---
title: "A2 (304) Stainless Steel Concrete Screw Anchors"
description: "A2 (304) Stainless Steel Concrete Screw Anchors (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70): good general corrosion resistance."
url: https://engineeringhardware.com/guide/material/a2-stainless-steel-concrete-screw-anchors/
source: Engineering Hardware & Fasteners
---

# A2 (304) Stainless Steel Concrete Screw Anchors

Anchors & Concrete Fixings · Trade series (HUS4)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A2 Stainless Steel Concrete Screw Anchors are supplied to ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70. Corrosion behaviour is good general corrosion resistance, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is the most common stainless group for indoor and general outdoor fasteners.

- **Grade:** ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
- **Corrosion resistance:** Good general corrosion resistance
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A2 (304) Stainless Steel Concrete Screw Anchors reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Hilti-HUS4-Concrete-Screw-Anchors.webp)

Material page for concrete screw anchors in A2 Stainless Steel (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70). The sizes below are the ones we supply; there is no published dimensional standard for this article, so the table rather than a standard number is what to quote. Corrosion behaviour is good general corrosion resistance and the service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

## Why Choose A2 Stainless Steel for Concrete Screw Anchors

The most common stainless group for indoor and general outdoor fasteners. For concrete screw anchors, this matters when good general corrosion resistance is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Good general corrosion resistance |

## Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Concrete Screw Anchors in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

## Comparable Grades

For Concrete Screw Anchors, the alternative stainless grade is A4 (316). Choose A2 (304) for general use and A4 (316) wherever chlorides are present; the molybdenum in A4 is the whole difference. Remember that stainless is the corrosion answer, not the strength answer — for load, look at class 8.8 or 10.9 instead.

## Using Stainless Fasteners in Aluminum

The galvanic couple here runs the wrong way: aluminum is the less noble metal, so it corrodes and the fastener does not. What governs the rate is the ratio of areas — a large anode and a small cathode is a tolerable combination, the reverse concentrates the attack into thin material around the hole. An isolating washer plus sealant breaks the circuit; where that is impractical, match the fastener to the substrate.

## Sizes of Concrete Screw Anchors Available in A2 Stainless Steel

| Anchor diameter (mm) | Drill hole diameter (mm) | Embedment depth (mm) | Minimum spacing options (mm) | Minimum edge-distance options (mm) | Head options |
| --- | --- | --- | --- | --- | --- |
| 8 | 8 | 85 / 90 / 100 / 110 / 115 / 130 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 10 | 10 | 85 / 90 / 100 / 110 / 115 / 130 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 12 | 12 | 85 / 90 / 100 / 110 / 115 / 130 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 14 | 14 | 85 / 90 / 100 / 110 / 115 / 130 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 16 | 16 | 85 / 90 / 100 / 110 / 115 / 130 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |

Dimensions are independent of the material: the table above lists the sizes supplied, and on this page every one of them is quoted in A2 Stainless Steel. The catalogue's default material column has been omitted here so it cannot be read as contradicting that.

Custom manufacturing · Made to drawing

## Need this anchor & concrete fixing in a grade that is not listed?

A2 Stainless Steel is one of the grades the catalog describes. Length and corrosion protection are the usual specials. The load a fixing will take is decided by the concrete and the edge distance, not by ordering a longer anchor. Made by hot forging or thread rolling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom anchor & concrete fixing manufacturing](https://engineeringhardware.com/custom/anchors/)[Send a drawing](https://engineeringhardware.com/custom/anchors/#rfq)

## Technical Drawing

Dimensioned line drawing of 8 Concrete Screw Anchors to Trade series (HUS4). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Drill hole diameter (mm):** 8
- **Embedment depth (mm):** 85 / 90 / 100 / 110 / 115 / 130
- **Minimum base-material thickness options (mm):** 140 / 160 / 195 / 200
- **Minimum spacing options (mm):** 40 / 50 / 60 / 90
- **Minimum edge-distance options (mm):** 40 / 50 / 60 / 65
- **Head options:** hex-head / washer-head

