---
title: "A4 (316) Stainless Steel Nut Drivers and Nut Setters"
description: "A4 (316) Stainless Steel Nut Drivers and Nut Setters (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and chloride"
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-nut-drivers/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel Nut Drivers and Nut Setters

Tools · Trade series (hexagon nut drivers, across-flats sized)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel Nut Drivers and Nut Setters are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel Nut Drivers and Nut Setters reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Nut-Drivers.webp)

A4 Stainless Steel is not a material nut drivers and nut setters are supplied in. Nut Drivers and Nut Setters are specified by nominal size, and this combination does not describe a part that exists.

[See the Nut Drivers and Nut Setters product page for the specifications that do apply →](https://engineeringhardware.com/fastener/nut-drivers/)

Custom manufacturing · Made to drawing

## Need this fastener tool in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. A non-standard fastener tool is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom fastener tool manufacturing](https://engineeringhardware.com/custom/tools/)[Send a drawing](https://engineeringhardware.com/custom/tools/#rfq)

## Technical Drawing

Dimensioned line drawing of 5.5 mm Nut Drivers and Nut Setters to Trade series (hexagon nut drivers, across-flats sized). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Fits:** M3 hex nut
- **Form:** nut driver / nut setter
- **Typical use:** electronics, sheet metal

## Dimensions & Specifications (Trade series (hexagon nut drivers, across-flats sized))

| Across flats | Fits | Form | Typical use |
| --- | --- | --- | --- |
| 5.5 mm | M3 hex nut | nut driver / nut setter | electronics, sheet metal |
| 7 mm | M4 hex nut | nut driver / nut setter | sheet metal, control panels |
| 8 mm | M5 hex nut, ST4.2 hex-head screw | magnetic nut setter | self-drilling screws |
| 10 mm | M6 hex nut, ST5.5 hex-head screw | magnetic nut setter | roofing and cladding screws |
| 13 mm | M8 hex nut, ST6.3 hex-head screw | magnetic nut setter | roofing, purlin fixing |
| 17 mm | M10 hex nut | nut driver | general assembly |

Product catalog

## Related Nut Drivers products

[![DIN928 DIN929 Standard Lock Cage Projection Spot Metric Square Threaded Welding Nut](https://img.engineeringhardware.com/DIN928-DIN929-Standard-Lock-Cage-Projection-Spot-Metric-Square-Threaded-Welding-Nut.webp)](https://engineeringhardware.com/product/din928-din929-standard-lock-cage-projection-spot-metric-square-threaded-welding-nut/)

Hex & Other Standard Nuts

### [DIN928 DIN929 Standard Lock Cage Projection Spot Metric Square Threaded Welding Nut](https://engineeringhardware.com/product/din928-din929-standard-lock-cage-projection-spot-metric-square-threaded-welding-nut/)

DIN, ASTM, GOST, GB, JIS, ANSI, BS · Metal

**US$0.0032 – 0.0036**MOQ 50,000 pieces

[![Carbon Steel GB 807 – 1988 Round Flat Thin Knurled Nuts](https://img.engineeringhardware.com/Carbon-Steel-GB-807-1988-Round-Flat-Thin-Knurled-Nuts.webp)](https://engineeringhardware.com/product/carbon-steel-gb-807-1988-round-flat-thin-knurled-nuts/)

Hex & Other Standard Nuts

### [Carbon Steel GB 807 – 1988 Round Flat Thin Knurled Nuts](https://engineeringhardware.com/product/carbon-steel-gb-807-1988-round-flat-thin-knurled-nuts/)

Round Nuts · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.012 – 0.12**MOQ 10,000 pieces

[![Custom Precision CNC Machining Parts Brass Nut for Energy Storage Products](https://img.engineeringhardware.com/Custom-Precision-CNC-Machining-Parts-Brass-Nut-for-Energy-Storage-Products.webp)](https://engineeringhardware.com/product/custom-precision-cnc-machining-parts-brass-nut-for-energy-storage-products/)

Hex & Other Standard Nuts

### [Custom Precision CNC Machining Parts Brass Nut for Energy Storage Products](https://engineeringhardware.com/product/custom-precision-cnc-machining-parts-brass-nut-for-energy-storage-products/)

Metal · Spare Parts

**US$1.20 – 12.00**MOQ 100 pieces

[![Hydraulic Cutting Tools Nut Separator](https://img.engineeringhardware.com/Hydraulic-Cutting-Tools-Nut-Separator.webp)](https://engineeringhardware.com/product/hydraulic-cutting-tools-nut-separator/)

Hex & Other Standard Nuts

### [Hydraulic Cutting Tools Nut Separator](https://engineeringhardware.com/product/hydraulic-cutting-tools-nut-separator/)

Hydraulic Tools · Steel

**US$43.20 – 45.60**MOQ 5 pieces

[![Factory Custom Connector Pipe Fitting Brass Nut](https://img.engineeringhardware.com/Factory-Custom-Connector-Pipe-Fitting-Brass-Nut.webp)](https://engineeringhardware.com/product/factory-custom-connector-pipe-fitting-brass-nut/)

Hex & Other Standard Nuts

### [Factory Custom Connector Pipe Fitting Brass Nut](https://engineeringhardware.com/product/factory-custom-connector-pipe-fitting-brass-nut/)

Round Head · GB, ISO

**US$0.97 – 1.09**MOQ 1,000 pieces

[![GB /T 9125 Hexagon Nuts for Pipe Flange Connection](https://img.engineeringhardware.com/GB-T-9125-Hexagon-Nuts-for-Pipe-Flange-Connection.webp)](https://engineeringhardware.com/product/gb-t-9125-hexagon-nuts-for-pipe-flange-connection/)

Hex & Other Standard Nuts

### [GB /T 9125 Hexagon Nuts for Pipe Flange Connection](https://engineeringhardware.com/product/gb-t-9125-hexagon-nuts-for-pipe-flange-connection/)

DIN, ANSI, GB, JIS, GOST · Accepted

**US$0.096**MOQ 100 pieces

[View all Hex & Other Standard Nuts →](https://engineeringhardware.com/fastener-products/nuts/hex-other-standard-nuts/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

Nut Drivers and Nut Setters are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from 5.5 mm to 17 mm (nominal size).

### Industries that specify Nut Drivers and Nut Setters

- **Automotive trim:** Small hex fasteners.
- **Roofing and cladding:** Hex-washer-head screws all day.
- **Control panel build:** Small hex nuts and standoffs.
- **HVAC:** Duct and sheet fixings.
- **Assembly & maintenance:** Installing and servicing the fasteners in this catalog.

### Typical applications

- choosing the depth so the washer seats without over-driving
- sizing by the across-flats, not by the thread
- using a magnetic setter for hex-head roofing screws
- replacing a setter whose socket has belled out
- driving and releasing fasteners on the bench and in the field

### Where to use something else

- Do not keep using a nut setter whose socket has rounded; it starts to spin on the head and that damages the screws, not the tool.

[Full application guide: where Nut Drivers and Nut Setters are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/nut-drivers/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A4 Stainless Steel Nut Drivers and Nut Setters be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### Can A4 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

### Are A4 Stainless Steel Nut Drivers and Nut Setters magnetic?

A4 Stainless Steel Nut Drivers and Nut Setters are largely non-magnetic.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Nut Drivers and Nut Setters page](https://engineeringhardware.com/fastener/nut-drivers/)