---
title: "A2 (304) Stainless Steel Roofing Screws with Bonded EPDM Washer"
description: "A2 (304) Stainless Steel Roofing Screws with Bonded EPDM Washer (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70): good general corrosion"
url: https://engineeringhardware.com/guide/material/a2-stainless-steel-roofing-screws-epdm-washer/
source: Engineering Hardware & Fasteners
---

# A2 (304) Stainless Steel Roofing Screws with Bonded EPDM Washer

Screws · Trade series (cladding fastener)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A2 Stainless Steel Roofing Screws with Bonded EPDM Washer are supplied to ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70. Corrosion behaviour is good general corrosion resistance, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is the most common stainless group for indoor and general outdoor fasteners.

- **Grade:** ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
- **Corrosion resistance:** Good general corrosion resistance
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A2 (304) Stainless Steel Roofing Screws with Bonded EPDM Washer reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Roofing-Screws-EPDM.webp)

A2 Stainless Steel (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70) is the most common stainless group for indoor and general outdoor fasteners. Specified on roofing screws with bonded epdm washer it determines the corrosion behaviour (good general corrosion resistance) and the service temperature range (approx. -200 °C to +400 °C, subject to the property class and the joint); the dimensions are ours rather than a standard's, and are listed in full below.

## Why Choose A2 Stainless Steel for Roofing Screws with Bonded EPDM Washer

The most common stainless group for indoor and general outdoor fasteners. For roofing screws with bonded epdm washer, this matters when good general corrosion resistance is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Good general corrosion resistance |

## Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Roofing Screws with Bonded EPDM Washer in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

## Galvanic & Galling Considerations

Two important notes for stainless roofing screws with bonded epdm washer: (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.

## Using Stainless Fasteners in Aluminum

The galvanic couple here runs the wrong way: aluminum is the less noble metal, so it corrodes and the fastener does not. What governs the rate is the ratio of areas — a large anode and a small cathode is a tolerable combination, the reverse concentrates the attack into thin material around the hole. An isolating washer plus sealant breaks the circuit; where that is impractical, match the fastener to the substrate.

## Sizes of Roofing Screws with Bonded EPDM Washer Available in A2 Stainless Steel

| Nominal diameter (mm) | Across flats s (mm) | Washer diameter (mm) | Washer type | Drill capacity (mm) | Common length range (mm) | Material | Finish |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 5.5 | 8 | 16 | Bonded EPDM + steel cap | 1.5~5.0 | 19~100 | Carbon steel | Ruspert / painted head |
| 5.5 | 8 | 19 | Bonded EPDM + steel cap | 1.5~5.0 | 19~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + steel cap | 2.0~6.0 | 25~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + A2 cap | 2.0~6.0 | 25~150 | A2 stainless head | Bi-metal, painted |
| 6.3 | 10 | 22 | Bonded EPDM + A2 cap | 2.0~12.0 | 38~200 | A2 stainless head | Bi-metal, painted |

Dimensions are independent of the material: every size above is available in A2 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

A2 Stainless Steel is one of the grades the catalog describes. A non-standard screw is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of 5.5 Roofing Screws with Bonded EPDM Washer to Trade series (cladding fastener). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Across flats s (mm):** 8
- **Washer diameter (mm):** 16
- **Washer type:** Bonded EPDM + steel cap
- **Drill capacity (mm):** 1.5~5.0
- **Common length range (mm):** 19~100
- **Material:** Carbon steel
- **Finish:** Ruspert / painted head

## Dimensions & Specifications (Trade series (cladding fastener))

| Nominal diameter (mm) | Across flats s (mm) | Washer diameter (mm) | Washer type | Drill capacity (mm) | Common length range (mm) | Material | Finish |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 5.5 | 8 | 16 | Bonded EPDM + steel cap | 1.5~5.0 | 19~100 | Carbon steel | Ruspert / painted head |
| 5.5 | 8 | 19 | Bonded EPDM + steel cap | 1.5~5.0 | 19~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + steel cap | 2.0~6.0 | 25~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + A2 cap | 2.0~6.0 | 25~150 | A2 stainless head | Bi-metal, painted |
| 6.3 | 10 | 22 | Bonded EPDM + A2 cap | 2.0~12.0 | 38~200 | A2 stainless head | Bi-metal, painted |

Product catalog

## Related Roofing & Cladding Screws products

[![Class 4.8 8.8 10.9 12.9 Zinc Plated Nickel Slotted Roof Screw](https://img.engineeringhardware.com/Class-4-8-8-8-10-9-12-9-Zinc-Plated-Nickel-Slotted-Roof-Screw.webp)](https://engineeringhardware.com/product/class-4-8-8-8-10-9-12-9-zinc-plated-nickel-slotted-roof-screw/)

Roofing & Siding Screws

### [Class 4.8 8.8 10.9 12.9 Zinc Plated Nickel Slotted Roof Screw](https://engineeringhardware.com/product/class-4-8-8-8-10-9-12-9-zinc-plated-nickel-slotted-roof-screw/)

Round Head · DIN, ANSI, GB, JIS, BSW, GOST, Nfe 25129

**US$0.096 – 0.12**MOQ 5,000 pieces

[![Made in China Color Painted Hex Washer Head Roofing Screw DIN 7504K China Fastener Manufacturer](https://img.engineeringhardware.com/Made-in-China-Color-Painted-Hex-Washer-Head-Roofing-Screw-DIN-7504K-China-Fastener-Manufacturer.webp)](https://engineeringhardware.com/product/made-in-china-color-painted-hex-washer-head-roofing-screw-din-7504k-china-fastener/)

