Parallel Keys manufactured in A4 Stainless Steel (A4-80 (316)) are dimensioned to DIN 6885 / ISO 773. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.
Why Choose A4 Stainless Steel for Parallel Keys
Specified for marine, coastal and chemical applications. For parallel keys, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A4-80 (316) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Parallel Keys in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Comparable Grades
For Parallel Keys, the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Parallel Keys Available in A4 Stainless Steel
| Shaft diameter range (mm) | Key width b (mm) | Key height h (mm) | Key length range (mm) | Shaft groove depth t1 (mm) | Hub groove depth t2 (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|---|
| 6~8 | 2 | 2 | 6~20 | 1.2 | 1.0 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 8~10 | 3 | 3 | 6~36 | 1.8 | 1.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 10~12 | 4 | 4 | 8~45 | 2.5 | 1.8 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 12~17 | 5 | 5 | 10~56 | 3.0 | 2.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 17~22 | 6 | 6 | 14~70 | 3.5 | 2.8 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 22~30 | 8 | 7 | 18~90 | 4.0 | 3.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 30~38 | 10 | 8 | 22~110 | 5.0 | 3.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 38~44 | 12 | 8 | 28~140 | 5.0 | 3.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 44~50 | 14 | 9 | 36~160 | 5.5 | 3.8 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 50~58 | 16 | 10 | 45~180 | 6.0 | 4.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 58~65 | 18 | 11 | 50~200 | 7.0 | 4.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 65~75 | 20 | 12 | 56~220 | 7.5 | 4.9 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 75~85 | 22 | 14 | 63~250 | 9.0 | 5.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 85~95 | 25 | 14 | 70~280 | 9.0 | 5.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 95~110 | 28 | 16 | 80~320 | 10.0 | 6.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 110~130 | 32 | 18 | 90~360 | 11.0 | 7.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 130~150 | 36 | 20 | 100~400 | 12.0 | 8.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 150~170 | 40 | 22 | 100~400 | 13.0 | 9.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 170~200 | 45 | 25 | 110~450 | 15.0 | 10.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 200~230 | 50 | 28 | 125~500 | 17.0 | 11.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 230~260 | 56 | 32 | 140~500 | 20.0 | 12.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 260~290 | 63 | 32 | 160~500 | 20.0 | 12.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 290~330 | 70 | 36 | 180~500 | 22.0 | 14.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 330~380 | 80 | 40 | 200~500 | 25.0 | 15.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 380~440 | 90 | 45 | 220~500 | 28.0 | 17.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 440~500 | 100 | 50 | 250~500 | 31.0 | 19.5 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |