---
title: "A2 (304) Stainless Steel Drywall Screws (Bugle Head)"
description: "A2 (304) Stainless Steel Drywall Screws (Bugle Head) (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70): good general corrosion resistance."
url: https://engineeringhardware.com/guide/material/a2-stainless-steel-drywall-screws/
source: Engineering Hardware & Fasteners
---

# A2 (304) Stainless Steel Drywall Screws (Bugle Head)

Screws · DIN 18182-2

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A2 Stainless Steel Drywall Screws (Bugle Head) are supplied to ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70. Corrosion behaviour is good general corrosion resistance, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is the most common stainless group for indoor and general outdoor fasteners.

- **Grade:** ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
- **Corrosion resistance:** Good general corrosion resistance
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A2 (304) Stainless Steel Drywall Screws (Bugle Head) reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Drywall-Screws.webp)

A2 Stainless Steel (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70) is the most common stainless group for indoor and general outdoor fasteners. When drywall screws (bugle head) are specified in this grade, the dimensions remain per DIN 18182-2; the material determines corrosion behavior (good general corrosion resistance) and the service temperature range (approx. -200 °C to +400 °C, subject to the property class and the joint). Both are covered below with the size table.

## Why Choose A2 Stainless Steel for Drywall Screws (Bugle Head)

The most common stainless group for indoor and general outdoor fasteners. For drywall screws (bugle head), this matters when good general corrosion resistance is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Good general corrosion resistance |

## Galvanic & Galling Considerations

Two important notes for stainless drywall screws (bugle head): (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.

## Comparable Grades

For Drywall Screws (Bugle Head), the alternative stainless grade is A4 (316). The practical dividing line is chlorides: A2 (304) is fine until salt is involved, and A4 (316) exists for the cases where it is — coastal, marine and road-salt service. Neither reaches the strength of a plated class 8.8 or 10.9 fastener.

## Using Stainless Fasteners in Aluminum

The galvanic couple here runs the wrong way: aluminum is the less noble metal, so it corrodes and the fastener does not. What governs the rate is the ratio of areas — a large anode and a small cathode is a tolerable combination, the reverse concentrates the attack into thin material around the hole. An isolating washer plus sealant breaks the circuit; where that is impractical, match the fastener to the substrate.

## Sizes of Drywall Screws (Bugle Head) Available in A2 Stainless Steel

| Nominal diameter (mm) | Thread type | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Drive | Common length range (mm) | Reference standard |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 3.5 | Coarse (S), timber stud | 1.60 | 7.5 | 2.0 | PH2 | 25~55 | DIN 18182-2 |
| 3.5 | Fine (N), steel stud | 0.80 | 7.5 | 2.0 | PH2 | 25~45 | DIN 18182-2 |
| 3.9 | Coarse (S), timber stud | 1.80 | 8.0 | 2.2 | PH2 | 30~70 | DIN 18182-2 |
| 3.9 | Fine (N), steel stud | 0.85 | 8.0 | 2.2 | PH2 | 30~55 | DIN 18182-2 |
| 4.2 | Coarse (S), timber stud | 2.00 | 8.6 | 2.4 | PH2 | 45~90 | DIN 18182-2 |
| 4.8 | Coarse (S), timber stud | 2.20 | 9.5 | 2.6 | PH2 | 70~140 | DIN 18182-2 |

Dimensions are independent of the material: every size above is available in A2 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

A2 Stainless Steel is one of the grades the catalog describes. A non-standard screw is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of 3.5 Drywall Screws (Bugle Head) to DIN 18182-2. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Thread type:** Coarse (S), timber stud
- **Pitch (mm):** 1.60
- **Head diameter dk (mm):** 7.5
- **Head height k (mm):** 2.0
- **Drive:** PH2
- **Common length range (mm):** 25~55

## Dimensions & Specifications (DIN 18182-2)

| Nominal diameter (mm) | Thread type | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Drive | Common length range (mm) | Reference standard |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 3.5 | Coarse (S), timber stud | 1.60 | 7.5 | 2.0 | PH2 | 25~55 | DIN 18182-2 |
| 3.5 | Fine (N), steel stud | 0.80 | 7.5 | 2.0 | PH2 | 25~45 | DIN 18182-2 |
| 3.9 | Coarse (S), timber stud | 1.80 | 8.0 | 2.2 | PH2 | 30~70 | DIN 18182-2 |
| 3.9 | Fine (N), steel stud | 0.85 | 8.0 | 2.2 | PH2 | 30~55 | DIN 18182-2 |
| 4.2 | Coarse (S), timber stud | 2.00 | 8.6 | 2.4 | PH2 | 45~90 | DIN 18182-2 |
| 4.8 | Coarse (S), timber stud | 2.20 | 9.5 | 2.6 | PH2 | 70~140 | DIN 18182-2 |

Product catalog

## Related Drywall Screws products

[![Durable Stainless Steel Drywall Screw for Reliable Construction Projects](https://img.engineeringhardware.com/Durable-Stainless-Steel-Drywall-Screw-for-Reliable-Construction-Projects.webp)](https://engineeringhardware.com/product/durable-stainless-steel-drywall-screw-for-reliable-construction-projects/)

Drywall & Chipboard Screws

### [Durable Stainless Steel Drywall Screw for Reliable Construction Projects](https://engineeringhardware.com/product/durable-stainless-steel-drywall-screw-for-reliable-construction-projects/)

Drywall Screw · DIN, GB

**US$0.012 – 1.20**MOQ 1,000 pieces

[![Universal Ceiling Fasteners for Drywall Grid and Frame](https://img.engineeringhardware.com/Universal-Ceiling-Fasteners-for-Drywall-Grid-and-Frame.webp)](https://engineeringhardware.com/product/universal-ceiling-fasteners-for-drywall-grid-and-frame/)

Drywall & Chipboard Screws

### [Universal Ceiling Fasteners for Drywall Grid and Frame](https://engineeringhardware.com/product/universal-ceiling-fasteners-for-drywall-grid-and-frame/)

Roofing Nail · ISO

**US$0.12 – 0.24**MOQ 1 piece

[![Black Phosphated Bugle Head Drywall Screw (4.8mm) Fine Thread](https://img.engineeringhardware.com/Black-Phosphated-Bugle-Head-Drywall-Screw-4-8mm-Fine-Thread.webp)](https://engineeringhardware.com/product/black-phosphated-bugle-head-drywall-screw-4-8mm-fine-thread/)

Drywall & Chipboard Screws

### [Black Phosphated Bugle Head Drywall Screw (4.8mm) Fine Thread](https://engineeringhardware.com/product/black-phosphated-bugle-head-drywall-screw-4-8mm-fine-thread/)

Bugle Head · DIN

**US$1,320 – 1,800**MOQ 2 tons

[![Csk Countersunk Head White Yellow Zinc Plated Hi-Low Thread Self Tapping Screw](https://img.engineeringhardware.com/Csk-Countersunk-Head-White-Yellow-Zinc-Plated-Hi-Low-Thread-Self-Tapping-Screw.webp)](https://engineeringhardware.com/product/csk-countersunk-head-white-yellow-zinc-plated-hi-low-thread-self-tapping-screw/)

Drywall & Chipboard Screws

### [Csk Countersunk Head White Yellow Zinc Plated Hi-Low Thread Self Tapping Screw](https://engineeringhardware.com/product/csk-countersunk-head-white-yellow-zinc-plated-hi-low-thread-self-tapping-screw/)

Drywall Screw · DIN, GB, GOST

**US$1,848 – 2,112**MOQ 1 ton

[![Black Phosphate Sharp Point Phillips Coarse Thread Wood Gypsum Board Drywall Screw](https://img.engineeringhardware.com/Black-Phosphate-Sharp-Point-Phillips-Coarse-Thread-Wood-Gypsum-Board-Drywall-Screw.webp)](https://engineeringhardware.com/product/black-phosphate-sharp-point-phillips-coarse-thread-wood-gypsum-board-drywall-screw/)

Drywall & Chipboard Screws

### [Black Phosphate Sharp Point Phillips Coarse Thread Wood Gypsum Board Drywall Screw](https://engineeringhardware.com/product/black-phosphate-sharp-point-phillips-coarse-thread-wood-gypsum-board-drywall-screw/)

Flat · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.012**MOQ 1,000 pieces

[![Yellow Zinc Plated Pozi Drive MDF Chipboard Screw Wood Pieza De Tornillo China Screws](https://img.engineeringhardware.com/Yellow-Zinc-Plated-Pozi-Drive-MDF-Chipboard-Screw-Wood-Pieza-De-Tornillo-China-Screws.webp)](https://engineeringhardware.com/product/yellow-zinc-plated-pozi-drive-mdf-chipboard-screw-wood-pieza-de-tornillo-china-screws/)

Drywall & Chipboard Screws

### [Yellow Zinc Plated Pozi Drive MDF Chipboard Screw Wood Pieza De Tornillo China Screws](https://engineeringhardware.com/product/yellow-zinc-plated-pozi-drive-mdf-chipboard-screw-wood-pieza-de-tornillo-china-screws/)

Hexagon Head · DIN, GB, ANSI, JIS

**US$0.60 – 1.08**MOQ 10 pieces

[View all Drywall & Chipboard Screws →](https://engineeringhardware.com/fastener-products/screws/drywall-chipboard-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

What Drywall Screws are specified for, industry by industry. Stocked from 3.5 to 4.8 (screw size).

### Industries that specify Drywall Screws

- **Interior fit-out:** Boarding out timber and steel stud partitions.
- **Ceilings & linings:** Board fixed to furring channel and resilient bar.
- **Housebuilding:** Plasterboard and backing board through a whole plot.
- **Joinery & furniture:** Hardware, hinges and fittings into solid timber and wood-based board.
- **Roofing & cladding:** Profiled sheet and rainscreen fixed to purlins and rails.
- **Volume assembly:** Appliance and consumer products driven at speed with power tools.

### Typical applications

- fixing plasterboard so the head dimples the paper without cutting it
- coarse thread into timber studs, fine thread into steel studs
- driven with a depth-setting nose on a collated or single driver
- forming a thread directly in sheet, board or timber
- fixing where there is no access to add a nut behind the panel
- high-volume driving with a bit and a clutch-set driver

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Pilot hole:** Selection is really a hole-size decision: too small and the screw snaps or splits the material, too large and it strips. The size is stated per row.

### Where to use something else

- Phosphated screws are interior only — the black finish is a driving lubricant, not corrosion protection.
- Not for a joint that will be dismantled and reassembled repeatedly in the same hole — use an insert or a rivet nut instead.

[Full application guide: where Drywall Screws are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/drywall-screws/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A2 Stainless Steel Drywall Screws (Bugle Head) gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A2 Stainless Steel food-grade?

A2 (304) is widely accepted for food contact in non-chloride environments; A4 (316) is preferred where chlorides are present.

### Can A2 Stainless Steel Drywall Screws (Bugle Head) be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A2 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Drywall Screws (Bugle Head) page](https://engineeringhardware.com/fastener/drywall-screws/)

### More Drywall Screws (Bugle Head) Guides