---
title: "A4 (316) Stainless Steel Hex Washer Flange Self-Drilling Screws"
description: "A4 (316) Stainless Steel Hex Washer Flange Self-Drilling Screws (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and"
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-hex-washer-flange-self-drilling-screws/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel Hex Washer Flange Self-Drilling Screws

Screws · Trade series (hex washer flange self-drilling screws)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel Hex Washer Flange Self-Drilling Screws are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel Hex Washer Flange Self-Drilling Screws reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Hex-Washer-Flange-Self-Drilling-Screws.webp)

Material page for hex washer flange self-drilling screws in A4 Stainless Steel (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80). The sizes below are the ones we supply; there is no published dimensional standard for this article, so the table rather than a standard number is what to quote. Corrosion behaviour is superior, including marine and chloride environments and the service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

## Why Choose A4 Stainless Steel for Hex Washer Flange Self-Drilling Screws

Specified for marine, coastal and chemical applications. For hex washer flange self-drilling screws, this matters when superior, including marine and chloride environments is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Superior, including marine and chloride environments |

## Corrosion Behavior in Service

A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Hex Washer Flange Self-Drilling Screws in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.

## Comparable Grades

For Hex Washer Flange Self-Drilling Screws, the alternative stainless grade is A2 (304). Choose A2 (304) for general use and A4 (316) wherever chlorides are present; the molybdenum in A4 is the whole difference. Remember that stainless is the corrosion answer, not the strength answer — for load, look at class 8.8 or 10.9 instead.

## Using Stainless Fasteners in Aluminum

The galvanic couple here runs the wrong way: aluminum is the less noble metal, so it corrodes and the fastener does not. What governs the rate is the ratio of areas — a large anode and a small cathode is a tolerable combination, the reverse concentrates the attack into thin material around the hole. An isolating washer plus sealant breaks the circuit; where that is impractical, match the fastener to the substrate.

## Sizes of Hex Washer Flange Self-Drilling Screws Available in A4 Stainless Steel

| Head form | Bearing surface | Point | Substrate | Typical use |
| --- | --- | --- | --- | --- |
| hex washer head | integral flange | integrated drill point | metal sheet | metal roofing and cladding |
| hex washer head | integral flange | integrated drill point | thin structural members | solar mounting brackets |
| hex washer head | integral flange | integrated drill point | structural steel to sheet | structural assemblies |

Dimensions are independent of the material: every size above is available in A4 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. A non-standard screw is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of hex washer head Hex Washer Flange Self-Drilling Screws to Trade series (hex washer flange self-drilling screws). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Bearing surface:** integral flange
- **Point:** integrated drill point
- **Substrate:** metal sheet
- **Typical use:** metal roofing and cladding

## Dimensions & Specifications (Trade series (hex washer flange self-drilling screws))

| Head form | Bearing surface | Point | Substrate | Typical use |
| --- | --- | --- | --- | --- |
| hex washer head | integral flange | integrated drill point | metal sheet | metal roofing and cladding |
| hex washer head | integral flange | integrated drill point | thin structural members | solar mounting brackets |
| hex washer head | integral flange | integrated drill point | structural steel to sheet | structural assemblies |

Product catalog

## Related Self-Drilling Screws products

[![Neoprene-Washer Self Drilling Screw for Metal Cabinets Size 5.5X38mm Electrical Housing Screw with Imperial-Thread Industrial Fastener for Import Partners](https://img.engineeringhardware.com/Neoprene-Washer-Self-Drilling-Screw-for-Metal-Cabinets-Size-5-5X38mm-Electrical-Housing-Screw-with-Imperial-Thread-Industrial-Fastener-for-Import-Partners.webp)](https://engineeringhardware.com/product/neoprene-washer-self-drilling-screw-for-metal-cabinets-size-5-5x38mm-electrical/)

Self-Drilling & Tek Screws

### [Neoprene-Washer Self Drilling Screw for Metal Cabinets Size 5.5X38mm Electrical Housing Screw with Imperial-Thread Industrial Fastener for Import Partners](https://engineeringhardware.com/product/neoprene-washer-self-drilling-screw-for-metal-cabinets-size-5-5x38mm-electrical/)

DIN, GB, ANSI, Bsw, JIS, GOST · Stainless Steel Carbon Steel.etc

**US$0.12 – 0.18**MOQ 1 piece

[![Painted Hex Wafer Truss Head Self-Drilling Screw for Steel](https://img.engineeringhardware.com/Painted-Hex-Wafer-Truss-Head-Self-Drilling-Screw-for-Steel.webp)](https://engineeringhardware.com/product/painted-hex-wafer-truss-head-self-drilling-screw-for-steel/)

Self-Drilling & Tek Screws

### [Painted Hex Wafer Truss Head Self-Drilling Screw for Steel](https://engineeringhardware.com/product/painted-hex-wafer-truss-head-self-drilling-screw-for-steel/)

Hex Wafer Truss Head · DIN, ANSI, BSW, JIS

**US$0.012 – 0.036**MOQ 5,000 pieces

[![Good Quality White Zinc Self-Drilling Screws Hex Head Hexagonal](https://img.engineeringhardware.com/Good-Quality-White-Zinc-Self-Drilling-Screws-Hex-Head-Hexagonal.webp)](https://engineeringhardware.com/product/good-quality-white-zinc-self-drilling-screws-hex-head-hexagonal/)

