---
title: "A4 (316) Stainless Steel O-Ring Seal"
description: "A4 (316) Stainless Steel O-Ring Seal (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and chloride environments."
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-cad-svg-159-oring/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel O-Ring Seal

Seals · ISO / DIN

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel O-Ring Seal are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel O-Ring Seal reference image](https://engineeringhardware.com/wp-content/uploads/2026/06/O-Ring-Seal-—-ISO-DIN-Series-159-—-ISO-DIN.webp)

A4 Stainless Steel is not a material o-ring seal are supplied in. O-Ring Seal are specified by inside diameter, and this combination does not describe a part that exists.

The materials that do apply are: NBR (Nitrile), FKM (Viton®-type), EPDM, Silicone (VMQ), PTFE.

[See the O-Ring Seal product page for the specifications that do apply →](https://engineeringhardware.com/fastener/cad-svg-159-oring/)

Custom manufacturing · Made to drawing

## Need this seal in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. Inside diameter, cross-section and compound are the three that matter, and the compound is chosen against the fluid and the temperature rather than the dimensions.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom seal manufacturing](https://engineeringhardware.com/custom/seals/)[Send a drawing](https://engineeringhardware.com/custom/seals/#rfq)

## Technical Drawing

Dimensioned line drawing of 5 O-Ring Seal — ISO / DIN (Series 159). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Outer diameter d2 (mm):** 9
- **Wire dia (mm):** 2
- **Material:** NBR 70
- **Working temp range:** -30 to +110 C

## Dimensions & Specifications (ISO / DIN)

| Inner diameter d1 (mm) | Outer diameter d2 (mm) | Wire dia (mm) | Material | Working temp range | Reference standard |
| --- | --- | --- | --- | --- | --- |
| 5 | 9 | 2 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 8 | 12 | 2 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 10 | 16 | 3 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 15 | 21 | 3 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 20 | 26 | 3 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 25 | 33 | 4 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 30 | 38 | 4 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 40 | 50 | 5 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 50 | 60 | 5 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 60 | 72 | 6 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 80 | 92 | 6 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 100 | 114 | 7 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |

Product catalog

## Related CAD O-Rings products

[![Premium Polish Iron Bulk Nails in 2″, 3″, 4″ Sizes](https://img.engineeringhardware.com/Premium-Polish-Iron-Bulk-Nails-in-2-3-4-Sizes.webp)](https://engineeringhardware.com/product/premium-polish-iron-bulk-nails-in-2-3-4-sizes/)

Common, Ring-Shank & Specialty Nails

### [Premium Polish Iron Bulk Nails in 2″, 3″, 4″ Sizes](https://engineeringhardware.com/product/premium-polish-iron-bulk-nails-in-2-3-4-sizes/)

Common Nail · ISO

**US$720.00 – 780.00**MOQ 5 tons

[![Galvanized Big Flat Head Clout Nail Galvanized Cloud Big Head Nails](https://img.engineeringhardware.com/Galvanized-Big-Flat-Head-Clout-Nail-Galvanized-Cloud-Big-Head-Nails.webp)](https://engineeringhardware.com/product/galvanized-big-flat-head-clout-nail-galvanized-cloud-big-head-nails/)

Common, Ring-Shank & Specialty Nails

### [Galvanized Big Flat Head Clout Nail Galvanized Cloud Big Head Nails](https://engineeringhardware.com/product/galvanized-big-flat-head-clout-nail-galvanized-cloud-big-head-nails/)

Common Nail · ANSI, GB

**US$720.00 – 960.00**MOQ 1 ton

[![Duplex Nails Can Be Widely Used in Construction and Decoration Loose Nails Shanghai Yueda](https://img.engineeringhardware.com/Duplex-Nails-Can-Be-Widely-Used-in-Construction-and-Decoration-Loose-Nails-Shanghai-Yueda.webp)](https://engineeringhardware.com/product/duplex-nails-can-be-widely-used-in-construction-and-decoration-loose-nails-shanghai/)

Common, Ring-Shank & Specialty Nails

### [Duplex Nails Can Be Widely Used in Construction and Decoration Loose Nails Shanghai Yueda](https://engineeringhardware.com/product/duplex-nails-can-be-widely-used-in-construction-and-decoration-loose-nails-shanghai/)