## Dimensions & Specifications (Trade series (HUS4))

| Anchor diameter (mm) | Drill hole diameter (mm) | Embedment depth (mm) | Minimum base-material thickness options (mm) | Minimum spacing options (mm) | Minimum edge-distance options (mm) | Head options |
| --- | --- | --- | --- | --- | --- | --- |
| 8 | 8 | 85 / 90 / 100 / 110 / 115 / 130 | 140 / 160 / 195 / 200 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 10 | 10 | 85 / 90 / 100 / 110 / 115 / 130 | 140 / 160 / 195 / 200 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 12 | 12 | 85 / 90 / 100 / 110 / 115 / 130 | 140 / 160 / 195 / 200 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 14 | 14 | 85 / 90 / 100 / 110 / 115 / 130 | 140 / 160 / 195 / 200 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |
| 16 | 16 | 85 / 90 / 100 / 110 / 115 / 130 | 140 / 160 / 195 / 200 | 40 / 50 / 60 / 90 | 40 / 50 / 60 / 65 | hex-head / washer-head |

Product catalog

## Related Concrete Screw Anchors products

[![Stainless Steel 12mm Concrete Expansion Anchor Bolt with Hex Nut Washer](https://img.engineeringhardware.com/Stainless-Steel-12mm-Concrete-Expansion-Anchor-Bolt-with-Hex-Nut-Washer.webp)](https://engineeringhardware.com/product/stainless-steel-12mm-concrete-expansion-anchor-bolt-with-hex-nut-washer/)

Screw, Concrete & Masonry Anchors

### [Stainless Steel 12mm Concrete Expansion Anchor Bolt with Hex Nut Washer](https://engineeringhardware.com/product/stainless-steel-12mm-concrete-expansion-anchor-bolt-with-hex-nut-washer/)

Round Head · DIN

**US$0.012**MOQ 1,000 pieces

[![Torx Concrete Screw White Blue Zinc Plated Self Tapping Masonry Fixing Screw](https://img.engineeringhardware.com/Torx-Concrete-Screw-White-Blue-Zinc-Plated-Self-Tapping-Masonry-Fixing-Screw.webp)](https://engineeringhardware.com/product/torx-concrete-screw-white-blue-zinc-plated-self-tapping-masonry-fixing-screw/)

Screw, Concrete & Masonry Anchors

### [Torx Concrete Screw White Blue Zinc Plated Self Tapping Masonry Fixing Screw](https://engineeringhardware.com/product/torx-concrete-screw-white-blue-zinc-plated-self-tapping-masonry-fixing-screw/)

Concrete Screw Anchor · Carbon Steel

**US$0.30 – 0.60**MOQ 1,000 pieces

[![Hot Dipped Galvanized L/J Type Anchor Bolt Holding Down Bolt for Building Foundation](https://img.engineeringhardware.com/Hot-Dipped-Galvanized-L-J-Type-Anchor-Bolt-Holding-Down-Bolt-for-Building-Foundation.webp)](https://engineeringhardware.com/product/hot-dipped-galvanized-l-j-type-anchor-bolt-holding-down-bolt-for-building-foundation/)

Screw, Concrete & Masonry Anchors

### [Hot Dipped Galvanized L/J Type Anchor Bolt Holding Down Bolt for Building Foundation](https://engineeringhardware.com/product/hot-dipped-galvanized-l-j-type-anchor-bolt-holding-down-bolt-for-building-foundation/)

Concrete Anchor · ANSI, BSW, DIN, GB, GOST, JIS

**US$1.80**MOQ 1,000 pieces

[![Inch Hexagonal Expanded Screw/ Expansion Anchor Bolts](https://img.engineeringhardware.com/Inch-Hexagonal-Expanded-Screw-Expansion-Anchor-Bolts.webp)](https://engineeringhardware.com/product/inch-hexagonal-expanded-screw-expansion-anchor-bolts/)

Screw, Concrete & Masonry Anchors

### [Inch Hexagonal Expanded Screw/ Expansion Anchor Bolts](https://engineeringhardware.com/product/inch-hexagonal-expanded-screw-expansion-anchor-bolts/)