Self-Drilling & Tek Screws

### [Good Quality White Zinc Self-Drilling Screws Hex Head Hexagonal](https://engineeringhardware.com/product/good-quality-white-zinc-self-drilling-screws-hex-head-hexagonal/)

Hex/Csk/Pan/Truss · DIN, GB, ANSI, BSW, JIS, GOST

**US$1,560 – 1,920**MOQ 2 tons

[![Best Selling White Zinc Platd Indented Hexagon Washer Head Tek Screw with Bone Washer](https://img.engineeringhardware.com/Best-Selling-White-Zinc-Platd-Indented-Hexagon-Washer-Head-Tek-Screw-with-Bone-Washer.webp)](https://engineeringhardware.com/product/best-selling-white-zinc-platd-indented-hexagon-washer-head-tek-screw-with-bone-washer/)

Self-Drilling & Tek Screws

### [Best Selling White Zinc Platd Indented Hexagon Washer Head Tek Screw with Bone Washer](https://engineeringhardware.com/product/best-selling-white-zinc-platd-indented-hexagon-washer-head-tek-screw-with-bone-washer/)

Hexagon Head · DIN, GB, ANSI, JIS

**US$0.0216 – 0.16**MOQ 10,000 pieces

[![High Quallity Stainless Steel SS304 or Zin Plated Csk Head Self Drilling Screw](https://img.engineeringhardware.com/High-Quallity-Stainless-Steel-SS304-or-Zin-Plated-Csk-Head-Self-Drilling-Screw.webp)](https://engineeringhardware.com/product/high-quallity-stainless-steel-ss304-or-zin-plated-csk-head-self-drilling-screw/)

Self-Drilling & Tek Screws

### [High Quallity Stainless Steel SS304 or Zin Plated Csk Head Self Drilling Screw](https://engineeringhardware.com/product/high-quallity-stainless-steel-ss304-or-zin-plated-csk-head-self-drilling-screw/)

Countersunk Head · DIN, GB, ANSI, BSW, JIS, GOST, Per Customers'desire

**US$0.012 – 0.072**MOQ 3,000 pieces

[![Wholesale 304/316 Stainless Steel Self-Drilling Screws Tek Screws for Outdoor & Marine Applications](https://img.engineeringhardware.com/Wholesale-304-316-Stainless-Steel-Self-Drilling-Screws-Tek-Screws-for-Outdoor-Marine-Applications.webp)](https://engineeringhardware.com/product/wholesale-304-316-stainless-steel-self-drilling-screws-tek-screws-for-outdoor-marine/)

Self-Drilling & Tek Screws

### [Wholesale 304/316 Stainless Steel Self-Drilling Screws Tek Screws for Outdoor & Marine Applications](https://engineeringhardware.com/product/wholesale-304-316-stainless-steel-self-drilling-screws-tek-screws-for-outdoor-marine/)

Countersunk Head · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.0001 – 0.0012**MOQ 500 pieces

[View all Self-Drilling & Tek Screws →](https://engineeringhardware.com/fastener-products/screws/self-drilling-tek-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

Hex Washer Flange Self-Drilling Screws are bought for a small number of well-defined jobs. These are the ones we ship them for.

### Industries that specify Hex Washer Flange Self-Drilling Screws

- **Cladding systems:** One part instead of screw plus washer.
- **Solar mounting:** Hex drive takes the torque a bracket fixing needs.
- **Metal roofing:** An integral flange spreads clamp load on thin sheet.
- **Structural assemblies:** Drills its own hole through structural members.
- **Construction & fit-out:** Fixing board, batten, framing and trim into timber and light-gauge steel.
- **Sheet-metal & HVAC:** Ducting, enclosures, trunking and cladding assembled without tapped holes.

### Typical applications

- selecting length for the full stack
- driving with a nut setter rather than a bit
- letting the flange spread the load on thin sheet
- matching the drill point to the member thickness
- forming a thread directly in sheet, board or timber
- fixing where there is no access to add a nut behind the panel

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Pilot hole:** Selection is really a hole-size decision: too small and the screw snaps or splits the material, too large and it strips. The size is stated per row.

### Where to use something else

- Do not over-torque a flanged screw into thin sheet; the flange will dish the panel and the joint loses clamp.
- Not for a joint that will be dismantled and reassembled repeatedly in the same hole — use an insert or a rivet nut instead.

[Full application guide: where Hex Washer Flange Self-Drilling Screws are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/hex-washer-flange-self-drilling-screws/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A4 Stainless Steel Hex Washer Flange Self-Drilling Screws be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### Can A4 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

### Are A4 Stainless Steel Hex Washer Flange Self-Drilling Screws magnetic?

A4 Stainless Steel Hex Washer Flange Self-Drilling Screws are largely non-magnetic.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Hex Washer Flange Self-Drilling Screws page](https://engineeringhardware.com/fastener/hex-washer-flange-self-drilling-screws/)

### More Hex Washer Flange Self-Drilling Screws Guides
