---
title: "Property Class 8.8 Steel Server Rack Screws and Cage-Nut Hardware"
description: "Property Class 8.8 Steel Server Rack Screws and Cage-Nut Hardware (ISO 898-1 property class 8.8): requires plating (zinc) for corrosion protection."
url: https://engineeringhardware.com/guide/material/grade-8-8-steel-server-rack-screws-and-cage-nut-hardware/
source: Engineering Hardware & Fasteners
---

# Property Class 8.8 Steel Server Rack Screws and Cage-Nut Hardware

Screws · Trade series (rack screws and cage-nut hardware)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

Property Class 8.8 Steel Server Rack Screws and Cage-Nut Hardware are supplied to ISO 898-1 property class 8.8. Corrosion behaviour is requires plating (zinc) for corrosion protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the workhorse medium-carbon alloy class for structural joints.

- **Grade:** ISO 898-1 property class 8.8
- **Corrosion resistance:** Requires plating (zinc) for corrosion protection
- **Magnetic response:** Magnetic
- **Service temperature:** commonly limited to approx. +300 °C; confirm against the coating and the load

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![Property Class 8.8 Steel Server Rack Screws and Cage-Nut Hardware reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Server-Rack-Screws-and-Cage-Nut-Hardware.webp)

Property Class 8.8 Steel (ISO 898-1 property class 8.8) is the workhorse medium-carbon alloy class for structural joints. Specified on server rack screws and cage-nut hardware it determines the corrosion behaviour (requires plating (zinc) for corrosion protection) and the service temperature range (commonly limited to approx. +300 °C; confirm against the coating and the load); the dimensions are ours rather than a standard's, and are listed in full below.

## Why Choose Property Class 8.8 Steel for Server Rack Screws and Cage-Nut Hardware

The workhorse medium-carbon alloy class for structural joints. For server rack screws and cage-nut hardware, this matters when requires plating (zinc) for corrosion protection is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 898-1 property class 8.8 |
| --- | --- |
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |

## Corrosion Behavior in Service

Carbon and alloy steel server rack screws and cage-nut hardware require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.

## Galvanic & Galling Considerations

For server rack screws and cage-nut hardware in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

## Sizes of Server Rack Screws and Cage-Nut Hardware Available in Property Class 8.8 Steel

| Thread family | Representative screw lengths | Nominal diameter / pitch | Head form | Mating hardware |
| --- | --- | --- | --- | --- |
| 10-32 | 3/8 / 1/2 / 5/8 in | about 3/16 in; 32 TPI | pan head | cage nut or threaded rack hole |
| 12-24 | 3/8 / 1/2 / 5/8 in | about 7/32 in; 24 TPI | pan head | cage nut or threaded rack hole |
| M6 | 10 / 16 mm | 6 mm; 1.0 pitch | pan head | cage nut or threaded rack hole |

Dimensions are independent of the material: every size above is available in Property Class 8.8 Steel.

Custom manufacturing · Made to drawing

## Need this screw in a grade that is not listed?

Grade 8 8 Steel is one of the grades the catalog describes. Lengths and thread lengths outside the standard table are the commonest request, followed by a drive the standard does not offer and a head marked with your own part number. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom screw manufacturing](https://engineeringhardware.com/custom/screws/)[Send a drawing](https://engineeringhardware.com/custom/screws/#rfq)

## Technical Drawing

Dimensioned line drawing of 10-32 Server Rack Screws and Cage-Nut Hardware to Trade series (rack screws and cage-nut hardware). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Representative screw lengths:** 3/8 / 1/2 / 5/8 in
- **Nominal diameter / pitch:** about 3/16 in; 32 TPI
- **Head form:** pan head
- **Mating hardware:** cage nut or threaded rack hole

