---
title: "A4 (316) Stainless Steel M.2 SSD Mounting Screws"
description: "A4 (316) Stainless Steel M.2 SSD Mounting Screws (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and chloride"
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-m2-ssd-mounting-screws/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel M.2 SSD Mounting Screws

Screws · Trade series (M.2 mounting screws)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel M.2 SSD Mounting Screws are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel M.2 SSD Mounting Screws reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/M.2-SSD-Mounting-Screws.webp)

A4 Stainless Steel M.2 SSD Mounting Screws are supplied to our own published dimensions — this is a trade-series article rather than one covered by a dimensional standard, so confirm the figures against the part you are replacing. The grade provides superior, including marine and chloride environments and is largely non-magnetic; the practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

## Why Choose A4 Stainless Steel for M.2 SSD Mounting Screws

Specified for marine, coastal and chemical applications. For m.2 ssd mounting screws, this matters when superior, including marine and chloride environments is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Superior, including marine and chloride environments |

## Galvanic & Galling Considerations

Two important notes for stainless m.2 ssd mounting screws: (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.

## Comparable Grades

For M.2 SSD Mounting Screws, the alternative stainless grade is A2 (304). A2 (304) covers general indoor and outdoor service. A4 (316) adds molybdenum, which is what buys the chloride resistance for marine and de-icing-salt exposure. Where strength matters more than corrosion, plated alloy steel in class 8.8 or 10.9 is the swap to make.

## Using Stainless Fasteners in Aluminum

Expect the aluminum to corrode, not the fastener — stainless sits higher in the galvanic series, so the aluminum is the one that gives up material. A small fastener in a thick section spreads the loss over a large area and is usually fine; a large fastener in thin sheet concentrates it and is not. Keep water out of the joint, or isolate the two metals with a nylon or coated washer and a sealant.

## Sizes of M.2 SSD Mounting Screws Available in A4 Stainless Steel

| System option | Thread size | Total length (mm) | Thread length (mm) | Head diameter (mm) | Drive | Selection note |
| --- | --- | --- | --- | --- | --- | --- |
| common 2230 / 2280 retention | M2 | 3 |  |  | varies | check the system standoff |
| platform-specific | M2 | 2 / 3.5 |  |  | varies | check the bracket and shield design |
| generic example | M3 | 3 | 2 | 4 | Phillips | not universal; verify the motherboard |

Dimensions are independent of the material: every size above is available in A4 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. Head form and drive can be specified to the assembly rather than to a standard: a larger bearing face, a security drive, or a socket sized for the tool already on the bench. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of common 2230 / 2280 retention M.2 SSD Mounting Screws to Trade series (M.2 mounting screws). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Thread size:** M2
- **Total length (mm):** 3
- **Drive:** varies
- **Selection note:** check the system standoff

## Dimensions & Specifications (Trade series (M.2 mounting screws))

| System option | Thread size | Total length (mm) | Thread length (mm) | Head diameter (mm) | Drive | Selection note |
| --- | --- | --- | --- | --- | --- | --- |
| common 2230 / 2280 retention | M2 | 3 |  |  | varies | check the system standoff |
| platform-specific | M2 | 2 / 3.5 |  |  | varies | check the bracket and shield design |
| generic example | M3 | 3 | 2 | 4 | Phillips | not universal; verify the motherboard |

Product catalog

## Related M.2 SSD Mounting Screws products

[![Stainless Steel Bugle Batten Self Drilling Type 17 Concrete Wood Screw](https://img.engineeringhardware.com/Stainless-Steel-Bugle-Batten-Self-Drilling-Type-17-Concrete-Wood-Screw.webp)](https://engineeringhardware.com/product/stainless-steel-bugle-batten-self-drilling-type-17-concrete-wood-screw/)

Self-Drilling & Tek Screws

### [Stainless Steel Bugle Batten Self Drilling Type 17 Concrete Wood Screw](https://engineeringhardware.com/product/stainless-steel-bugle-batten-self-drilling-type-17-concrete-wood-screw/)

Round Head · DIN, GB

**US$0.06 – 0.60**MOQ 10,000 pieces

[![Premium Stainless Steel Hex Flange Head Self-Drilling Roof Screws with Rubber Washers](https://img.engineeringhardware.com/Premium-Stainless-Steel-Hex-Flange-Head-Self-Drilling-Roof-Screws-with-Rubber-Washers.webp)](https://engineeringhardware.com/product/premium-stainless-steel-hex-flange-head-self-drilling-roof-screws-with-rubber-washers/)

Self-Drilling & Tek Screws

### [Premium Stainless Steel Hex Flange Head Self-Drilling Roof Screws with Rubber Washers](https://engineeringhardware.com/product/premium-stainless-steel-hex-flange-head-self-drilling-roof-screws-with-rubber-washers/)

