---
title: "A4 (316) Stainless Steel Adhesive Cable Tie Mounts"
description: "A4 (316) Stainless Steel Adhesive Cable Tie Mounts (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and chloride"
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-adhesive-cable-tie-mounts/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel Adhesive Cable Tie Mounts

Cable & Cord Management · Trade series (adhesive-backed tie mounts)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel Adhesive Cable Tie Mounts are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel Adhesive Cable Tie Mounts reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Adhesive-Cable-Tie-Mounts.webp)

A4 Stainless Steel is not a material adhesive cable tie mounts are supplied in. Adhesive Cable Tie Mounts are specified by size designation, and this combination does not describe a part that exists.

[See the Adhesive Cable Tie Mounts product page for the specifications that do apply →](https://engineeringhardware.com/fastener/adhesive-cable-tie-mounts/)

Custom manufacturing · Made to drawing

## Need this cable management in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. With no standard to depart from, the tolerance scheme is the specification — which dimensions are critical, and which are simply nominal.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom cable management manufacturing](https://engineeringhardware.com/custom/cable-management/)[Send a drawing](https://engineeringhardware.com/custom/cable-management/#rfq)

## Technical Drawing

Dimensioned line drawing of acrylic adhesive pad Adhesive Cable Tie Mounts to Trade series (adhesive-backed tie mounts). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Mount form:** four-way entry base
- **Surface requirement:** clean, dry, above the adhesive minimum temperature
- **Screw hole:** yes, for secondary fixing
- **Limitation:** load limited by the adhesive bond

## Dimensions & Specifications (Trade series (adhesive-backed tie mounts))

| Backing | Mount form | Surface requirement | Screw hole | Limitation |
| --- | --- | --- | --- | --- |
| acrylic adhesive pad | four-way entry base | clean, dry, above the adhesive minimum temperature | yes, for secondary fixing | load limited by the adhesive bond |
| acrylic adhesive pad | saddle base | clean, dry, above the adhesive minimum temperature | yes, for secondary fixing | load limited by the adhesive bond |
| high-tack adhesive pad | four-way entry base | clean, dry, prepared surface | yes, for secondary fixing | not for textured or low-energy plastics |

Product catalog

## Related Cable Tie Mounts products

[![R-Type Cable Clips Plastic Ladder Wall Wire Rope PA66 Good Quality Cable Clamps](https://img.engineeringhardware.com/R-Type-Cable-Clips-Plastic-Ladder-Wall-Wire-Rope-PA66-Good-Quality-Cable-Clamps.webp)](https://engineeringhardware.com/product/r-type-cable-clips-plastic-ladder-wall-wire-rope-pa66-good-quality-cable-clamps/)

Pipe, Tube, Beam & Cable Clamps

### [R-Type Cable Clips Plastic Ladder Wall Wire Rope PA66 Good Quality Cable Clamps](https://engineeringhardware.com/product/r-type-cable-clips-plastic-ladder-wall-wire-rope-pa66-good-quality-cable-clamps/)

U Type · ISO9001, ISO14001

**US$5.52**MOQ 10 bags

[![Round Cable Clamp Clip Electrical Wire Circle Plastic Clamp Hook 18mm 24mm Multi Size Nail Clip](https://img.engineeringhardware.com/Round-Cable-Clamp-Clip-Electrical-Wire-Circle-Plastic-Clamp-Hook-18mm-24mm-Multi-Size-Nail-Clip.webp)](https://engineeringhardware.com/product/round-cable-clamp-clip-electrical-wire-circle-plastic-clamp-hook-18mm-24mm-multi/)

Pipe, Tube, Beam & Cable Clamps

### [Round Cable Clamp Clip Electrical Wire Circle Plastic Clamp Hook 18mm 24mm Multi Size Nail Clip](https://engineeringhardware.com/product/round-cable-clamp-clip-electrical-wire-circle-plastic-clamp-hook-18mm-24mm-multi/)

Cable Clamp · Plastic

**US$0.12**MOQ 10 bags

[![Heavy Duty Quick Release Toggle Pipe Clamp Coupling for Ventilation Duct Connection](https://img.engineeringhardware.com/Heavy-Duty-Quick-Release-Toggle-Pipe-Clamp-Coupling-for-Ventilation-Duct-Connection.webp)](https://engineeringhardware.com/product/heavy-duty-quick-release-toggle-pipe-clamp-coupling-for-ventilation-duct-connection/)