Duplex Nails · ANSI, DIN, ISO, JIS, CE

**US$1.20 – 108.00**MOQ 100 boxes

[![Wholesale High Borosilicate Glass Pipe Cute Dog Carb Caps Quartz Banger 420 Nails Glass Bubble Hat Cap Smoking Accessories](https://img.engineeringhardware.com/Wholesale-High-Borosilicate-Glass-Pipe-Cute-Dog-Carb-Caps-Quartz-Banger-420-Nails-Glass-Bubble-Hat-Cap-Smoking-Accessories.webp)](https://engineeringhardware.com/product/wholesale-high-borosilicate-glass-pipe-cute-dog-carb-caps-quartz-banger-420-nails/)

Common, Ring-Shank & Specialty Nails

### [Wholesale High Borosilicate Glass Pipe Cute Dog Carb Caps Quartz Banger 420 Nails Glass Bubble Hat Cap Smoking Accessories](https://engineeringhardware.com/product/wholesale-high-borosilicate-glass-pipe-cute-dog-carb-caps-quartz-banger-420-nails/)

Carb Cap · Borosilicate Glass

**US$1.08 – 1.18**MOQ 5 pieces

[![Genuine Quick Tack High Bond 3 M Super 77 Multipurpose Permanent Spray Adhesive Glue for Paper Cardboard](https://img.engineeringhardware.com/Genuine-Quick-Tack-High-Bond-3-M-Super-77-Multipurpose-Permanent-Spray-Adhesive-Glue-for-Paper-Cardboard.webp)](https://engineeringhardware.com/product/genuine-quick-tack-high-bond-3-m-super-77-multipurpose-permanent-spray-adhesive-glue/)

Common, Ring-Shank & Specialty Nails

### [Genuine Quick Tack High Bond 3 M Super 77 Multipurpose Permanent Spray Adhesive Glue for Paper Cardboard](https://engineeringhardware.com/product/genuine-quick-tack-high-bond-3-m-super-77-multipurpose-permanent-spray-adhesive-glue/)

Acrylic · Automobile, Construction, Packing, Footwear & Leather, Fiber…

**US$11.52 – 15.60**MOQ 1 barrel

[![Acid and Alkali Resistant OEM/ODM Custom Polished Square Boat Nail](https://img.engineeringhardware.com/Acid-and-Alkali-Resistant-OEM-ODM-Custom-Polished-Square-Boat-Nail.webp)](https://engineeringhardware.com/product/acid-and-alkali-resistant-oem-odm-custom-polished-square-boat-nail/)

Common, Ring-Shank & Specialty Nails

### [Acid and Alkali Resistant OEM/ODM Custom Polished Square Boat Nail](https://engineeringhardware.com/product/acid-and-alkali-resistant-oem-odm-custom-polished-square-boat-nail/)

Square Shank Boat Nail · ANSI, DIN, GB, ISO, JIS

**US$780.00 – 960.00**MOQ 5 tons

[View all Common, Ring-Shank & Specialty Nails →](https://engineeringhardware.com/fastener-products/nails-staples-tacks/common-ring-shank-specialty-nails/) [Full product catalog](https://engineeringhardware.com/products/)

## Applications & Industries

O-Ring Seal are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from 5 to 100 (inside diameter).

### Industries that specify O-Ring Seal

- **Process & food equipment:** Sealing at joints that are cleaned and inspected.
- **Hydraulics & pneumatics:** Static and dynamic sealing in cylinders and valve bodies.

### Typical applications

- excluding dust and moisture from a housing
- sealing a joint against fluid or air pressure

### Service conditions to specify against

- **Sealed joints:** Used where the fixing has to keep water or air out as well as hold — the elastomer, not the fastener, decides service life.

[Full application guide: where O-Ring Seal are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/cad-svg-159-oring/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What corrosion resistance do A4 Stainless Steel O-Ring Seal — ISO / DIN (Series 159) offer?

A4 Stainless Steel O-Ring Seal — ISO / DIN (Series 159) provide superior, including marine and chloride environments with a service range of approx. -200 °C to +400 °C, subject to the property class and the joint.

### Should I choose A4 Stainless Steel or A2 (304) for O-Ring Seal — ISO / DIN (Series 159)?

For O-Ring Seal — ISO / DIN (Series 159), A4 Stainless Steel suits general indoor and outdoor use; A2 (304) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.

### Can A4 Stainless Steel O-Ring Seal — ISO / DIN (Series 159) gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A4 Stainless Steel food-grade?

A4 (316) is the standard food-contact stainless grade in most jurisdictions, particularly where chloride exposure (brines, dairy CIP) is present.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full O-Ring Seal — ISO / DIN (Series 159) page](https://engineeringhardware.com/fastener/cad-svg-159-oring/)

### More O-Ring Seal — ISO / DIN (Series 159) Guides
