Material specification page for sealing screws with bonded washer in Property Class 12.9 Steel. Covers the grade designation (ISO 898-1 property class 12.9), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to DIN 933.
Why Choose Property Class 12.9 Steel for Sealing Screws with Bonded Washer
The highest common strength class, for high-load machine assembly. For sealing screws with bonded washer, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel sealing screws with bonded washer require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Sealing Screws with Bonded Washer, class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Sealing Screws with Bonded Washer Available in Property Class 12.9 Steel
| Thread size | Pitch (mm) | Across flats s (mm) | Head height k (mm) | Seal outer diameter (mm) | Seal thickness (mm) | Seal material | Common length range (mm) | Reference standard |
|---|---|---|---|---|---|---|---|---|
| M5 | 0.8 | 8 | 3.5 | 10 | 1.0 | NBR | 8~40 | DIN 933 + BS 4518 |
| M6 | 1.0 | 10 | 4.0 | 12 | 1.5 | NBR | 10~50 | DIN 933 + BS 4518 |
| M8 | 1.25 | 13 | 5.3 | 14 | 1.5 | NBR | 12~60 | DIN 933 + BS 4518 |
| M10 | 1.5 | 17 | 6.4 | 16 | 1.5 | NBR | 16~60 | DIN 933 + BS 4518 |
| M12 | 1.75 | 19 | 7.5 | 19 | 2.0 | NBR | 20~80 | DIN 933 + BS 4518 |
| M16 | 2.0 | 24 | 10.0 | 24 | 2.0 | NBR | 25~80 | DIN 933 + BS 4518 |
