---
title: "Property Class 12.9 Steel Inch Fully Threaded Rod, ASTM A193 B7"
description: "Property Class 12.9 Steel Inch Fully Threaded Rod, ASTM A193 B7 (ISO 898-1 property class 12.9): requires plating or black-oxide protection."
url: https://engineeringhardware.com/guide/material/grade-12-9-steel-inch-fully-threaded-rod-astm-a193-b7/
source: Engineering Hardware & Fasteners
---

# Property Class 12.9 Steel Inch Fully Threaded Rod, ASTM A193 B7

Bolts · ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

Property Class 12.9 Steel Inch Fully Threaded Rod, ASTM A193 B7 are supplied to ISO 898-1 property class 12.9. Corrosion behaviour is requires plating or black-oxide protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the highest common strength class, for high-load machine assembly.

- **Grade:** ISO 898-1 property class 12.9
- **Corrosion resistance:** Requires plating or black-oxide protection
- **Magnetic response:** Magnetic
- **Service temperature:** commonly limited to approx. +300 °C; confirm against the coating and the load

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![Property Class 12.9 Steel Inch Fully Threaded Rod, ASTM A193 B7 reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Inch-Fully-Threaded-Rod-ASTM-A193-B7.webp)

For inch fully threaded rod, astm a193 b7 in Property Class 12.9 Steel, the controlling selection factors are corrosion exposure, strength requirement and service temperature. The grade data for Property Class 12.9 Steel (ISO 898-1 property class 12.9) is summarized below together with every size supplied.

## Why Choose Property Class 12.9 Steel for Inch Fully Threaded Rod, ASTM A193 B7

The highest common strength class, for high-load machine assembly. For inch fully threaded rod, astm a193 b7, this matters when requires plating or black-oxide protection is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 898-1 property class 12.9 |
| --- | --- |
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating or black-oxide protection |

## Corrosion Behavior in Service

Carbon and alloy steel inch fully threaded rod, astm a193 b7 require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.

## Galvanic & Galling Considerations

For inch fully threaded rod, astm a193 b7 in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

## Sizes of Inch Fully Threaded Rod, ASTM A193 B7 Available in Property Class 12.9 Steel

| Nominal size | Thread series | Standard lengths (ft) | Minimum tensile (ksi) | Minimum yield (ksi) | Elongation minimum (%) | Finish options | Reference standard |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 1/4-20 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 3/8-16 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 1/2-13 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 3/4-10 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 1-8 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 1-1/4-7 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |

Dimensions are independent of the material: every size above is available in Property Class 12.9 Steel.

Custom manufacturing · Made to drawing

## Need this bolt in a grade that is not listed?

Grade 12 9 Steel is one of the grades the catalog describes. Dimensions, material, finish and form are specified from the drawing — a bolt outside the standard range is a variation on existing tooling rather than a new design. Made by cold heading or hot forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom bolt manufacturing](https://engineeringhardware.com/custom/bolts/)[Send a drawing](https://engineeringhardware.com/custom/bolts/#rfq)

## Technical Drawing

Dimensioned line drawing of 1/4-20 Inch Fully Threaded Rod, ASTM A193 B7 to ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Thread series:** UNC / optional UNF or 8UN
- **Standard lengths (ft):** 3 / 6 / 12
- **Minimum tensile (ksi):** 125
- **Minimum yield (ksi):** 105
- **Elongation minimum (%):** 16
- **Finish options:** plain / yellow-zinc / black-oxide / hot-dip-galvanized

## Dimensions & Specifications (ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1)

| Nominal size | Thread series | Standard lengths (ft) | Minimum tensile (ksi) | Minimum yield (ksi) | Elongation minimum (%) | Finish options | Reference standard |
| --- | --- | --- | --- | --- | --- | --- | --- |
| 1/4-20 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 3/8-16 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 1/2-13 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 3/4-10 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 1-8 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |
| 1-1/4-7 | UNC / optional UNF or 8UN | 3 / 6 / 12 | 125 | 105 | 16 | plain / yellow-zinc / black-oxide / hot-dip-galvanized | ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1 |