Hexagon Head · ANSI, BSW, DIN, GB, GOST, JIS

**US$0.012 – 0.036**MOQ 1,000 pieces

[![6# 8# 10# 12# 14# Flanged Hex Washer Head Stainless Steel Self Drilling Screws DIN7504K](https://img.engineeringhardware.com/6-8-10-12-14-Flanged-Hex-Washer-Head-Stainless-Steel-Self-Drilling-Screws-DIN7504K.webp)](https://engineeringhardware.com/product/6-8-10-12-14-flanged-hex-washer-head-stainless-steel-self-drilling-screws-din7504k/)

Self-Drilling & Tek Screws

### [6# 8# 10# 12# 14# Flanged Hex Washer Head Stainless Steel Self Drilling Screws DIN7504K](https://engineeringhardware.com/product/6-8-10-12-14-flanged-hex-washer-head-stainless-steel-self-drilling-screws-din7504k/)

Stainless Steel · 9.5mm-130mm

**US$0.12 – 0.18**MOQ 1,000 pieces

[![Hex Head Self Drilling Screws C1022 Hot DIP Galvanized China Screw Factory High Quality](https://img.engineeringhardware.com/Hex-Head-Self-Drilling-Screws-C1022-Hot-DIP-Galvanized-China-Screw-Factory-High-Quality.webp)](https://engineeringhardware.com/product/hex-head-self-drilling-screws-c1022-hot-dip-galvanized-china-screw-factory-high/)

Self-Drilling & Tek Screws

### [Hex Head Self Drilling Screws C1022 Hot DIP Galvanized China Screw Factory High Quality](https://engineeringhardware.com/product/hex-head-self-drilling-screws-c1022-hot-dip-galvanized-china-screw-factory-high/)

Hexagon Head · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.012 – 0.048**MOQ 1,000 pieces

[![Metric Hexagon Head Self-Drilling Screws](https://img.engineeringhardware.com/Metric-Hexagon-Head-Self-Drilling-Screws.webp)](https://engineeringhardware.com/product/metric-hexagon-head-self-drilling-screws/)

Self-Drilling & Tek Screws

### [Metric Hexagon Head Self-Drilling Screws](https://engineeringhardware.com/product/metric-hexagon-head-self-drilling-screws/)

Fasteners · GB,GB, DIN, ISO, ANSI/ASTM, B7, BS, JIS etc

**US$1.20 – 3.60**MOQ 1,000 pieces

[![18-8 Stainless Steel Hex Flange Washer Head Self Drillingscrews with Hardened Steel Tip for Metal](https://img.engineeringhardware.com/18-8-Stainless-Steel-Hex-Flange-Washer-Head-Self-Drillingscrews-with-Hardened-Steel-Tip-for-Metal.webp)](https://engineeringhardware.com/product/18-8-stainless-steel-hex-flange-washer-head-self-drillingscrews-with-hardened-steel/)

Self-Drilling & Tek Screws

### [18-8 Stainless Steel Hex Flange Washer Head Self Drillingscrews with Hardened Steel Tip for Metal](https://engineeringhardware.com/product/18-8-stainless-steel-hex-flange-washer-head-self-drillingscrews-with-hardened-steel/)

Stainless Steel · a Thread Ab Thread Machine Thread Cutting Thread

**US$0.0012 – 0.12**MOQ 1,000 pieces

[View all Self-Drilling & Tek Screws →](https://engineeringhardware.com/fastener-products/screws/self-drilling-tek-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

The sectors that buy M.2 SSD Mounting Screws, and the duty each one buys them for. Stocked from common 2230 / 2280 retention to generic example (size designation).

### Industries that specify M.2 SSD Mounting Screws

- **Desktop PC assembly:** System-specific screws secure M.2 drives and heatsink shields.
- **Motherboard service:** M2×3, M2×3.5 and M2×2 examples cover different standoff layouts.
- **IT refurbishment:** The board manual controls the screw and torque selection.
- **Laptop repair:** M2 screws retain 2230 and 2280 storage modules at the board standoff.
- **Energy & infrastructure:** Tower, pipework, switchgear and plant fixings specified for long service life and inspectable joints.
- **Maintenance & MRO:** Stocked replacements matched to an existing property class, thread and finish.

### Typical applications

- checking the motherboard service manual before ordering
- matching the screw to the standoff and shield thickness
- using the generic M3 example only when the system specifies it
- retaining an M.2 drive at its board standoff
- bolting brackets, motors and gearboxes to a frame
- assemblies that are dismantled for service and re-torqued

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Torque and preload:** The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together.

### Where to use something else

- Do not assume every M.2 board uses the same screw; the standoff and system manufacturer control the actual size.
- Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material.

[Full application guide: where M.2 SSD Mounting Screws are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/m2-ssd-mounting-screws/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A4 Stainless Steel M.2 SSD Mounting Screws gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A4 Stainless Steel food-grade?

A4 (316) is the standard food-contact stainless grade in most jurisdictions, particularly where chloride exposure (brines, dairy CIP) is present.

### Can A4 Stainless Steel M.2 SSD Mounting Screws be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full M.2 SSD Mounting Screws page](https://engineeringhardware.com/fastener/m2-ssd-mounting-screws/)

### More M.2 SSD Mounting Screws Guides