Material specification page for sealing cap nuts in Property Class 8.8 Steel. Covers the grade designation (ISO 898-1 property class 8.8), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to DIN 1587.
Why Choose Property Class 8.8 Steel for Sealing Cap Nuts
The workhorse medium-carbon alloy class for structural joints. For sealing cap nuts, this matters when requires plating (zinc) for corrosion protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 8.8 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |
Corrosion Behavior in Service
Carbon and alloy steel sealing cap nuts require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Sealing Cap Nuts, class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Sealing Cap Nuts Available in Property Class 8.8 Steel
| Thread size | Pitch (mm) | Across flats s (mm) | Across corners e (mm) | Total height m (mm) | Dome diameter (mm) | O-ring seat | Reference standard |
|---|---|---|---|---|---|---|---|
| M5 | 0.8 | 8 | 8.79 | 10 | 8 | 4.5 x 1.5 NBR | DIN 1587 + O-ring |
| M6 | 1.0 | 10 | 11.05 | 12 | 10 | 5.5 x 1.5 NBR | DIN 1587 + O-ring |
| M8 | 1.25 | 13 | 14.38 | 15 | 13 | 7.5 x 2.0 NBR | DIN 1587 + O-ring |
| M10 | 1.5 | 17 | 18.90 | 18 | 17 | 9.5 x 2.0 NBR | DIN 1587 + O-ring |
| M12 | 1.75 | 19 | 21.10 | 22 | 19 | 11.5 x 2.0 NBR | DIN 1587 + O-ring |
| M16 | 2.0 | 24 | 26.75 | 28 | 24 | 15.5 x 2.5 NBR | DIN 1587 + O-ring |