Product catalog

## Related Studs & Threaded Rods products

[![Factory Direct Sales Threaded Rod Mounting Shock-Absorbing Cushioning Ring Clamp for Mechanical Components](https://img.engineeringhardware.com/Factory-Direct-Sales-Threaded-Rod-Mounting-Shock-Absorbing-Cushioning-Ring-Clamp-for-Mechanical-Components.webp)](https://engineeringhardware.com/product/factory-direct-sales-threaded-rod-mounting-shock-absorbing-cushioning-ring-clamp-for/)

Fully Threaded Rods & Studs

### [Factory Direct Sales Threaded Rod Mounting Shock-Absorbing Cushioning Ring Clamp for Mechanical Components](https://engineeringhardware.com/product/factory-direct-sales-threaded-rod-mounting-shock-absorbing-cushioning-ring-clamp-for/)

Iron Galvanized 201 304 · Automotive, Industrial, Marine, and Mechanic…

**US$0.0792 – 0.084**MOQ 500 pieces

[![Durable Clear Zinc Threaded Rods – Customizable From 6mm to 16mm](https://img.engineeringhardware.com/Durable-Clear-Zinc-Threaded-Rods-Customizable-From-6mm-to-16mm.webp)](https://engineeringhardware.com/product/durable-clear-zinc-threaded-rods-customizable-from-6mm-to-16mm/)

Fully Threaded Rods & Studs

### [Durable Clear Zinc Threaded Rods – Customizable From 6mm to 16mm](https://engineeringhardware.com/product/durable-clear-zinc-threaded-rods-customizable-from-6mm-to-16mm/)

Stainless Steel · A

**US$2.40 – 12.00**MOQ 500 pieces

[![DIN975 Standard Full Thread Stud, M2-M100 Threaded Rod](https://img.engineeringhardware.com/DIN975-Standard-Full-Thread-Stud-M2-M100-Threaded-Rod.webp)](https://engineeringhardware.com/product/din975-standard-full-thread-stud-m2-m100-threaded-rod/)

Fully Threaded Rods & Studs

### [DIN975 Standard Full Thread Stud, M2-M100 Threaded Rod](https://engineeringhardware.com/product/din975-standard-full-thread-stud-m2-m100-threaded-rod/)

DIN · Carbon Steel/Stainless Steel/Aluminum

**US$0.12**MOQ 1,000 pieces

[![304 Stainless Steel Hex Coupling Nut Long Hex Connector Nut for Threaded Rod Extension and Joining](https://img.engineeringhardware.com/304-Stainless-Steel-Hex-Coupling-Nut-Long-Hex-Connector-Nut-for-Threaded-Rod-Extension-and-Joining.webp)](https://engineeringhardware.com/product/304-stainless-steel-hex-coupling-nut-long-hex-connector-nut-for-threaded-rod/)

Fully Threaded Rods & Studs

### [304 Stainless Steel Hex Coupling Nut Long Hex Connector Nut for Threaded Rod Extension and Joining](https://engineeringhardware.com/product/304-stainless-steel-hex-coupling-nut-long-hex-connector-nut-for-threaded-rod/)

Hexagon Head · DIN, ANSI, GB, JIS, BSW, GOST

**US$0.012 – 0.12**MOQ 1,000 pieces

[![Long Galvanized Threaded Rod 2m-6m Zinc Coated, for Structural Engineering](https://img.engineeringhardware.com/Long-Galvanized-Threaded-Rod-2m-6m-Zinc-Coated-for-Structural-Engineering.webp)](https://engineeringhardware.com/product/long-galvanized-threaded-rod-2m-6m-zinc-coated-for-structural-engineering/)

Fully Threaded Rods & Studs

### [Long Galvanized Threaded Rod 2m-6m Zinc Coated, for Structural Engineering](https://engineeringhardware.com/product/long-galvanized-threaded-rod-2m-6m-zinc-coated-for-structural-engineering/)

