---
title: "A2 (304) Stainless Steel Server Rack Screws and Cage-Nut Hardware"
description: "A2 (304) Stainless Steel Server Rack Screws and Cage-Nut Hardware (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70): good general corrosion"
url: https://engineeringhardware.com/guide/material/a2-stainless-steel-server-rack-screws-and-cage-nut-hardware/
source: Engineering Hardware & Fasteners
---

# A2 (304) Stainless Steel Server Rack Screws and Cage-Nut Hardware

Screws · Trade series (rack screws and cage-nut hardware)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A2 Stainless Steel Server Rack Screws and Cage-Nut Hardware are supplied to ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70. Corrosion behaviour is good general corrosion resistance, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is the most common stainless group for indoor and general outdoor fasteners.

- **Grade:** ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
- **Corrosion resistance:** Good general corrosion resistance
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A2 (304) Stainless Steel Server Rack Screws and Cage-Nut Hardware reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Server-Rack-Screws-and-Cage-Nut-Hardware.webp)

A2 Stainless Steel (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70) is the most common stainless group for indoor and general outdoor fasteners. Specified on server rack screws and cage-nut hardware it determines the corrosion behaviour (good general corrosion resistance) and the service temperature range (approx. -200 °C to +400 °C, subject to the property class and the joint); the dimensions are ours rather than a standard's, and are listed in full below.

## Why Choose A2 Stainless Steel for Server Rack Screws and Cage-Nut Hardware

The most common stainless group for indoor and general outdoor fasteners. For server rack screws and cage-nut hardware, this matters when good general corrosion resistance is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Good general corrosion resistance |

## Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Server Rack Screws and Cage-Nut Hardware in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

## Galvanic & Galling Considerations

Two important notes for stainless server rack screws and cage-nut hardware: (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.

## Using Stainless Fasteners in Aluminum

Expect the aluminum to corrode, not the fastener — stainless sits higher in the galvanic series, so the aluminum is the one that gives up material. A small fastener in a thick section spreads the loss over a large area and is usually fine; a large fastener in thin sheet concentrates it and is not. Keep water out of the joint, or isolate the two metals with a nylon or coated washer and a sealant.

## Sizes of Server Rack Screws and Cage-Nut Hardware Available in A2 Stainless Steel

| Thread family | Representative screw lengths | Nominal diameter / pitch | Head form | Mating hardware |
| --- | --- | --- | --- | --- |
| 10-32 | 3/8 / 1/2 / 5/8 in | about 3/16 in; 32 TPI | pan head | cage nut or threaded rack hole |
| 12-24 | 3/8 / 1/2 / 5/8 in | about 7/32 in; 24 TPI | pan head | cage nut or threaded rack hole |
| M6 | 10 / 16 mm | 6 mm; 1.0 pitch | pan head | cage nut or threaded rack hole |

Dimensions are independent of the material: every size above is available in A2 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

A2 Stainless Steel is one of the grades the catalog describes. Lengths and thread lengths outside the standard table are the commonest request, followed by a drive the standard does not offer and a head marked with your own part number. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of 10-32 Server Rack Screws and Cage-Nut Hardware to Trade series (rack screws and cage-nut hardware). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Representative screw lengths:** 3/8 / 1/2 / 5/8 in
- **Nominal diameter / pitch:** about 3/16 in; 32 TPI
- **Head form:** pan head
- **Mating hardware:** cage nut or threaded rack hole

## Dimensions & Specifications (Trade series (rack screws and cage-nut hardware))

| Thread family | Representative screw lengths | Nominal diameter / pitch | Head form | Mating hardware |
| --- | --- | --- | --- | --- |
| 10-32 | 3/8 / 1/2 / 5/8 in | about 3/16 in; 32 TPI | pan head | cage nut or threaded rack hole |
| 12-24 | 3/8 / 1/2 / 5/8 in | about 7/32 in; 24 TPI | pan head | cage nut or threaded rack hole |
| M6 | 10 / 16 mm | 6 mm; 1.0 pitch | pan head | cage nut or threaded rack hole |

Product catalog

## Related Server Rack Screws products

[![Electrical Fittings Self Drilling Screw Countersunk Head Philips Zinc Plated](https://img.engineeringhardware.com/Electrical-Fittings-Self-Drilling-Screw-Countersunk-Head-Philips-Zinc-Plated.webp)](https://engineeringhardware.com/product/electrical-fittings-self-drilling-screw-countersunk-head-philips-zinc-plated/)

Self-Drilling & Tek Screws

### [Electrical Fittings Self Drilling Screw Countersunk Head Philips Zinc Plated](https://engineeringhardware.com/product/electrical-fittings-self-drilling-screw-countersunk-head-philips-zinc-plated/)

Carbon Steel · DIN

**US$1.44 – 1.56**MOQ 1 kilogram

[![Factory Direct Self Tapping Screws Self Drilling Pan Framing Screws for Metal Stud](https://img.engineeringhardware.com/Factory-Direct-Self-Tapping-Screws-Self-Drilling-Pan-Framing-Screws-for-Metal-Stud.webp)](https://engineeringhardware.com/product/factory-direct-self-tapping-screws-self-drilling-pan-framing-screws-for-metal-stud/)

Self-Drilling & Tek Screws

### [Factory Direct Self Tapping Screws Self Drilling Pan Framing Screws for Metal Stud](https://engineeringhardware.com/product/factory-direct-self-tapping-screws-self-drilling-pan-framing-screws-for-metal-stud/)

