---
title: "A4 (316) Stainless Steel Toggle Latches (Draw Latches)"
description: "A4 (316) Stainless Steel Toggle Latches (Draw Latches) (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80): superior, including marine and chloride"
url: https://engineeringhardware.com/guide/material/a4-stainless-steel-toggle-latches/
source: Engineering Hardware & Fasteners
---

# A4 (316) Stainless Steel Toggle Latches (Draw Latches)

Panel Latches & Catches · Trade series (over-centre toggle latches)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

A4 Stainless Steel Toggle Latches (Draw Latches) are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.

- **Grade:** ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
- **Corrosion resistance:** Superior, including marine and chloride environments
- **Magnetic response:** Largely non-magnetic
- **Service temperature:** approx. -200 °C to +400 °C, subject to the property class and the joint

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![A4 (316) Stainless Steel Toggle Latches (Draw Latches) reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Toggle-Latches.webp)

A4 Stainless Steel (ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80) is specified for marine, coastal and chemical applications. Specified on toggle latches (draw latches) it determines the corrosion behaviour (superior, including marine and chloride environments) and the service temperature range (approx. -200 °C to +400 °C, subject to the property class and the joint); the dimensions are ours rather than a standard's, and are listed in full below.

## Why Choose A4 Stainless Steel for Toggle Latches (Draw Latches)

Specified for marine, coastal and chemical applications. For toggle latches (draw latches), this matters when superior, including marine and chloride environments is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80 |
| --- | --- |
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C, subject to the property class and the joint |
| Corrosion characteristic | Superior, including marine and chloride environments |

## Corrosion Behavior in Service

A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Toggle Latches (Draw Latches) in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.

## Galvanic & Galling Considerations

For stainless toggle latches (draw latches) the compatibility question is galvanic rather than galling: joined to aluminum or galvanized steel in wet service, stainless drives corrosion of the less-noble metal. Isolate with a coating, sleeve or non-conductive washer where the joint sees moisture. Note also that stainless is softer than hardened carbon steel, so where the part carries a wear or shear duty, check the load against the grade before substituting.

## Using Stainless Fasteners in Aluminum

The galvanic couple here runs the wrong way: aluminum is the less noble metal, so it corrodes and the fastener does not. What governs the rate is the ratio of areas — a large anode and a small cathode is a tolerable combination, the reverse concentrates the attack into thin material around the hole. An isolating washer plus sealant breaks the circuit; where that is impractical, match the fastener to the substrate.

## Sizes of Toggle Latches (Draw Latches) Available in A4 Stainless Steel

| Form | Adjustment | Locking | Typical use |
| --- | --- | --- | --- |
| fixed-hook toggle latch | none | over-centre | cases, covers, panels |
| adjustable-bail toggle latch | threaded bail | over-centre | gasketed covers needing set compression |
| toggle latch with safety catch | threaded bail | over-centre plus secondary catch | vibration and transport |
| padlockable toggle latch | threaded bail | over-centre, padlock hasp | secured enclosures |
| stainless toggle latch | threaded bail | over-centre | washdown and marine |

Dimensions are independent of the material: every size above is available in A4 Stainless Steel.

Custom manufacturing · Made to drawing

## Need this panel latch in a grade that is not listed?

A4 Stainless Steel is one of the grades the catalog describes. The geometry is whatever the drawing says. A machined component has no standard to depart from, so the drawing and the tolerance scheme are the whole specification. Made by stamping or punching.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom panel latch manufacturing](https://engineeringhardware.com/custom/latches/)[Send a drawing](https://engineeringhardware.com/custom/latches/#rfq)

## Technical Drawing

Dimensioned line drawing of fixed-hook toggle latch Toggle Latches (Draw Latches) to Trade series (over-centre toggle latches). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Adjustment:** none
- **Locking:** over-centre
- **Typical use:** cases, covers, panels

## Dimensions & Specifications (Trade series (over-centre toggle latches))

| Form | Adjustment | Locking | Typical use |
| --- | --- | --- | --- |
| fixed-hook toggle latch | none | over-centre | cases, covers, panels |
| adjustable-bail toggle latch | threaded bail | over-centre | gasketed covers needing set compression |
| toggle latch with safety catch | threaded bail | over-centre plus secondary catch | vibration and transport |
| padlockable toggle latch | threaded bail | over-centre, padlock hasp | secured enclosures |
| stainless toggle latch | threaded bail | over-centre | washdown and marine |

Product catalog

## Related Toggle Latches products

[![Electrophoretic Black Color Toggle Latch Industrial Thick Toggle Latch Wooden Box Toolbox Black Toggle Latch J105-1](https://img.engineeringhardware.com/Electrophoretic-Black-Color-Toggle-Latch-Industrial-Thick-Toggle-Latch-Wooden-Box-Toolbox-Black-Toggle-Latch-J105-1.webp)](https://engineeringhardware.com/product/electrophoretic-black-color-toggle-latch-industrial-thick-toggle-latch-wooden-box/)

Toggle, Draw & Over-Center Latches

### [Electrophoretic Black Color Toggle Latch Industrial Thick Toggle Latch Wooden Box Toolbox Black Toggle Latch J105-1](https://engineeringhardware.com/product/electrophoretic-black-color-toggle-latch-industrial-thick-toggle-latch-wooden-box/)

