---
title: "A4 (316) Stainless Steel Hex Keys (Allen Keys)"
description: "A4 (316) Stainless Steel Hex Keys (Allen Keys) (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and chloride"
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-hex-keys-allen-keys/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel Hex Keys (Allen Keys)

Tools · ISO 2936

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel Hex Keys (Allen Keys) are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel Hex Keys (Allen Keys) reference image](https://engineeringhardware.com/wp-content/uploads/2026/06/Hex-Keys-Allen-Keys-—-ISO-2936.webp)

A4 Stainless Steel is not a material hex keys (allen keys) are supplied in. Hex Keys (Allen Keys) are specified by nominal size, and this combination does not describe a part that exists.

[See the Hex Keys (Allen Keys) product page for the specifications that do apply →](https://engineeringhardware.com/fastener/hex-keys-allen-keys/)

Custom manufacturing · Made to drawing

## Need this fastener tool in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. Dimensions, material, finish and form are specified from the drawing — a fastener tool outside the standard range is a variation on existing tooling rather than a new design.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom fastener tool manufacturing](https://engineeringhardware.com/custom/tools/)[Send a drawing](https://engineeringhardware.com/custom/tools/#rfq)

## Technical Drawing

Dimensioned line drawing of 0.7 Hex Keys (Allen Keys) to ISO 2936. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Common bolt sizes:** M1
- **Short leg (mm):** 28
- **Long leg (mm):** 51

## Dimensions & Specifications (ISO 2936)

| Wrench size s (mm) | Common bolt sizes | Short leg (mm) | Long leg (mm) | Reference standard |
| --- | --- | --- | --- | --- |
| 0.7 | M1 | 28 | 51 | ISO 2936 / DIN 911 |
| 0.9 | M1.1 | 28 | 56 | ISO 2936 / DIN 911 |
| 1.0 | M1.2 | 32 | 56 | ISO 2936 / DIN 911 |
| 1.3 | M1.6 | 36 | 63 | ISO 2936 / DIN 911 |
| 1.5 | M2 | 40 | 71 | ISO 2936 / DIN 911 |
| 2.0 | M2.5 | 50 | 90 | ISO 2936 / DIN 911 |
| 2.5 | M3 | 56 | 100 | ISO 2936 / DIN 911 |
| 3.0 | M4 | 63 | 112 | ISO 2936 / DIN 911 |
| 4.0 | M5 | 71 | 125 | ISO 2936 / DIN 911 |
| 5.0 | M6 | 80 | 140 | ISO 2936 / DIN 911 |
| 6.0 | M8 | 90 | 160 | ISO 2936 / DIN 911 |
| 7.0 | --- | 100 | 180 | ISO 2936 / DIN 911 |
| 8.0 | M10 | 112 | 200 | ISO 2936 / DIN 911 |
| 9.0 | --- | 112 | 200 | ISO 2936 / DIN 911 |
| 10.0 | M12 | 125 | 224 | ISO 2936 / DIN 911 |
| 12.0 | M14 | 140 | 250 | ISO 2936 / DIN 911 |
| 14.0 | M16 | 160 | 280 | ISO 2936 / DIN 911 |
| 17.0 | M20 | 180 | 315 | ISO 2936 / DIN 911 |
| 19.0 | M22 | 200 | 355 | ISO 2936 / DIN 911 |
| 22.0 | M24 | 224 | 400 | ISO 2936 / DIN 911 |
| 24.0 | M27 | 250 | 450 | ISO 2936 / DIN 911 |
| 27.0 | M30 | 280 | 500 | ISO 2936 / DIN 911 |
| 32.0 | M36 | 315 | 560 | ISO 2936 / DIN 911 |
| 36.0 | M42 | 355 | 630 | ISO 2936 / DIN 911 |
| 41.0 | M48 | 400 | 710 | ISO 2936 / DIN 911 |
| 46.0 | --- | 450 | 800 | ISO 2936 / DIN 911 |
| 50.0 | --- | 500 | 900 | ISO 2936 / DIN 911 |
| 55.0 | --- | 500 | 900 | ISO 2936 / DIN 911 |
| 60.0 | --- | 560 | 1000 | ISO 2936 / DIN 911 |

Product catalog

## Related Hex Keys (Allen Keys) products

[![Grade 8.8 Hexagon Socket Head Cap Screws Low Price, Good Quality, DIN912](https://img.engineeringhardware.com/Grade-8-8-Hexagon-Socket-Head-Cap-Screws-Low-Price-Good-Quality-DIN912.webp)](https://engineeringhardware.com/product/grade-8-8-hexagon-socket-head-cap-screws-low-price-good-quality-din912/)

Socket Head Cap & Allen Screws

### [Grade 8.8 Hexagon Socket Head Cap Screws Low Price, Good Quality, DIN912](https://engineeringhardware.com/product/grade-8-8-hexagon-socket-head-cap-screws-low-price-good-quality-din912/)