Pan Head · General Industry

**US$0.024**MOQ 5,000 pieces

[![Premium Roofing Tek Screw with EPDM Rubber Washer for Color Steel Roofing](https://img.engineeringhardware.com/Premium-Roofing-Tek-Screw-with-EPDM-Rubber-Washer-for-Color-Steel-Roofing.webp)](https://engineeringhardware.com/product/premium-roofing-tek-screw-with-epdm-rubber-washer-for-color-steel-roofing/)

Self-Drilling & Tek Screws

### [Premium Roofing Tek Screw with EPDM Rubber Washer for Color Steel Roofing](https://engineeringhardware.com/product/premium-roofing-tek-screw-with-epdm-rubber-washer-for-color-steel-roofing/)

Hexagon Head · DIN, GB

**US$1,344 – 1,358**MOQ 5 tons

[![Carbon Steel Roofing Screw Hex Head Self Drilling Screw With Plastic Washer](https://img.engineeringhardware.com/Carbon-Steel-Roofing-Screw-Hex-Head-Self-Drilling-Screw-With-Plastic-Washer.webp)](https://engineeringhardware.com/product/carbon-steel-roofing-screw-hex-head-self-drilling-screw-with-plastic-washer/)

Self-Drilling & Tek Screws

### [Carbon Steel Roofing Screw Hex Head Self Drilling Screw With Plastic Washer](https://engineeringhardware.com/product/carbon-steel-roofing-screw-hex-head-self-drilling-screw-with-plastic-washer/)

Metric · galvanized

**US$1.44 – 1.80**MOQ 100 kilograms

[![Self Tapping Screw with Price, Fine/Coarse Thread Black Phosphate Bugle Head Gypsum Board Tornil/Wood Screws/Drywall Screws/Self Drilling Screw](https://img.engineeringhardware.com/Self-Tapping-Screw-with-Price-Fine-Coarse-Thread-Black-Phosphate-Bugle-Head-Gypsum-Board-Tornil-Wood-Screws-Drywall-Screws-Self-Drilling-Screw.webp)](https://engineeringhardware.com/product/self-tapping-screw-with-price-fine-coarse-thread-black-phosphate-bugle-head-gypsum/)

Self-Drilling & Tek Screws

### [Self Tapping Screw with Price, Fine/Coarse Thread Black Phosphate Bugle Head Gypsum Board Tornil/Wood Screws/Drywall Screws/Self Drilling Screw](https://engineeringhardware.com/product/self-tapping-screw-with-price-fine-coarse-thread-black-phosphate-bugle-head-gypsum/)

Round Head · GB, SGS

**US$1,140 – 1,800**MOQ 1 ton

[![Good Price Hex Head Screws Stainless Steel 304 316 Hex Head Self-Drilling Screws](https://img.engineeringhardware.com/Good-Price-Hex-Head-Screws-Stainless-Steel-304-316-Hex-Head-Self-Drilling-Screws.webp)](https://engineeringhardware.com/product/good-price-hex-head-screws-stainless-steel-304-316-hex-head-self-drilling-screws/)

Self-Drilling & Tek Screws

### [Good Price Hex Head Screws Stainless Steel 304 316 Hex Head Self-Drilling Screws](https://engineeringhardware.com/product/good-price-hex-head-screws-stainless-steel-304-316-hex-head-self-drilling-screws/)

Hexagon Head · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.0144 – 2.40**MOQ 1,000 pieces

[View all Self-Drilling & Tek Screws →](https://engineeringhardware.com/fastener-products/screws/self-drilling-tek-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

The sectors that buy Server Rack Screws and Cage-Nut Hardware, and the duty each one buys them for. Stocked from 10-32 to M6.

### Industries that specify Server Rack Screws and Cage-Nut Hardware

- **Audio racks:** 10-32 hardware is common where the rack is threaded for that system.
- **IT equipment:** M6 and 12-24 options cover different rack conventions.
- **Rack service:** Pan-head lengths suit front-panel and rail thickness.
- **Data centers:** Rack screws and cage nuts attach rails and equipment to cabinet posts.
- **Automotive & transport:** Chassis, driveline and body fixings that see vibration and are assembled to a controlled preload.
- **Steel fabrication:** Bolted connections in frames, enclosures, walkways and weldments, on the bench and on site.

### Typical applications

- selecting 3/8–5/8 in or 10/16 mm length
- using a cage nut in an unthreaded square rack hole
- keeping the screw thread family consistent across the cabinet
- matching 10-32, 12-24 or M6 to the rack system
- bolting brackets, motors and gearboxes to a frame
- assemblies that are dismantled for service and re-torqued

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Torque and preload:** The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together.

### Where to use something else

- Do not substitute 10-32, 12-24 and M6 by apparent diameter; their pitches are different and cross-threading damages the rack.
- Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material.

[Full application guide: where Server Rack Screws and Cage-Nut Hardware are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/server-rack-screws-and-cage-nut-hardware/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A2 Stainless Steel Server Rack Screws and Cage-Nut Hardware gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A2 Stainless Steel food-grade?

A2 (304) is widely accepted for food contact in non-chloride environments; A4 (316) is preferred where chlorides are present.

### Can A2 Stainless Steel Server Rack Screws and Cage-Nut Hardware be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A2 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Server Rack Screws and Cage-Nut Hardware page](https://engineeringhardware.com/fastener/server-rack-screws-and-cage-nut-hardware/)

### More Server Rack Screws and Cage-Nut Hardware Guides