Weld Stud / Stud Bolt · DIN, GB

**US$0.0504 – 0.084**MOQ 500 pieces

[View all Weld & Shear Studs →](https://engineeringhardware.com/fastener-products/threaded-rods-studs/weld-shear-studs/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

What Headed Concrete Anchor and Shear Connector Studs are specified for, industry by industry.

### Industries that specify Headed Concrete Anchor and Shear Connector Studs

- **Structural steel:** Drawn-arc stud welding.
- **Precast connections:** Anchorage into concrete.
- **Composite construction:** Bonds steel beam to concrete slab.
- **Bridge decks:** Shear transfer at the interface.
- **Plant installation:** Machines and equipment held down to a concrete floor.
- **Fit-out & drylining:** Fixings into board, block and hollow wall.

### Typical applications

- bend-testing production samples
- checking ceramic ferrules are dry before use
- ordering by length after weld
- welding to clean, dry, unpainted steel
- fixing a steel fixture through to a solid substrate
- suspended services on threaded rod

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **The concrete governs:** Capacity is a property of the base material and the geometry — grade, edge distance, spacing and cracked or uncracked — not of the anchor alone. Work to the anchor manufacturer's ETA or ICC-ES report.
- **Hole preparation:** Drilled diameter, depth and cleanliness are part of the specification; an uncleaned hole is the single most common cause of a failed anchor.

### Where to use something else

- Do not order shear studs by pre-weld length; the arc burns off a known amount and the studs arrive short.
- Not for a substrate the type is not qualified in — an expansion anchor near an edge or in hollow block will split it.

[Full application guide: where Headed Concrete Anchor and Shear Connector Studs are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/headed-concrete-anchor-and-shear-connector-studs/)

## Technical Drawing

Dimensioned line drawing of drawn-arc stud welding Headed Concrete Anchor and Shear Connector Studs to Trade series (headed shear connector studs). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Length quoted:** after weld
- **Head:** upset head
- **Function:** composite action between beam and slab

## Dimensions & Specifications (Trade series (headed shear connector studs))

Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.

| Attachment | Length quoted | Head | Function |
| --- | --- | --- | --- |
| drawn-arc stud welding | after weld | upset head | composite action between beam and slab |
| drawn-arc stud welding | after weld | upset head | anchorage into concrete |

Headed Concrete Anchor and Shear Connector Studs conform to Trade series (headed shear connector studs). As anchors & concrete fixings, they are specified by the dimensions in the table below; this page also covers materials, finishes and typical uses.

## What Are Headed Concrete Anchor and Shear Connector Studs?

Headed Concrete Anchor and Shear Connector Studs are anchors & concrete fixings defined by Trade series (headed shear connector studs). They are selected by size designation and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.

## Materials & Finishes

Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.

## Specification Guides

Each size, material and standard of Headed Concrete Anchor and Shear Connector Studs has its own reference page with the figures for that one configuration.

## Goes With

Hardware commonly specified alongside Headed Concrete Anchor and Shear Connector Studs.

## Pricing

Headed Concrete Anchor and Shear Connector Studs are supplied to order. Pricing starts from approximately US$0.40 per piece for standard sizes in carbon steel; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.

Custom manufacturing · Made to drawing

## Need a headed concrete anchor and shear connector studs outside the standard range?

Embedment depth, thread size, body length and corrosion protection are the variables; capacity remains a concrete design value, not a property of the anchor alone. Made by hot forging or thread rolling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom anchor & concrete fixing manufacturing](https://engineeringhardware.com/custom/anchors/)[Send a drawing](https://engineeringhardware.com/custom/anchors/#rfq)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Which standard governs Headed Concrete Anchor and Shear Connector Studs?

Headed Concrete Anchor and Shear Connector Studs are manufactured to Trade series (headed shear connector studs). The dimensional values on this page follow that standard.

### What sizes are available for Headed Concrete Anchor and Shear Connector Studs?

The table on this page lists 2 sizes for Headed Concrete Anchor and Shear Connector Studs, ranging from drawn-arc stud welding to drawn-arc stud welding. Sizes outside the table can be quoted on request.

### In which materials are Headed Concrete Anchor and Shear Connector Studs supplied?

Headed Concrete Anchor and Shear Connector Studs are supplied in the material specified on the part drawing, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Headed Concrete Anchor and Shear Connector Studs.

### How do I request a quotation?

Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.