A2 Stainless Steel Internally Threaded Dowel Pin

A2 Stainless Steel Internally Threaded Dowel Pin are stocked to GB/T 120.1 / ISO 8735. The grade provides good general corrosion resistance and is largely non-magnetic; the practical service range is approx. -200 °C to +400 °C. Property data, grade comparison and the full size table follow.

Why Choose A2 Stainless Steel for Internally Threaded Dowel Pin — GB/T 120.1 / ISO 8735 (Series 099)

The most common stainless grade for indoor and general outdoor fasteners. For internally threaded dowel pin — gb/t 120.1 / iso 8735 (series 099), this matters when good general corrosion resistance is the primary requirement.

Mechanical & Physical Properties

Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Internally Threaded Dowel Pin — GB/T 120.1 / ISO 8735 (Series 099) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

Galvanic & Galling Considerations

Two important notes for stainless internally threaded dowel pin — gb/t 120.1 / iso 8735 (series 099): (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.

Sizes of Internally Threaded Dowel Pin — GB/T 120.1 / ISO 8735 (Series 099) Available in A2 Stainless Steel