Carbon Steel · A

**US$0.12 – 0.96**MOQ 100 pieces

[![Aluminum Concrete Form Threaded Rod with Tie Nut and Wing Nut](https://img.engineeringhardware.com/Aluminum-Concrete-Form-Threaded-Rod-with-Tie-Nut-and-Wing-Nut.webp)](https://engineeringhardware.com/product/aluminum-concrete-form-threaded-rod-with-tie-nut-and-wing-nut/)

Fully Threaded Rods & Studs

### [Aluminum Concrete Form Threaded Rod with Tie Nut and Wing Nut](https://engineeringhardware.com/product/aluminum-concrete-form-threaded-rod-with-tie-nut-and-wing-nut/)

Fasteners · Steel

**US$2.46 – 2.52**MOQ 1,000 pieces

[View all Fully Threaded Rods & Studs →](https://engineeringhardware.com/fastener-products/threaded-rods-studs/fully-threaded-rods-studs/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

The sectors that buy Inch Fully Threaded Rod to ASTM A193 Grade B7; ASME B18.31.3 and ASME B1.1, and the duty each one buys them for. Stocked from 1/4-20 to 1-1/4-7 (screw size).

### Industries that specify Inch Fully Threaded Rod

- **Refinery maintenance:** Bolting packages exposed to heat, pressure and hydrocarbon service.
- **Power generation:** Large flanged joints and equipment supports using inch specifications.
- **Structural plant:** Tie rods and hold-down assemblies requiring ASTM A193 Grade B7 material.
- **Pressure vessels:** High-strength threaded rod and studs in flanged pressure equipment.
- **Plant & machine installation:** Anchoring and levelling machines onto bases and frames.
- **Steel fabrication:** Hanger rods, tie rods and made-to-length threaded assemblies.

### Typical applications

- assembling flanged joints where a full-length thread is required
- selecting ASTM A193 Grade B7 strength and a compatible finish
- cutting standard 3, 6 or 12 ft stock to the required stud length
- providing a high-strength inch threaded member for nuts at both ends
- made-to-length assemblies cut and threaded on site
- clamping a joint from both ends where a headed bolt will not fit

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Exterior structural:** Hot-dip galvanised options for external steelwork; allow for the thicker coating in the mating thread.

### Where to use something else

- Do not mix coatings and nut materials without checking thread compatibility and service temperature.
- Not for a joint that must be tightened from one side only — there is no head to hold.

[Full application guide: where Inch Fully Threaded Rod are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/inch-fully-threaded-rod-astm-a193-b7/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What corrosion resistance do Property Class 12.9 Steel Inch Fully Threaded Rod, ASTM A193 B7 offer?

Property Class 12.9 Steel Inch Fully Threaded Rod, ASTM A193 B7 provide requires plating or black-oxide protection with a service range of commonly limited to approx. +300 °C; confirm against the coating and the load.

### When should I move from ISO 898-1 property class 12.9 to class 8.8 for Inch Fully Threaded Rod, ASTM A193 B7?

Step up to class 8.8 when the joint preload approaches the proof load of the current class. The higher class adds preload at the same diameter, often saving size and weight.

### Is Property Class 12.9 Steel prone to hydrogen embrittlement?

Class 10.9 and above can be susceptible to hydrogen embrittlement when electroplated. Specify post-plating baking, or use mechanical-zinc / zinc-flake finishes which avoid the cathodic plating step.

### Which finish is best for outdoor Inch Fully Threaded Rod, ASTM A193 B7?

For outdoor service in steel, hot-dip galvanizing gives the longest life; zinc-flake (Geomet/Delta-Tone family) gives a thinner film with excellent salt-spray performance; standard zinc plating is the lowest-cost option for general indoor / shielded outdoor use.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Inch Fully Threaded Rod, ASTM A193 B7 page](https://engineeringhardware.com/fastener/inch-fully-threaded-rod-astm-a193-b7/)

### More Inch Fully Threaded Rod, ASTM A193 B7 Guides