## Dimensions & Specifications (Trade series (rack screws and cage-nut hardware))

| Thread family | Representative screw lengths | Nominal diameter / pitch | Head form | Mating hardware |
| --- | --- | --- | --- | --- |
| 10-32 | 3/8 / 1/2 / 5/8 in | about 3/16 in; 32 TPI | pan head | cage nut or threaded rack hole |
| 12-24 | 3/8 / 1/2 / 5/8 in | about 7/32 in; 24 TPI | pan head | cage nut or threaded rack hole |
| M6 | 10 / 16 mm | 6 mm; 1.0 pitch | pan head | cage nut or threaded rack hole |

Product catalog

## Related Server Rack Screws products

[![China Wholesale Galvanized Metal Hexagon Head Tek Wood Hex Self Drilling Screw with EPDM Washers Roofing Screw](https://img.engineeringhardware.com/China-Wholesale-Galvanized-Metal-Hexagon-Head-Tek-Wood-Hex-Self-Drilling-Screw-with-EPDM-Washers-Roofing-Screw-2.webp)](https://engineeringhardware.com/product/china-wholesale-galvanized-metal-hexagon-head-tek-wood-hex-self-drilling-screw-with/)

Self-Drilling & Tek Screws

### [China Wholesale Galvanized Metal Hexagon Head Tek Wood Hex Self Drilling Screw with EPDM Washers Roofing Screw](https://engineeringhardware.com/product/china-wholesale-galvanized-metal-hexagon-head-tek-wood-hex-self-drilling-screw-with/)

Ybts-001 · DIN

**US$0.024 – 0.048**MOQ 100,000 pieces

[![Hardware Fasteners DIN7504 Stainless Steel Hex Head Self Drilling Screw](https://img.engineeringhardware.com/Hardware-Fasteners-DIN7504-Stainless-Steel-Hex-Head-Self-Drilling-Screw-2.webp)](https://engineeringhardware.com/product/hardware-fasteners-din7504-stainless-steel-hex-head-self-drilling-screw-2/)

Self-Drilling & Tek Screws

### [Hardware Fasteners DIN7504 Stainless Steel Hex Head Self Drilling Screw](https://engineeringhardware.com/product/hardware-fasteners-din7504-stainless-steel-hex-head-self-drilling-screw-2/)

Countersunk Head · DIN, GB, ANSI, BSW, JIS, GOST

**US$1.18 – 1.87**MOQ 100 kilograms

[![Stainless Steel Galvanized Powder Coated Nickel Countersunk Head DIN7504p Self-Drilling Screw](https://img.engineeringhardware.com/Stainless-Steel-Galvanized-Powder-Coated-Nickel-Countersunk-Head-DIN7504p-Self-Drilling-Screw.webp)](https://engineeringhardware.com/product/stainless-steel-galvanized-powder-coated-nickel-countersunk-head-din7504p-self/)

Self-Drilling & Tek Screws

### [Stainless Steel Galvanized Powder Coated Nickel Countersunk Head DIN7504p Self-Drilling Screw](https://engineeringhardware.com/product/stainless-steel-galvanized-powder-coated-nickel-countersunk-head-din7504p-self/)

Stainless Steel · a Thread Ab Thread Machine Thread Cutting Thread

**US$0.0012 – 0.12**MOQ 1,000 pieces

[![Black Phosphated Bugle Head Drywall Screws Self Tapping Drilling Screws for Roofing/Wall/Wood](https://img.engineeringhardware.com/Black-Phosphated-Bugle-Head-Drywall-Screws-Self-Tapping-Drilling-Screws-for-Roofing-Wall-Wood.webp)](https://engineeringhardware.com/product/black-phosphated-bugle-head-drywall-screws-self-tapping-drilling-screws-for-roofing/)

Self-Drilling & Tek Screws

### [Black Phosphated Bugle Head Drywall Screws Self Tapping Drilling Screws for Roofing/Wall/Wood](https://engineeringhardware.com/product/black-phosphated-bugle-head-drywall-screws-self-tapping-drilling-screws-for-roofing/)

Common Nail · Steel

**US$45.60**MOQ 20 kilograms

[![SS304 Stainless Steel Flat Head Cross Self Drilling Wood Screw](https://img.engineeringhardware.com/SS304-Stainless-Steel-Flat-Head-Cross-Self-Drilling-Wood-Screw.webp)](https://engineeringhardware.com/product/ss304-stainless-steel-flat-head-cross-self-drilling-wood-screw/)

