---
title: "Push-Barb Cable Tie Mounts"
description: "Push-Barb Cable Tie Mounts to Trade series (push-in barbed tie mounts): full dimensional table. 3 catalogued sizes with materials and finishes."
url: https://engineeringhardware.com/fastener/push-barb-cable-tie-mounts/
source: Engineering Hardware & Fasteners
---

# Push-Barb Cable Tie Mounts

Cable & Cord Management · Cable Tie Mounts

3 catalogued sizes, dimensioned to Trade series (push-in barbed tie mounts). Pick any row and the technical drawing redraws to it.

Push-Barb Cable Tie Mounts to Trade series (push-in barbed tie mounts): the full dimensional table is reproduced below. 3 sizes are held in the table below, and the technical drawing redraws to whichever row you select.

- **Standard:** Trade series (push-in barbed tie mounts)
- **Catalogued sizes:** 3

Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.

![Push-Barb Cable Tie Mounts technical product image](https://engineeringhardware.com/wp-content/uploads/2026/09/Push-Barb-Cable-Tie-Mounts.webp)

Product catalog

## Related Cable Tie Mounts products

[![Carbon Steel Zinc Plated M8+M10 EPDM Rubber Pipe Clamp](https://img.engineeringhardware.com/Carbon-Steel-Zinc-Plated-M8-M10-EPDM-Rubber-Pipe-Clamp.webp)](https://engineeringhardware.com/product/carbon-steel-zinc-plated-m8-m10-epdm-rubber-pipe-clamp/)

Pipe, Tube, Beam & Cable Clamps

### [Carbon Steel Zinc Plated M8+M10 EPDM Rubber Pipe Clamp](https://engineeringhardware.com/product/carbon-steel-zinc-plated-m8-m10-epdm-rubber-pipe-clamp/)

Square Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.12 – 1.04**MOQ 1,000 pieces

[![Galvanized Rubber Lined Pipe Clamp EPDM Cushion Pipe Clip for Water Gas Pipeline Fixing](https://img.engineeringhardware.com/Galvanized-Rubber-Lined-Pipe-Clamp-EPDM-Cushion-Pipe-Clip-for-Water-Gas-Pipeline-Fixing.webp)](https://engineeringhardware.com/product/galvanized-rubber-lined-pipe-clamp-epdm-cushion-pipe-clip-for-water-gas-pipeline/)

Pipe, Tube, Beam & Cable Clamps

### [Galvanized Rubber Lined Pipe Clamp EPDM Cushion Pipe Clip for Water Gas Pipeline Fixing](https://engineeringhardware.com/product/galvanized-rubber-lined-pipe-clamp-epdm-cushion-pipe-clip-for-water-gas-pipeline/)

Standard · Stainless Steel

**US$0.19 – 0.24**MOQ 500 pieces

[![Weather Resistance Plastic Single Cable Clamp for Cable Tray](https://img.engineeringhardware.com/Weather-Resistance-Plastic-Single-Cable-Clamp-for-Cable-Tray.webp)](https://engineeringhardware.com/product/weather-resistance-plastic-single-cable-clamp-for-cable-tray/)

Pipe, Tube, Beam & Cable Clamps

### [Weather Resistance Plastic Single Cable Clamp for Cable Tray](https://engineeringhardware.com/product/weather-resistance-plastic-single-cable-clamp-for-cable-tray/)

U Type · Plastic

**US$1.80 – 18.00**MOQ 10 pieces

[![CNC Machined Custom Magnesium Alloy Automotive Steering Tube Clamp](https://img.engineeringhardware.com/CNC-Machined-Custom-Magnesium-Alloy-Automotive-Steering-Tube-Clamp.webp)](https://engineeringhardware.com/product/cnc-machined-custom-magnesium-alloy-automotive-steering-tube-clamp/)

Pipe, Tube, Beam & Cable Clamps

### [CNC Machined Custom Magnesium Alloy Automotive Steering Tube Clamp](https://engineeringhardware.com/product/cnc-machined-custom-magnesium-alloy-automotive-steering-tube-clamp/)

Broaching, Drilling, Etching / Chemical Machining · GB, EN, China GB C…

**US$0.25 – 7.33**MOQ 1 piece

[![Factory Supply Galvanized Pipe Clamp Pipe Clip with Pipe Hoop Double Bolt Design for Industrial Pipeline Fixing](https://img.engineeringhardware.com/Factory-Supply-Galvanized-Pipe-Clamp-Pipe-Clip-with-Pipe-Hoop-Double-Bolt-Design-for-Industrial-Pipeline-Fixing.webp)](https://engineeringhardware.com/product/factory-supply-galvanized-pipe-clamp-pipe-clip-with-pipe-hoop-double-bolt-design-for/)