Hexagon Head · DIN

**US$0.012**MOQ 100 pieces

[![High-Quality Stainless Steel Hex Socket Screws for Versatile Applications](https://img.engineeringhardware.com/High-Quality-Stainless-Steel-Hex-Socket-Screws-for-Versatile-Applications.webp)](https://engineeringhardware.com/product/high-quality-stainless-steel-hex-socket-screws-for-versatile-applications/)

Socket Head Cap & Allen Screws

### [High-Quality Stainless Steel Hex Socket Screws for Versatile Applications](https://engineeringhardware.com/product/high-quality-stainless-steel-hex-socket-screws-for-versatile-applications/)

Hexagon Head · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.012**MOQ 100 pieces

[![Alternative dB04729 M3 5 Socket Head Cap Screw for Domino Printer](https://img.engineeringhardware.com/Alternative-dB04729-M3-5-Socket-Head-Cap-Screw-for-Domino-Printer.webp)](https://engineeringhardware.com/product/alternative-db04729-m3-5-socket-head-cap-screw-for-domino-printer/)

Socket Head Cap & Allen Screws

### [Alternative dB04729 M3 5 Socket Head Cap Screw for Domino Printer](https://engineeringhardware.com/product/alternative-db04729-m3-5-socket-head-cap-screw-for-domino-printer/)

RoHS, ISO9001 · to Be Discussed

**Price on request**MOQ 1 piece

[![Customized High Quality Stainless Steel Hex Socket Extra Low Head Cap Screws](https://img.engineeringhardware.com/Customized-High-Quality-Stainless-Steel-Hex-Socket-Extra-Low-Head-Cap-Screws.webp)](https://engineeringhardware.com/product/customized-high-quality-stainless-steel-hex-socket-extra-low-head-cap-screws/)

Socket Head Cap & Allen Screws

### [Customized High Quality Stainless Steel Hex Socket Extra Low Head Cap Screws](https://engineeringhardware.com/product/customized-high-quality-stainless-steel-hex-socket-extra-low-head-cap-screws/)

DIN · Stainless Steel

**US$0.12 – 0.24**MOQ 100 pieces

[![DIN En ISO 4762 Stainless Steel Hex Socket Head Cap Screws](https://img.engineeringhardware.com/DIN-En-ISO-4762-Stainless-Steel-Hex-Socket-Head-Cap-Screws.webp)](https://engineeringhardware.com/product/din-en-iso-4762-stainless-steel-hex-socket-head-cap-screws-2/)

Socket Head Cap & Allen Screws

### [DIN En ISO 4762 Stainless Steel Hex Socket Head Cap Screws](https://engineeringhardware.com/product/din-en-iso-4762-stainless-steel-hex-socket-head-cap-screws-2/)

Round Head · DIN, ANSI, GB, JIS, BSW, GOST

**US$0.11 – 0.24**MOQ 10,000 pieces

[![DIN7984 Carbon Steel Grade 4.8 8.8 Black Oxide Low Head Allen Hex Socket Head Cap Screw](https://img.engineeringhardware.com/DIN7984-Carbon-Steel-Grade-4-8-8-8-Black-Oxide-Low-Head-Allen-Hex-Socket-Head-Cap-Screw.webp)](https://engineeringhardware.com/product/din7984-carbon-steel-grade-4-8-8-8-black-oxide-low-head-allen-hex-socket-head-cap/)

Socket Head Cap & Allen Screws

### [DIN7984 Carbon Steel Grade 4.8 8.8 Black Oxide Low Head Allen Hex Socket Head Cap Screw](https://engineeringhardware.com/product/din7984-carbon-steel-grade-4-8-8-8-black-oxide-low-head-allen-hex-socket-head-cap/)

Round Head · DIN, GB, ANSI, JIS

**US$0.0144 – 0.12**MOQ 10,000 pieces

[View all Socket Head Cap & Allen Screws →](https://engineeringhardware.com/fastener-products/screws/socket-head-cap-allen-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

Where Hex Keys are used, and what decides the specification in each case. Stocked from 0.7 to 60.0 (nominal size).

### Industries that specify Hex Keys

- **Assembly & maintenance:** Installing and servicing the fasteners in this catalog.

### Typical applications

- driving and releasing fasteners on the bench and in the field

[Full application guide: where Hex Keys are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/hex-keys-allen-keys/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Should I choose A4 Stainless Steel or A2 (304) for Hex Keys (Allen Keys)?

For Hex Keys (Allen Keys), A4 Stainless Steel suits general indoor and outdoor use; A2 (304) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.

### Can A4 Stainless Steel Hex Keys (Allen Keys) gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A4 Stainless Steel food-grade?

A4 (316) is the standard food-contact stainless grade in most jurisdictions, particularly where chloride exposure (brines, dairy CIP) is present.

### Can A4 Stainless Steel Hex Keys (Allen Keys) be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Hex Keys (Allen Keys) page](https://engineeringhardware.com/fastener/hex-keys-allen-keys/)