Self-Drilling & Tek Screws

### [SS304 Stainless Steel Flat Head Cross Self Drilling Wood Screw](https://engineeringhardware.com/product/ss304-stainless-steel-flat-head-cross-self-drilling-wood-screw/)

Hexagon Head · DIN, GB, ANSI, BSW, JIS, GOST

**US$0.06**MOQ 1,000 pieces

[![304 Stainless Steel Hex Head Self Drilling Screw with PVC Washer](https://img.engineeringhardware.com/304-Stainless-Steel-Hex-Head-Self-Drilling-Screw-with-PVC-Washer.webp)](https://engineeringhardware.com/product/304-stainless-steel-hex-head-self-drilling-screw-with-pvc-washer/)

Self-Drilling & Tek Screws

### [304 Stainless Steel Hex Head Self Drilling Screw with PVC Washer](https://engineeringhardware.com/product/304-stainless-steel-hex-head-self-drilling-screw-with-pvc-washer/)

Hex Head Self Drilling Screws · DIN, GB, GOST

**US$0.12 – 0.66**MOQ 1 piece

[View all Self-Drilling & Tek Screws →](https://engineeringhardware.com/fastener-products/screws/self-drilling-tek-screws/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

The sectors that buy Server Rack Screws and Cage-Nut Hardware, and the duty each one buys them for. Stocked from 10-32 to M6.

### Industries that specify Server Rack Screws and Cage-Nut Hardware

- **Audio racks:** 10-32 hardware is common where the rack is threaded for that system.
- **IT equipment:** M6 and 12-24 options cover different rack conventions.
- **Rack service:** Pan-head lengths suit front-panel and rail thickness.
- **Data centers:** Rack screws and cage nuts attach rails and equipment to cabinet posts.
- **Automotive & transport:** Chassis, driveline and body fixings that see vibration and are assembled to a controlled preload.
- **Steel fabrication:** Bolted connections in frames, enclosures, walkways and weldments, on the bench and on site.

### Typical applications

- selecting 3/8–5/8 in or 10/16 mm length
- using a cage nut in an unthreaded square rack hole
- keeping the screw thread family consistent across the cabinet
- matching 10-32, 12-24 or M6 to the rack system
- bolting brackets, motors and gearboxes to a frame
- assemblies that are dismantled for service and re-torqued

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Torque and preload:** The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together.

### Where to use something else

- Do not substitute 10-32, 12-24 and M6 by apparent diameter; their pitches are different and cross-threading damages the rack.
- Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material.

[Full application guide: where Server Rack Screws and Cage-Nut Hardware are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/server-rack-screws-and-cage-nut-hardware/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### When should I move from ISO 898-1 property class 8.8 to class 10.9 / 12.9 for Server Rack Screws and Cage-Nut Hardware?

Step up to class 10.9 / 12.9 when the joint preload approaches the proof load of the current class. The higher class adds preload at the same diameter, often saving size and weight.

### Is Property Class 8.8 Steel prone to hydrogen embrittlement?

Class 10.9 and above can be susceptible to hydrogen embrittlement when electroplated. Specify post-plating baking, or use mechanical-zinc / zinc-flake finishes which avoid the cathodic plating step.

### Which finish is best for outdoor Server Rack Screws and Cage-Nut Hardware?

For outdoor service in steel, hot-dip galvanizing gives the longest life; zinc-flake (Geomet/Delta-Tone family) gives a thinner film with excellent salt-spray performance; standard zinc plating is the lowest-cost option for general indoor / shielded outdoor use.

### What's the service temperature limit for Property Class 8.8 Steel?

The practical service range is commonly limited to approx. +300 °C; confirm against the coating and the load.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Server Rack Screws and Cage-Nut Hardware page](https://engineeringhardware.com/fastener/server-rack-screws-and-cage-nut-hardware/)

### More Server Rack Screws and Cage-Nut Hardware Guides