Pipe, Tube, Beam & Cable Clamps

### [Factory Supply Galvanized Pipe Clamp Pipe Clip with Pipe Hoop Double Bolt Design for Industrial Pipeline Fixing](https://engineeringhardware.com/product/factory-supply-galvanized-pipe-clamp-pipe-clip-with-pipe-hoop-double-bolt-design-for/)

Link Fittings · GB

**US$2.40 – 3.60**MOQ 500 sets

[![Hot Sale K-4 Metal Joint Lean Manufacture Pipe Clamp Joints](https://img.engineeringhardware.com/Hot-Sale-K-4-Metal-Joint-Lean-Manufacture-Pipe-Clamp-Joints.webp)](https://engineeringhardware.com/product/hot-sale-k-4-metal-joint-lean-manufacture-pipe-clamp-joints/)

Pipe, Tube, Beam & Cable Clamps

### [Hot Sale K-4 Metal Joint Lean Manufacture Pipe Clamp Joints](https://engineeringhardware.com/product/hot-sale-k-4-metal-joint-lean-manufacture-pipe-clamp-joints/)

Accessory · SPCC

**Price on request**MOQ 300 pieces

[View all Pipe, Tube, Beam & Cable Clamps →](https://engineeringhardware.com/fastener-products/clamps-clips-cable-ties/pipe-tube-beam-cable-clamps/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

The sectors that buy Push-Barb Cable Tie Mounts, and the duty each one buys them for. Stocked from barbed push-in stem to arrowhead push-in stem (nominal size).

### Industries that specify Push-Barb Cable Tie Mounts

- **Appliance manufacture:** Fast assembly-line cable routing.
- **Sheet-metal enclosures:** No screw and no tool.
- **High-volume build:** Consistent cycle time per fixing.
- **Automotive assembly:** One-hand fixing with no rear access.
- **Maintenance & MRO:** Replacement of a component matched to an existing drawing.
- **Machine building & OEM:** Made-to-drawing parts used inside a specific assembly.

### Typical applications

- checking panel thickness against the barb range
- pushing until the barbs are fully through the sheet
- treating the mount as single use
- matching the panel hole diameter exactly
- a function defined by the part drawing rather than by a catalog standard

### Where to use something else

- Do not force a push mount into an oversize hole; the barbs never engage and the mount falls out under vibration.

[Full application guide: where Push-Barb Cable Tie Mounts are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/push-barb-cable-tie-mounts/)

## Technical Drawing

Dimensioned line drawing of barbed push-in stem Push-Barb Cable Tie Mounts to Trade series (push-in barbed tie mounts). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Panel access needed:** front only
- **Selected by:** panel hole diameter and panel thickness
- **Reusable:** no

## Dimensions & Specifications (Trade series (push-in barbed tie mounts))

Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.

| Fixing | Panel access needed | Selected by | Reusable |
| --- | --- | --- | --- |
| barbed push-in stem | front only | panel hole diameter and panel thickness | no |
| barbed push-in stem with disc | front only | panel hole diameter and panel thickness | no |
| arrowhead push-in stem | front only | panel hole diameter and panel thickness | no |

Push-Barb Cable Tie Mounts are cable & cord management manufactured to Trade series (push-in barbed tie mounts). This page lists the full dimensional range with the key specifications engineers need to select and specify them.

## What Are Push-Barb Cable Tie Mounts?

Push-Barb Cable Tie Mounts are cable & cord management defined by Trade series (push-in barbed tie mounts). They are selected by nominal size and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.

## Materials & Finishes

Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.

## Goes With

Hardware commonly specified alongside Push-Barb Cable Tie Mounts.

## Pricing

Push-Barb Cable Tie Mounts are supplied to order. Pricing starts from approximately US$0.050 per piece for standard configurations in the material called out on the drawing; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.

Custom manufacturing · Made to drawing

## Need a push-barb cable tie mounts outside the standard range?

The geometry is whatever the drawing says. A machined component has no standard to depart from, so the drawing and the tolerance scheme are the whole specification.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom cable management manufacturing](https://engineeringhardware.com/custom/cable-management/)[Send a drawing](https://engineeringhardware.com/custom/cable-management/#rfq)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What standard are Push-Barb Cable Tie Mounts manufactured to?

Push-Barb Cable Tie Mounts are manufactured to Trade series (push-in barbed tie mounts). The dimensional values on this page follow that standard.

### What sizes are available for Push-Barb Cable Tie Mounts?

The table on this page lists 3 sizes for Push-Barb Cable Tie Mounts, ranging from barbed push-in stem to arrowhead push-in stem. Sizes outside the table can be quoted on request.

### In which materials are Push-Barb Cable Tie Mounts supplied?

Push-Barb Cable Tie Mounts are supplied in the material specified on the part drawing, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Push-Barb Cable Tie Mounts.

### How do I request a quotation?

Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.