Roofing & Siding Screws

### [Made in China Color Painted Hex Washer Head Roofing Screw DIN 7504K China Fastener Manufacturer](https://engineeringhardware.com/product/made-in-china-color-painted-hex-washer-head-roofing-screw-din-7504k-china-fastener/)

Roofing Nail · ANSI, DIN, GB, DIN7504K/DIN7504p/DIN7505A/DIN7981/DIN79…

**US$0.12 – 1.20**MOQ 1,000 pieces

[![Sales Promotion Twist Shank Roofing Screw Nails with Washer](https://img.engineeringhardware.com/Sales-Promotion-Twist-Shank-Roofing-Screw-Nails-with-Washer.webp)](https://engineeringhardware.com/product/sales-promotion-twist-shank-roofing-screw-nails-with-washer/)

Roofing & Siding Screws

### [Sales Promotion Twist Shank Roofing Screw Nails with Washer](https://engineeringhardware.com/product/sales-promotion-twist-shank-roofing-screw-nails-with-washer/)

ANSI, DIN, GB, ISO, JIS · Iron/Steel

**US$9.60 – 14.40**MOQ 200 boxes

[![Reliable Quality and Good Price Electro Galvanized Roofing Nail with Washer Assembled Roofing Nail/Roofing Screw Fastener 4.5â² â² 63mm](https://img.engineeringhardware.com/Reliable-Quality-and-Good-Price-Electro-Galvanized-Roofing-Nail-with-Washer-Assembled-Roofing-Nail-Roofing-Screw-Fastener-4-5-63mm.webp)](https://engineeringhardware.com/product/reliable-quality-and-good-price-electro-galvanized-roofing-nail-with-washer-4/)

Roofing & Siding Screws

### [Reliable Quality and Good Price Electro Galvanized Roofing Nail with Washer Assembled Roofing Nail/Roofing Screw Fastener 4.5â² â² 63mm](https://engineeringhardware.com/product/reliable-quality-and-good-price-electro-galvanized-roofing-nail-with-washer-4/)

Connection · International

**US$1,020 – 1,200**MOQ 2 tons

[![Custom Stainless Steel M4.2 Roofing Screws for Truss Heads](https://img.engineeringhardware.com/Custom-Stainless-Steel-M4-2-Roofing-Screws-for-Truss-Heads.webp)](https://engineeringhardware.com/product/custom-stainless-steel-m4-2-roofing-screws-for-truss-heads/)

Roofing & Siding Screws

### [Custom Stainless Steel M4.2 Roofing Screws for Truss Heads](https://engineeringhardware.com/product/custom-stainless-steel-m4-2-roofing-screws-for-truss-heads/)

Round Head · DIN, GB, ANSI, BSW, JIS

**US$0.12**MOQ 1,000 pieces

[![Hex Head Heavy-Duty Metal Roofing Screws](https://img.engineeringhardware.com/Hex-Head-Heavy-Duty-Metal-Roofing-Screws.webp)](https://engineeringhardware.com/product/hex-head-heavy-duty-metal-roofing-screws/)

Roofing & Siding Screws

### [Hex Head Heavy-Duty Metal Roofing Screws](https://engineeringhardware.com/product/hex-head-heavy-duty-metal-roofing-screws/)

Hexagon Head · DIN, GB, ANSI

**US$1,308 – 1,476**MOQ 1 ton

[View all Roofing & Siding Screws →](https://engineeringhardware.com/fastener-products/screws/roofing-siding-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Applications & Industries

What Roofing Screws with Bonded EPDM Washer are specified for, industry by industry. Stocked from 5.5 to 6.3 (screw size).

### Industries that specify Roofing Screws with Bonded EPDM Washer

- **Metal roofing & cladding:** Profiled sheet fixed to steel or timber purlins.
- **Agricultural buildings:** Large-span sheeting where every fixing is a leak path.
- **Industrial refurbishment:** Over-sheeting and repair fixings.
- **Construction & fit-out:** Fixing board, batten, framing and trim into timber and light-gauge steel.
- **Sheet-metal & HVAC:** Ducting, enclosures, trunking and cladding assembled without tapped holes.
- **Joinery & furniture:** Hardware, hinges and fittings into solid timber and wood-based board.

### Typical applications

- fixing through the crown or the trough of a profiled sheet
- bonded EPDM washer seals the hole as the screw is set
- bi-metal heads where a carbon steel screw would stain the sheet
- forming a thread directly in sheet, board or timber
- fixing where there is no access to add a nut behind the panel
- high-volume driving with a bit and a clutch-set driver

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Sealed joints:** Used where the fixing has to keep water or air out as well as hold — the elastomer, not the fastener, decides service life.
- **Pilot hole:** Selection is really a hole-size decision: too small and the screw snaps or splits the material, too large and it strips. The size is stated per row.

### Where to use something else

- Do not over-drive: the failure on a metal roof is almost always an extruded or UV-degraded washer, not the screw.
- Not for a joint that will be dismantled and reassembled repeatedly in the same hole — use an insert or a rivet nut instead.

[Full application guide: where Roofing Screws with Bonded EPDM Washer are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/roofing-screws-epdm-washer/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A2 Stainless Steel Roofing Screws with Bonded EPDM Washer gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A2 Stainless Steel food-grade?

A2 (304) is widely accepted for food contact in non-chloride environments; A4 (316) is preferred where chlorides are present.

### Can A2 Stainless Steel Roofing Screws with Bonded EPDM Washer be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A2 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Roofing Screws with Bonded EPDM Washer page](https://engineeringhardware.com/fastener/roofing-screws-epdm-washer/)

### More Roofing Screws with Bonded EPDM Washer Guides
