---
title: "A2 (304) Stainless Steel Tri-Wing Pan-Head Machine Screws"
description: "A2 (304) Stainless Steel Tri-Wing Pan-Head Machine Screws (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70): good general corrosion resistance."
url: https://engineeringhardware.com/guide/material/a2-stainless-steel-tri-wing-pan-head-machine-screws/
source: Engineering Hardware & Fasteners
---

# A2 (304) Stainless Steel Tri-Wing Pan-Head Machine Screws

Screws · Trade series (Tri-Wing pan-head screws)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A2 Stainless Steel Tri-Wing Pan-Head Machine Screws are supplied to ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70. Corrosion behaviour is good general corrosion resistance, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is the most common stainless group for indoor and general outdoor fasteners.

- **Grade:** ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
- **Corrosion resistance:** Good general corrosion resistance
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A2 (304) Stainless Steel Tri-Wing Pan-Head Machine Screws reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Tri-Wing-Pan-Head-Machine-Screws.webp)

Material page for tri-wing pan-head machine screws in A2 Stainless Steel (ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70). The sizes below are the ones we supply; there is no published dimensional standard for this article, so the table rather than a standard number is what to quote. Corrosion behaviour is good general corrosion resistance and the service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

## Why Choose A2 Stainless Steel for Tri-Wing Pan-Head Machine Screws

The most common stainless group for indoor and general outdoor fasteners. For tri-wing pan-head machine screws, this matters when good general corrosion resistance is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Good general corrosion resistance |

## Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Tri-Wing Pan-Head Machine Screws in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

## Comparable Grades

For Tri-Wing Pan-Head Machine Screws, the alternative stainless grade is A4 (316). Choose A2 (304) for general use and A4 (316) wherever chlorides are present; the molybdenum in A4 is the whole difference. Remember that stainless is the corrosion answer, not the strength answer — for load, look at class 8.8 or 10.9 instead.

## Using Stainless Fasteners in Aluminum

Stainless steel is more noble than aluminum, so with an electrolyte present — rain, condensation, salt spray — the aluminum becomes the anode and corrodes at the joint. Area ratio decides how bad it gets: a small stainless fastener in a large aluminum section is normally acceptable, a large stainless fastener in thin aluminum is not. Where the joint gets wet, isolate the metals with a coated or nylon washer and a sealant, or specify an aluminum or coated fastener instead.

## Sizes of Tri-Wing Pan-Head Machine Screws Available in A2 Stainless Steel

| Thread size | Head diameter (mm) | Head height (mm) | Drive | Length range (mm) | Material / finish |
| --- | --- | --- | --- | --- | --- |
| M3 | 5.6 | 1.8 | W2 | 6~25 | A2 stainless / blackened / Nylok-coated |
| M4 | 8.17 | 2.92 | W4 | 6~30 | A2 stainless / blackened / Nylok-coated |
| M5 | 9.47 | 3.37 | W5 | 10~50 | A2 stainless / blackened / Nylok-coated |
| M6 | 12.49 | 4.44 | W6 | 10~50 | A2 stainless / blackened / Nylok-coated |
| M8 | 15.62 | 5.53 | W7 | 10~50 | A2 stainless / blackened / Nylok-coated |

Dimensions are independent of the material: every size above is available in A2 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

A2 Stainless Steel is one of the grades the catalog describes. Material and finish are usually what drives a special — a grade the standard part is not stocked in, or a coating chosen against a salt-spray figure instead of a default. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of M3 Tri-Wing Pan-Head Machine Screws to Trade series (Tri-Wing pan-head screws). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Head diameter (mm):** 5.6
- **Head height (mm):** 1.8
- **Drive:** W2
- **Length range (mm):** 6~25
- **Material / finish:** A2 stainless / blackened / Nylok-coated

