For serrated flange lock nuts in A4 Stainless Steel, the controlling selection factors are corrosion exposure, strength requirement and service temperature. The grade data for A4 Stainless Steel (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80) is summarized below together with every size supplied.
Why Choose A4 Stainless Steel for Serrated Flange Lock Nuts
Specified for marine, coastal and chemical applications. For serrated flange lock nuts, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80 |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Serrated Flange Lock Nuts in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Galvanic & Galling Considerations
Two important notes for stainless serrated flange lock nuts: (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.
Using Stainless Fasteners in Aluminum
The galvanic couple here runs the wrong way: aluminum is the less noble metal, so it corrodes and the fastener does not. What governs the rate is the ratio of areas — a large anode and a small cathode is a tolerable combination, the reverse concentrates the attack into thin material around the hole. An isolating washer plus sealant breaks the circuit; where that is impractical, match the fastener to the substrate.
Sizes of Serrated Flange Lock Nuts Available in A4 Stainless Steel
| Thread size | Pitch (mm) | Across flats s (mm) | Flange diameter dc (mm) | Total height m (mm) | Flange thickness c (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M4 | 0.7 | 7 | 9.0 | 5.0 | 1.0 | DIN 6923 |
| M5 | 0.8 | 8 | 11.8 | 5.0 | 1.0 | DIN 6923 |
| M6 | 1.0 | 10 | 14.2 | 6.0 | 1.1 | DIN 6923 |
| M8 | 1.25 | 13 | 17.9 | 8.0 | 1.2 | DIN 6923 |
| M10 | 1.5 | 15 | 21.8 | 10.0 | 1.5 | DIN 6923 |
| M12 | 1.75 | 18 | 26.0 | 12.0 | 1.8 | DIN 6923 |
| M14 | 2.0 | 21 | 29.9 | 14.0 | 2.1 | DIN 6923 |
| M16 | 2.0 | 24 | 34.5 | 16.0 | 2.4 | DIN 6923 |
| M20 | 2.5 | 30 | 42.8 | 20.0 | 3.0 | DIN 6923 |
Dimensions are independent of the material: every size above is available in A4 Stainless Steel.
Custom manufacturing · Made to drawing
Need this nut in a grade that is not listed?
A4 Stainless Steel is one of the grades the catalog describes. Thread size is the obvious variable and rarely the interesting one — height for clearance, across-flats for the tool already in the cell, and the locking feature for the vibration actually present. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