Pipe, Tube, Beam & Cable Clamps

### [Heavy Duty Quick Release Toggle Pipe Clamp Coupling for Ventilation Duct Connection](https://engineeringhardware.com/product/heavy-duty-quick-release-toggle-pipe-clamp-coupling-for-ventilation-duct-connection/)

Standard, Nonstandard · Stainless Steel

**US$0.96 – 9.60**MOQ 100 pieces

[![Adjustable Beam Clamp Custom Metal Stamping Part](https://img.engineeringhardware.com/Adjustable-Beam-Clamp-Custom-Metal-Stamping-Part.webp)](https://engineeringhardware.com/product/adjustable-beam-clamp-custom-metal-stamping-part/)

Pipe, Tube, Beam & Cable Clamps

### [Adjustable Beam Clamp Custom Metal Stamping Part](https://engineeringhardware.com/product/adjustable-beam-clamp-custom-metal-stamping-part/)

Stainless Steel · Customized Drawings Are Accepted

**US$1.20 – 6.00**MOQ 1,000 pieces

[![Durable Metal Tube Clamp for Premium Sow Farrowing Equipment](https://img.engineeringhardware.com/Durable-Metal-Tube-Clamp-for-Premium-Sow-Farrowing-Equipment.webp)](https://engineeringhardware.com/product/durable-metal-tube-clamp-for-premium-sow-farrowing-equipment/)

Pipe, Tube, Beam & Cable Clamps

### [Durable Metal Tube Clamp for Premium Sow Farrowing Equipment](https://engineeringhardware.com/product/durable-metal-tube-clamp-for-premium-sow-farrowing-equipment/)

Livestock Equipment · Carbon Steel

**US$0.22 – 0.25**MOQ 100 pieces

[![Wall Mount Pipe Clamp Steel Duty OEM Customized Fasteners Type Pipeline Support Pipe Clamp 300mm](https://img.engineeringhardware.com/Wall-Mount-Pipe-Clamp-Steel-Duty-OEM-Customized-Fasteners-Type-Pipeline-Support-Pipe-Clamp-300mm.webp)](https://engineeringhardware.com/product/wall-mount-pipe-clamp-steel-duty-oem-customized-fasteners-type-pipeline-support-pipe/)

Pipe, Tube, Beam & Cable Clamps

### [Wall Mount Pipe Clamp Steel Duty OEM Customized Fasteners Type Pipeline Support Pipe Clamp 300mm](https://engineeringhardware.com/product/wall-mount-pipe-clamp-steel-duty-oem-customized-fasteners-type-pipeline-support-pipe/)

Standard · Metal

**US$2.16 – 4.32**MOQ 100 pieces

[View all Pipe, Tube, Beam & Cable Clamps →](https://engineeringhardware.com/fastener-products/clamps-clips-cable-ties/pipe-tube-beam-cable-clamps/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

Adhesive Cable Tie Mounts are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from acrylic adhesive pad to high-tack adhesive pad (size designation).

### Industries that specify Adhesive Cable Tie Mounts

- **Light equipment:** Small bundles on clean, flat surfaces.
- **Panel building:** Fixing where the panel must not be drilled.
- **Vehicle interiors:** Mounting on trim and moulded surfaces.
- **Retrofit work:** Cable routes added to finished assemblies.
- **Maintenance & MRO:** Replacement of a component matched to an existing drawing.
- **Machine building & OEM:** Made-to-drawing parts used inside a specific assembly.

### Typical applications

- keeping the load well inside the adhesive rating
- preparing and degreasing the surface before applying
- applying above the adhesive minimum temperature
- adding the screw through the base where the bundle is heavy
- a function defined by the part drawing rather than by a catalog standard

### Where to use something else

- Do not rely on adhesive alone overhead or at temperature; use the screw hole the base provides.

[Full application guide: where Adhesive Cable Tie Mounts are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/adhesive-cable-tie-mounts/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Should I choose A4 Stainless Steel or A2 (304) for Adhesive Cable Tie Mounts?

For Adhesive Cable Tie Mounts, A4 Stainless Steel suits general indoor and outdoor use; A2 (304) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.

### Can A4 Stainless Steel Adhesive Cable Tie Mounts gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A4 Stainless Steel food-grade?

A4 (316) is the standard food-contact stainless grade in most jurisdictions, particularly where chloride exposure (brines, dairy CIP) is present.

### Can A4 Stainless Steel Adhesive Cable Tie Mounts be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Adhesive Cable Tie Mounts page](https://engineeringhardware.com/fastener/adhesive-cable-tie-mounts/)