---
title: "A4 (316) Stainless Steel Roofing Screws with Bonded EPDM Washer"
description: "A4 (316) Stainless Steel Roofing Screws with Bonded EPDM Washer (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and"
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-roofing-screws-epdm-washer/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel Roofing Screws with Bonded EPDM Washer

Screws · Trade series (cladding fastener)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel Roofing Screws with Bonded EPDM Washer are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel Roofing Screws with Bonded EPDM Washer reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Roofing-Screws-EPDM.webp)

Material page for roofing screws with bonded epdm washer in A4 Stainless Steel (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80). The sizes below are the ones we supply; there is no published dimensional standard for this article, so the table rather than a standard number is what to quote. Corrosion behaviour is superior, including marine and chloride environments and the service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

## Why Choose A4 Stainless Steel for Roofing Screws with Bonded EPDM Washer

Specified for marine, coastal and chemical applications. For roofing screws with bonded epdm washer, this matters when superior, including marine and chloride environments is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Superior, including marine and chloride environments |

## Corrosion Behavior in Service

A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Roofing Screws with Bonded EPDM Washer in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.

## Comparable Grades

For Roofing Screws with Bonded EPDM Washer, the alternative stainless grade is A2 (304). The practical dividing line is chlorides: A2 (304) is fine until salt is involved, and A4 (316) exists for the cases where it is — coastal, marine and road-salt service. Neither reaches the strength of a plated class 8.8 or 10.9 fastener.

## Using Stainless Fasteners in Aluminum

Expect the aluminum to corrode, not the fastener — stainless sits higher in the galvanic series, so the aluminum is the one that gives up material. A small fastener in a thick section spreads the loss over a large area and is usually fine; a large fastener in thin sheet concentrates it and is not. Keep water out of the joint, or isolate the two metals with a nylon or coated washer and a sealant.

## Sizes of Roofing Screws with Bonded EPDM Washer Available in A4 Stainless Steel

| Nominal diameter (mm) | Across flats s (mm) | Washer diameter (mm) | Washer type | Drill capacity (mm) | Common length range (mm) | Material | Finish |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 5.5 | 8 | 16 | Bonded EPDM + steel cap | 1.5~5.0 | 19~100 | Carbon steel | Ruspert / painted head |
| 5.5 | 8 | 19 | Bonded EPDM + steel cap | 1.5~5.0 | 19~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + steel cap | 2.0~6.0 | 25~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + A2 cap | 2.0~6.0 | 25~150 | A2 stainless head | Bi-metal, painted |
| 6.3 | 10 | 22 | Bonded EPDM + A2 cap | 2.0~12.0 | 38~200 | A2 stainless head | Bi-metal, painted |

Dimensions are independent of the material: every size above is available in A4 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. A non-standard screw is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of 5.5 Roofing Screws with Bonded EPDM Washer to Trade series (cladding fastener). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Across flats s (mm):** 8
- **Washer diameter (mm):** 16
- **Washer type:** Bonded EPDM + steel cap
- **Drill capacity (mm):** 1.5~5.0
- **Common length range (mm):** 19~100
- **Material:** Carbon steel
- **Finish:** Ruspert / painted head

## Dimensions & Specifications (Trade series (cladding fastener))

| Nominal diameter (mm) | Across flats s (mm) | Washer diameter (mm) | Washer type | Drill capacity (mm) | Common length range (mm) | Material | Finish |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 5.5 | 8 | 16 | Bonded EPDM + steel cap | 1.5~5.0 | 19~100 | Carbon steel | Ruspert / painted head |
| 5.5 | 8 | 19 | Bonded EPDM + steel cap | 1.5~5.0 | 19~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + steel cap | 2.0~6.0 | 25~150 | Carbon steel | Ruspert / painted head |
| 6.3 | 8 | 19 | Bonded EPDM + A2 cap | 2.0~6.0 | 25~150 | A2 stainless head | Bi-metal, painted |
| 6.3 | 10 | 22 | Bonded EPDM + A2 cap | 2.0~12.0 | 38~200 | A2 stainless head | Bi-metal, painted |

Product catalog

## Related Roofing & Cladding Screws products

[![China Wholesale Zinc Plated Roof Screw Drilling Roof Screw Color Zinc Plated Cheap Price Metal Roofing Screws](https://img.engineeringhardware.com/China-Wholesale-Zinc-Plated-Roof-Screw-Drilling-Roof-Screw-Color-Zinc-Plated-Cheap-Price-Metal-Roofing-Screws.webp)](https://engineeringhardware.com/product/china-wholesale-zinc-plated-roof-screw-drilling-roof-screw-color-zinc-plated-cheap/)

Roofing & Siding Screws

### [China Wholesale Zinc Plated Roof Screw Drilling Roof Screw Color Zinc Plated Cheap Price Metal Roofing Screws](https://engineeringhardware.com/product/china-wholesale-zinc-plated-roof-screw-drilling-roof-screw-color-zinc-plated-cheap/)

Iron · Black Zinc Plated

**US$0.012**MOQ 1,000 pieces

[![Concrete 90mm X 5.0mm Corrugated Roofing Screw Floor Nails](https://img.engineeringhardware.com/Concrete-90mm-X-5-0mm-Corrugated-Roofing-Screw-Floor-Nails.webp)](https://engineeringhardware.com/product/concrete-90mm-x-5-0mm-corrugated-roofing-screw-floor-nails/)

Roofing & Siding Screws

### [Concrete 90mm X 5.0mm Corrugated Roofing Screw Floor Nails](https://engineeringhardware.com/product/concrete-90mm-x-5-0mm-corrugated-roofing-screw-floor-nails/)

