Hex Flange Bolts manufactured in A2 Stainless Steel (A2-70 (304)) are dimensioned to ISO 1665 / DIN 6921. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.
Why Choose A2 Stainless Steel for Hex Flange Bolts
The most common stainless grade for indoor and general outdoor fasteners. For hex flange bolts, this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Hex Flange Bolts in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For Hex Flange Bolts, the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Hex Flange Bolts Available in A2 Stainless Steel
| Size | Pitch (mm) | Flange diameter dc (mm) | Head height k (mm) | Width across flats s (mm) | Reference standard |
|---|---|---|---|---|---|
| M5 | 0.8 | 11.8 | 4.7 | 8.0 | ISO 1665 / DIN 6921 |
| M6 | 1.0 | 14.2 | 5.6 | 10.0 | ISO 1665 / DIN 6921 |
| M8 | 1.25 | 17.9 | 7.2 | 13.0 | ISO 1665 / DIN 6921 |
| M10 | 1.5 | 21.8 | 8.9 | 15.0 | ISO 1665 / DIN 6921 |
| M12 | 1.75 | 26.0 | 10.7 | 18.0 | ISO 1665 / DIN 6921 |
| M14 | 2.0 | 29.9 | 12.3 | 21.0 | ISO 1665 / DIN 6921 |
| M16 | 2.0 | 34.5 | 14.1 | 24.0 | ISO 1665 / DIN 6921 |
| M20 | 2.5 | 42.8 | 17.5 | 30.0 | ISO 1665 / DIN 6921 |
| M24 | 3.0 | 51.1 | 21.0 | 36.0 | ISO 1665 / DIN 6921 |