## Dimensions & Specifications (Trade series (Tri-Wing pan-head screws))

| Thread size | Head diameter (mm) | Head height (mm) | Drive | Length range (mm) | Material / finish |
| --- | --- | --- | --- | --- | --- |
| M3 | 5.6 | 1.8 | W2 | 6~25 | A2 stainless / blackened / Nylok-coated |
| M4 | 8.17 | 2.92 | W4 | 6~30 | A2 stainless / blackened / Nylok-coated |
| M5 | 9.47 | 3.37 | W5 | 10~50 | A2 stainless / blackened / Nylok-coated |
| M6 | 12.49 | 4.44 | W6 | 10~50 | A2 stainless / blackened / Nylok-coated |
| M8 | 15.62 | 5.53 | W7 | 10~50 | A2 stainless / blackened / Nylok-coated |

Product catalog

## Related Security & Tamper-Resistant Screws products

[![Stainless Steel S Type Clutch Head Anti Theft Security Screws One Way Tamper Proof Security Screws](https://img.engineeringhardware.com/Stainless-Steel-S-Type-Clutch-Head-Anti-Theft-Security-Screws-One-Way-Tamper-Proof-Security-Screws.webp)](https://engineeringhardware.com/product/stainless-steel-s-type-clutch-head-anti-theft-security-screws-one-way-tamper-proof/)

Security & Tamper-Resistant Screws

### [Stainless Steel S Type Clutch Head Anti Theft Security Screws One Way Tamper Proof Security Screws](https://engineeringhardware.com/product/stainless-steel-s-type-clutch-head-anti-theft-security-screws-one-way-tamper-proof/)

Round Head · DIN, ANSI, GB, JIS

**US$0.096 – 0.30**MOQ 10,000 pieces

[![Pin Torx Security Machine Screws with Center Pin Tamper Resistant Drive Button Head Pan Head and Countersunk Flat Head Custom Fasteners](https://img.engineeringhardware.com/Pin-Torx-Security-Machine-Screws-with-Center-Pin-Tamper-Resistant-Drive-Button-Head-Pan-Head-and-Countersunk-Flat-Head-Custom-Fasteners.webp)](https://engineeringhardware.com/product/pin-torx-security-machine-screws-with-center-pin-tamper-resistant-drive-button-head/)

Security & Tamper-Resistant Screws

### [Pin Torx Security Machine Screws with Center Pin Tamper Resistant Drive Button Head Pan Head and Countersunk Flat Head Custom Fasteners](https://engineeringhardware.com/product/pin-torx-security-machine-screws-with-center-pin-tamper-resistant-drive-button-head/)

Radial Locking Precision Round Nut · Custom

**US$0.0384 – 0.072**MOQ 1,000 pieces

[![EAS Anti-Theft Self-Activating Speaker with Eight-Prong Magnetic Clips Gift Box Dual-Insurance Self-Activating Speaker](https://img.engineeringhardware.com/EAS-Anti-Theft-Self-Activating-Speaker-with-Eight-Prong-Magnetic-Clips-Gift-Box-Dual-Insurance-Self-Activating-Speaker.webp)](https://engineeringhardware.com/product/eas-anti-theft-self-activating-speaker-with-eight-prong-magnetic-clips-gift-box-dual/)

Security & Tamper-Resistant Screws

### [EAS Anti-Theft Self-Activating Speaker with Eight-Prong Magnetic Clips Gift Box Dual-Insurance Self-Activating Speaker](https://engineeringhardware.com/product/eas-anti-theft-self-activating-speaker-with-eight-prong-magnetic-clips-gift-box-dual/)

Electronic Label and Tag (Hard Tags) · Shopping Arcade, Supermarket

**US$5.28 – 6.00**MOQ 100 pieces

[![Torx Pin Pan Head Double Lead (Double Diameter) Self-Tapping Screws, Zinc Plated Anti-Theft High-Low Thread Fasteners](https://img.engineeringhardware.com/Torx-Pin-Pan-Head-Double-Lead-Double-Diameter-Self-Tapping-Screws-Zinc-Plated-Anti-Theft-High-Low-Thread-Fasteners.webp)](https://engineeringhardware.com/product/torx-pin-pan-head-double-lead-double-diameter-self-tapping-screws-zinc-plated-anti/)

Security & Tamper-Resistant Screws

### [Torx Pin Pan Head Double Lead (Double Diameter) Self-Tapping Screws, Zinc Plated Anti-Theft High-Low Thread Fasteners](https://engineeringhardware.com/product/torx-pin-pan-head-double-lead-double-diameter-self-tapping-screws-zinc-plated-anti/)

Pan Head · DIN, Accrording to The Drawing or Samples.

**US$0.006 – 6.00**MOQ 50,000 pieces

[![Premium Tamperproof Tri-Wing Screws with Precision Drive Tips for Electric Scooters, Charging Stations and Kiosks](https://img.engineeringhardware.com/Premium-Tamperproof-Tri-Wing-Screws-with-Precision-Drive-Tips-for-Electric-Scooters-Charging-Stations-and-Kiosks.webp)](https://engineeringhardware.com/product/premium-tamperproof-tri-wing-screws-with-precision-drive-tips-for-electric-scooters/)

Security & Tamper-Resistant Screws

### [Premium Tamperproof Tri-Wing Screws with Precision Drive Tips for Electric Scooters, Charging Stations and Kiosks](https://engineeringhardware.com/product/premium-tamperproof-tri-wing-screws-with-precision-drive-tips-for-electric-scooters/)

Round Head · DIN, GB, BSW, JIS, GOST

**US$0.12 – 2.40**MOQ 1 piece

[![Tamper Resistant Proof Safety Screw Anti Theft Security Screw with Pan Torx Pin](https://img.engineeringhardware.com/Tamper-Resistant-Proof-Safety-Screw-Anti-Theft-Security-Screw-with-Pan-Torx-Pin.webp)](https://engineeringhardware.com/product/tamper-resistant-proof-safety-screw-anti-theft-security-screw-with-pan-torx-pin/)

Security & Tamper-Resistant Screws

### [Tamper Resistant Proof Safety Screw Anti Theft Security Screw with Pan Torx Pin](https://engineeringhardware.com/product/tamper-resistant-proof-safety-screw-anti-theft-security-screw-with-pan-torx-pin/)

Pan Head · DIN, GB, ANSI, JIS

**US$0.0384 – 0.26**MOQ 10,000 pieces

[View all Security & Tamper-Resistant Screws →](https://engineeringhardware.com/fastener-products/screws/security-tamper-resistant-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

What Tri-Wing Pan-Head Machine Screws are specified for, industry by industry. Stocked from M3 to M8.

### Industries that specify Tri-Wing Pan-Head Machine Screws

- **Battery equipment:** Blackened or coated options match the surrounding finish.
- **Production assembly:** Drive sizes W2 through W7 follow the thread size.
- **Appliance service:** Tri-Wing drives reduce casual removal from consumer housings.
- **Electronics:** A2 stainless pan heads fit compact covers and shields.
- **Steel fabrication:** Bolted connections in frames, enclosures, walkways and weldments, on the bench and on site.
- **Energy & infrastructure:** Tower, pipework, switchgear and plant fixings specified for long service life and inspectable joints.

### Typical applications

- choosing M3 through M8 and the supplied length range
- selecting A2, blackened or Nylok-coated finish
- using the specified Tri-Wing driver for a pan-head screw
- matching the head diameter and height to the panel
- assemblies that are dismantled for service and re-torqued
- joints where the property class is stated on the drawing

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Torque and preload:** The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together.

### Where to use something else

- Do not use a Phillips bit in the Tri-Wing recess; cam-out damages the drive before the head is seated.
- Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material.

[Full application guide: where Tri-Wing Pan-Head Machine Screws are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/tri-wing-pan-head-machine-screws/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Is A2 Stainless Steel food-grade?

A2 (304) is widely accepted for food contact in non-chloride environments; A4 (316) is preferred where chlorides are present.

### Can A2 Stainless Steel Tri-Wing Pan-Head Machine Screws be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A2 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### Can A2 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Tri-Wing Pan-Head Machine Screws page](https://engineeringhardware.com/fastener/tri-wing-pan-head-machine-screws/)

### More Tri-Wing Pan-Head Machine Screws Guides