Round Head · DIN, GB, ANSI, BSW

**US$6.30 – 8.46**MOQ 200 sets

[![Reliable Quality and Good Price Electro Galvanized Roofing Nail with Washer Assembled Roofing Nail/Roofing Screw 4.5′ ′ Fastener](https://img.engineeringhardware.com/Reliable-Quality-and-Good-Price-Electro-Galvanized-Roofing-Nail-with-Washer-Assembled-Roofing-Nail-Roofing-Screw-4-5-Fastener.webp)](https://engineeringhardware.com/product/reliable-quality-and-good-price-electro-galvanized-roofing-nail-with-washer-2/)

Roofing & Siding Screws

### [Reliable Quality and Good Price Electro Galvanized Roofing Nail with Washer Assembled Roofing Nail/Roofing Screw 4.5′ ′ Fastener](https://engineeringhardware.com/product/reliable-quality-and-good-price-electro-galvanized-roofing-nail-with-washer-2/)

Connection · International

**US$1,020 – 1,200**MOQ 2 tons

[![Smooth Twisted Shank Round Head Roof Screw Wire Nail with Plastic Cap](https://img.engineeringhardware.com/Smooth-Twisted-Shank-Round-Head-Roof-Screw-Wire-Nail-with-Plastic-Cap.webp)](https://engineeringhardware.com/product/smooth-twisted-shank-round-head-roof-screw-wire-nail-with-plastic-cap/)

Roofing & Siding Screws

### [Smooth Twisted Shank Round Head Roof Screw Wire Nail with Plastic Cap](https://engineeringhardware.com/product/smooth-twisted-shank-round-head-roof-screw-wire-nail-with-plastic-cap/)

Bearing · International

**US$696.00**MOQ 1 piece

[![Assembled Roofing Nails with Washer/Roofing Screw Nail with Washer](https://img.engineeringhardware.com/Assembled-Roofing-Nails-with-Washer-Roofing-Screw-Nail-with-Washer.webp)](https://engineeringhardware.com/product/assembled-roofing-nails-with-washer-roofing-screw-nail-with-washer/)

Roofing & Siding Screws

### [Assembled Roofing Nails with Washer/Roofing Screw Nail with Washer](https://engineeringhardware.com/product/assembled-roofing-nails-with-washer-roofing-screw-nail-with-washer/)

Roofing Nail · ISO

**US$900.00**MOQ 5 tons

[![Assembled Roofing Nail Galvanized Roofing Screw Nail with Washer](https://img.engineeringhardware.com/Assembled-Roofing-Nail-Galvanized-Roofing-Screw-Nail-with-Washer.webp)](https://engineeringhardware.com/product/assembled-roofing-nail-galvanized-roofing-screw-nail-with-washer/)

Roofing & Siding Screws

### [Assembled Roofing Nail Galvanized Roofing Screw Nail with Washer](https://engineeringhardware.com/product/assembled-roofing-nail-galvanized-roofing-screw-nail-with-washer/)

Roofing Nail · ANSI, DIN, GB, ISO, JIS

**US$690.00 – 936.00**MOQ 3 tons

[View all Roofing & Siding Screws →](https://engineeringhardware.com/fastener-products/screws/roofing-siding-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Applications & Industries

What Roofing Screws with Bonded EPDM Washer are specified for, industry by industry. Stocked from 5.5 to 6.3 (screw size).

### Industries that specify Roofing Screws with Bonded EPDM Washer

- **Metal roofing & cladding:** Profiled sheet fixed to steel or timber purlins.
- **Agricultural buildings:** Large-span sheeting where every fixing is a leak path.
- **Industrial refurbishment:** Over-sheeting and repair fixings.
- **Construction & fit-out:** Fixing board, batten, framing and trim into timber and light-gauge steel.
- **Sheet-metal & HVAC:** Ducting, enclosures, trunking and cladding assembled without tapped holes.
- **Joinery & furniture:** Hardware, hinges and fittings into solid timber and wood-based board.

### Typical applications

- fixing through the crown or the trough of a profiled sheet
- bonded EPDM washer seals the hole as the screw is set
- bi-metal heads where a carbon steel screw would stain the sheet
- forming a thread directly in sheet, board or timber
- fixing where there is no access to add a nut behind the panel
- high-volume driving with a bit and a clutch-set driver

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Sealed joints:** Used where the fixing has to keep water or air out as well as hold — the elastomer, not the fastener, decides service life.
- **Pilot hole:** Selection is really a hole-size decision: too small and the screw snaps or splits the material, too large and it strips. The size is stated per row.

### Where to use something else

- Do not over-drive: the failure on a metal roof is almost always an extruded or UV-degraded washer, not the screw.
- Not for a joint that will be dismantled and reassembled repeatedly in the same hole — use an insert or a rivet nut instead.

[Full application guide: where Roofing Screws with Bonded EPDM Washer are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/roofing-screws-epdm-washer/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A4 Stainless Steel Roofing Screws with Bonded EPDM Washer gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A4 Stainless Steel food-grade?

A4 (316) is the standard food-contact stainless grade in most jurisdictions, particularly where chloride exposure (brines, dairy CIP) is present.

### Can A4 Stainless Steel Roofing Screws with Bonded EPDM Washer be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Roofing Screws with Bonded EPDM Washer page](https://engineeringhardware.com/fastener/roofing-screws-epdm-washer/)

### More Roofing Screws with Bonded EPDM Washer Guides