Toggle Latch · Standard

**US$0.14 – 0.22**MOQ 100 sets

[![Custom Toolbox Lockable Toggle Latch Metal Toggle Hasps Catch Lock J002](https://img.engineeringhardware.com/Custom-Toolbox-Lockable-Toggle-Latch-Metal-Toggle-Hasps-Catch-Lock-J002.webp)](https://engineeringhardware.com/product/custom-toolbox-lockable-toggle-latch-metal-toggle-hasps-catch-lock-j002/)

Toggle, Draw & Over-Center Latches

### [Custom Toolbox Lockable Toggle Latch Metal Toggle Hasps Catch Lock J002](https://engineeringhardware.com/product/custom-toolbox-lockable-toggle-latch-metal-toggle-hasps-catch-lock-j002/)

Standard · Metal

**US$0.35 – 0.40**MOQ 100 pieces

[![Nrh Stainless Steel Heavy Duty Spring Loaded Door Cabinet Toggle Latch](https://img.engineeringhardware.com/Nrh-Stainless-Steel-Heavy-Duty-Spring-Loaded-Door-Cabinet-Toggle-Latch.webp)](https://engineeringhardware.com/product/nrh-stainless-steel-heavy-duty-spring-loaded-door-cabinet-toggle-latch/)

Toggle, Draw & Over-Center Latches

### [Nrh Stainless Steel Heavy Duty Spring Loaded Door Cabinet Toggle Latch](https://engineeringhardware.com/product/nrh-stainless-steel-heavy-duty-spring-loaded-door-cabinet-toggle-latch/)

Toggle Latch · Standard

**US$0.11 – 0.18**MOQ 1 piece

[![Durable Customized Spring Toggle Latch for Tool Boxes](https://img.engineeringhardware.com/Durable-Customized-Spring-Toggle-Latch-for-Tool-Boxes.webp)](https://engineeringhardware.com/product/durable-customized-spring-toggle-latch-for-tool-boxes/)

Toggle, Draw & Over-Center Latches

### [Durable Customized Spring Toggle Latch for Tool Boxes](https://engineeringhardware.com/product/durable-customized-spring-toggle-latch-for-tool-boxes/)

Standard · Metal

**US$0.66 – 13.18**MOQ 1,000 pieces

[![Heavy Duty Over Center Latch with Double Rod Adjustable Draw Latch](https://img.engineeringhardware.com/Heavy-Duty-Over-Center-Latch-with-Double-Rod-Adjustable-Draw-Latch.webp)](https://engineeringhardware.com/product/heavy-duty-over-center-latch-with-double-rod-adjustable-draw-latch/)

Toggle, Draw & Over-Center Latches

### [Heavy Duty Over Center Latch with Double Rod Adjustable Draw Latch](https://engineeringhardware.com/product/heavy-duty-over-center-latch-with-double-rod-adjustable-draw-latch/)

Key Lock · Steel

**US$3.60**MOQ 1,000 pieces

[![Stainless Steel Electric Vehicle Battery Enclosure Toggle Latch Lock](https://img.engineeringhardware.com/Stainless-Steel-Electric-Vehicle-Battery-Enclosure-Toggle-Latch-Lock.webp)](https://engineeringhardware.com/product/stainless-steel-electric-vehicle-battery-enclosure-toggle-latch-lock/)

Toggle, Draw & Over-Center Latches

### [Stainless Steel Electric Vehicle Battery Enclosure Toggle Latch Lock](https://engineeringhardware.com/product/stainless-steel-electric-vehicle-battery-enclosure-toggle-latch-lock/)

Connection · International

**US$0.66 – 0.74**MOQ 100 pieces

[View all Toggle, Draw & Over-Center Latches →](https://engineeringhardware.com/fastener-products/specialty-fasteners/toggle-draw-over-center-latches/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

What Toggle Latches are specified for, industry by industry. Stocked from fixed-hook toggle latch to stainless toggle latch (size designation).

### Industries that specify Toggle Latches

- **Food equipment:** Stainless, washdown.
- **Electrical enclosures:** Gasketed lids.
- **Cases and transit:** Vibration-resistant closing.
- **Machine guards:** Repeated access.
- **Machine building & OEM:** Made-to-drawing parts used inside a specific assembly.
- **Maintenance & MRO:** Replacement of a component matched to an existing drawing.

### Typical applications

- selecting stainless for washdown and marine use
- checking the gasket compression after adjustment
- setting the bail so the lever locks firmly past centre
- choosing a safety-catch version for transport
- a function defined by the part drawing rather than by a catalog standard

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Vibration:** Specified where cyclic load would loosen a plain nut or screw — rotating plant, rail, mobile equipment and anything that is not re-torqued in service.

### Where to use something else

- Do not adjust a toggle latch so tight that the lever will not go over centre; a latch stopped short of centre is held only by hand pressure.

[Full application guide: where Toggle Latches are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/toggle-latches/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Can A4 Stainless Steel Toggle Latches (Draw Latches) gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

### Is A4 Stainless Steel food-grade?

A4 (316) is the standard food-contact stainless grade in most jurisdictions, particularly where chloride exposure (brines, dairy CIP) is present.

### Can A4 Stainless Steel Toggle Latches (Draw Latches) be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

### What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C, subject to the property class and the joint.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Toggle Latches (Draw Latches) page](https://engineeringhardware.com/fastener/toggle-latches/)