Material specification page for push-in pneumatic fittings in Grade 12.9 Steel. Covers the grade designation (class 12.9), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to Industry standard.
Why Choose Grade 12.9 Steel for Push-In Pneumatic Fittings
The highest common strength class, for high-load machine assembly. For push-in pneumatic fittings, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel push-in pneumatic fittings require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Push-In Pneumatic Fittings, class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Push-In Pneumatic Fittings Available in Grade 12.9 Steel
| Tube OD (mm) | Thread size | Flow ref (Nl/min) | Max pressure (bar) | Pull-out force (N) | Reference standard | Notes |
|---|---|---|---|---|---|---|
| 4 | M5x0.8 | 80 | 10 | 70 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 4 | 1/8 BSP | 80 | 10 | 70 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 6 | M5x0.8 | 200 | 10 | 120 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 6 | 1/8 BSP | 200 | 10 | 120 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 6 | 1/4 BSP | 200 | 10 | 120 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 8 | 1/4 BSP | 350 | 10 | 180 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 8 | 3/8 BSP | 350 | 10 | 180 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 10 | 1/4 BSP | 500 | 10 | 250 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 10 | 3/8 BSP | 500 | 10 | 250 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 10 | 1/2 BSP | 500 | 10 | 250 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 12 | 3/8 BSP | 700 | 10 | 350 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 12 | 1/2 BSP | 700 | 10 | 350 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 16 | 1/2 BSP | 1200 | 10 | 500 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |
| 16 | 3/4 BSP | 1200 | 10 | 500 | ISO 6150 | Push-in pneumatic fitting for PA/PU tubing |