Hexagon Head With Flange · Stainless Steel

**US$0.0012 – 0.12**MOQ 20,000 pieces

[![HDG Anchor Bolt Carbon Steel Foundation Bolt](https://img.engineeringhardware.com/HDG-Anchor-Bolt-Carbon-Steel-Foundation-Bolt.webp)](https://engineeringhardware.com/product/hdg-anchor-bolt-carbon-steel-foundation-bolt/)

Screw, Concrete & Masonry Anchors

### [HDG Anchor Bolt Carbon Steel Foundation Bolt](https://engineeringhardware.com/product/hdg-anchor-bolt-carbon-steel-foundation-bolt/)

Concrete Anchor · ANSI, BSW, DIN, GB, GOST, JIS

**US$1.80**MOQ 1,000 pieces

[![Carbon Steel Wedge Bolt for Construction Site Fastening](https://img.engineeringhardware.com/Carbon-Steel-Wedge-Bolt-for-Construction-Site-Fastening.webp)](https://engineeringhardware.com/product/carbon-steel-wedge-bolt-for-construction-site-fastening/)

Screw, Concrete & Masonry Anchors

### [Carbon Steel Wedge Bolt for Construction Site Fastening](https://engineeringhardware.com/product/carbon-steel-wedge-bolt-for-construction-site-fastening/)

Concrete Screw Anchor · Alloy Steel

**US$1.20 – 12.00**MOQ 1,000 pieces

[View all Screw, Concrete & Masonry Anchors →](https://engineeringhardware.com/fastener-products/anchors-construction-fixings/screw-concrete-masonry-anchors/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

The sectors that buy Concrete Screw Anchors, and the duty each one buys them for. Stocked from 8 to 16 (nominal diameter).

### Industries that specify Concrete Screw Anchors

- **Window and door installation:** Frames attached to concrete or masonry reveals with a removable screw anchor.
- **Temporary works:** Formwork rails, guards and fixtures installed and removed without an expansion sleeve.
- **Equipment support:** Light and medium brackets anchored to a concrete slab.
- **Electrical services:** Conduit, tray and support brackets fixed directly to concrete.
- **Building services:** Suspending tray, duct, pipe and sprinkler runs from a soffit.
- **Plant installation:** Machines and equipment held down to a concrete floor.

### Typical applications

- installing a removable fixing without a separate expansion plug
- matching drill diameter and embedment to the selected HUS4 configuration
- checking edge distance, spacing and concrete condition against the approval
- cutting a mating thread directly into a prepared concrete hole
- fixing a steel fixture through to a solid substrate
- suspended services on threaded rod

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Hole preparation:** Drilled diameter, depth and cleanliness are part of the specification; an uncleaned hole is the single most common cause of a failed anchor.
- **The concrete governs:** Capacity is a property of the base material and the geometry — grade, edge distance, spacing and cracked or uncracked — not of the anchor alone. Work to the anchor manufacturer's ETA or ICC-ES report.

### Where to use something else

- Do not replace the approved drill and embedment values with a generic masonry-screw rule.
- Not for a substrate the type is not qualified in — an expansion anchor near an edge or in hollow block will split it.

[Full application guide: where Concrete Screw Anchors are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/concrete-screw-anchors/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Are A2 Stainless Steel Concrete Screw Anchors magnetic?

A2 Stainless Steel Concrete Screw Anchors are largely non-magnetic.

### What corrosion resistance do A2 Stainless Steel Concrete Screw Anchors offer?

A2 Stainless Steel Concrete Screw Anchors provide good general corrosion resistance with a service range of approx. -200 °C to +400 °C, subject to the property class and the joint.

### Should I choose A2 Stainless Steel or A4 (316) for Concrete Screw Anchors?

For Concrete Screw Anchors, A2 Stainless Steel suits general indoor and outdoor use; A4 (316) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.

### Can A2 Stainless Steel Concrete Screw Anchors gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Concrete Screw Anchors page](https://engineeringhardware.com/fastener/concrete-screw-anchors/)

### More Concrete Screw Anchors Guides