Material specification page for blind pop rivet in Grade 12.9 Steel. Covers the grade designation (class 12.9), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to GB/T 12618 / ISO 15983.
Why Choose Grade 12.9 Steel for Blind Pop Rivet — GB/T 12618 / ISO 15983 (Series 098)
The highest common strength class, for high-load machine assembly. For blind pop rivet — gb/t 12618 / iso 15983 (series 098), this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel blind pop rivet — gb/t 12618 / iso 15983 (series 098) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Blind Pop Rivet — GB/T 12618 / ISO 15983 (Series 098), class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Blind Pop Rivet — GB/T 12618 / ISO 15983 (Series 098) Available in Grade 12.9 Steel
| Nominal diameter (mm) | Grip range (mm) | Cap diameter dk (mm) | Free length L (mm) | Body / mandrel material | Reference standard |
|---|---|---|---|---|---|
| 2.4 | 0.5~3.0 | 5.0 | 7.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 3.0 | 0.5~4.0 | 6.0 | 8.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 3.2 | 0.5~6.0 | 6.4 | 10.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 4.0 | 0.5~6.0 | 8.0 | 12.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 4.8 | 0.5~8.0 | 9.5 | 14.0 | Aluminum / steel | ISO 15977 / DIN 7337 |
| 5.0 | 1.0~10.0 | 10.0 | 16.0 | Stainless / stainless | ISO 15977 / DIN 7337 |
| 6.0 | 1.5~12.0 | 12.0 | 18.0 | Stainless / stainless | ISO 15977 / DIN 7337 |