---
title: "Property Class 8.8 Steel Solderable SMT Nuts"
description: "Property Class 8.8 Steel Solderable SMT Nuts (ISO 898-1 property class 8.8): requires plating (zinc) for corrosion protection."
url: https://engineeringhardware.com/guide/material/grade-8-8-steel-solderable-smt-nuts/
source: Engineering Hardware & Fasteners
---

# Property Class 8.8 Steel Solderable SMT Nuts

Nuts · Trade series (solderable SMT nuts)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

Property Class 8.8 Steel Solderable SMT Nuts are supplied to ISO 898-1 property class 8.8. Corrosion behaviour is requires plating (zinc) for corrosion protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the workhorse medium-carbon alloy class for structural joints.

- **Grade:** ISO 898-1 property class 8.8
- **Corrosion resistance:** Requires plating (zinc) for corrosion protection
- **Magnetic response:** Magnetic
- **Service temperature:** commonly limited to approx. +300 °C; confirm against the coating and the load

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![Property Class 8.8 Steel Solderable SMT Nuts reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/PEM-SMT-Nuts.webp)

Property Class 8.8 Steel (ISO 898-1 property class 8.8) is the workhorse medium-carbon alloy class for structural joints. Specified on solderable smt nuts it determines the corrosion behaviour (requires plating (zinc) for corrosion protection) and the service temperature range (commonly limited to approx. +300 °C; confirm against the coating and the load); the dimensions are ours rather than a standard's, and are listed in full below.

## Why Choose Property Class 8.8 Steel for Solderable SMT Nuts

The workhorse medium-carbon alloy class for structural joints. For solderable smt nuts, this matters when requires plating (zinc) for corrosion protection is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 898-1 property class 8.8 |
| --- | --- |
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |

## Corrosion Behavior in Service

Carbon and alloy steel solderable smt nuts require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.

## Galvanic & Galling Considerations

For solderable smt nuts in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

## Sizes of Solderable SMT Nuts Available in Property Class 8.8 Steel

| Thread size | Material | Supply | Board installation | Adhesive spot |
| --- | --- | --- | --- | --- |
| M2 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M2.5 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M3 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M4 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M5 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |

Dimensions are independent of the material: every size above is available in Property Class 8.8 Steel.

Custom manufacturing · Made to drawing

## Need this nut in a grade that is not listed?

Grade 8 8 Steel is one of the grades the catalog describes. Locking method is specifiable independently of the rest: nylon insert, all-metal deformed thread, serrated flange, or none. Made by cold heading or tapping.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom nut manufacturing](https://engineeringhardware.com/custom/nuts/)[Send a drawing](https://engineeringhardware.com/custom/nuts/#rfq)

## Technical Drawing

Dimensioned line drawing of M2 Solderable SMT Nuts to Trade series (solderable SMT nuts). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Material:** tinned steel
- **Supply:** taped and reeled
- **Board installation:** solder into plated-through or non-plated hole
- **Adhesive spot:** with or without

## Dimensions & Specifications (Trade series (solderable SMT nuts))

| Thread size | Material | Supply | Board installation | Adhesive spot |
| --- | --- | --- | --- | --- |
| M2 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M2.5 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M3 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M4 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |
| M5 | tinned steel | taped and reeled | solder into plated-through or non-plated hole | with or without |

Product catalog

## Related Solderable SMT Nuts products

[![ASME B18.2.2 and ASTM A325 Hot-Dipped Galvanized Grade Dh Steel Heavy Hex Nut](https://img.engineeringhardware.com/ASME-B18-2-2-and-ASTM-A325-Hot-Dipped-Galvanized-Grade-Dh-Steel-Heavy-Hex-Nut.webp)](https://engineeringhardware.com/product/asme-b18-2-2-and-astm-a325-hot-dipped-galvanized-grade-dh-steel-heavy-hex-nut/)

Hex & Other Standard Nuts

### [ASME B18.2.2 and ASTM A325 Hot-Dipped Galvanized Grade Dh Steel Heavy Hex Nut](https://engineeringhardware.com/product/asme-b18-2-2-and-astm-a325-hot-dipped-galvanized-grade-dh-steel-heavy-hex-nut/)

Hexagon Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.012 – 0.036**MOQ 10,000 pieces

[![Stainless Steel 201 304 316L Fine Thread Coarse Thread Hex Nuts](https://img.engineeringhardware.com/Stainless-Steel-201-304-316L-Fine-Thread-Coarse-Thread-Hex-Nuts.webp)](https://engineeringhardware.com/product/stainless-steel-201-304-316l-fine-thread-coarse-thread-hex-nuts/)

Hex & Other Standard Nuts

### [Stainless Steel 201 304 316L Fine Thread Coarse Thread Hex Nuts](https://engineeringhardware.com/product/stainless-steel-201-304-316l-fine-thread-coarse-thread-hex-nuts/)

Hexagon Head · DIN

**US$1.19 – 35.88**MOQ 1 piece

[![SS304 SS316 DIN937 Hex Nuts Zinc Plated Ruspert Dacromet Customized Surface Treatment](https://img.engineeringhardware.com/SS304-SS316-DIN937-Hex-Nuts-Zinc-Plated-Ruspert-Dacromet-Customized-Surface-Treatment.webp)](https://engineeringhardware.com/product/ss304-ss316-din937-hex-nuts-zinc-plated-ruspert-dacromet-customized-surface-treatment/)

Hex & Other Standard Nuts

### [SS304 SS316 DIN937 Hex Nuts Zinc Plated Ruspert Dacromet Customized Surface Treatment](https://engineeringhardware.com/product/ss304-ss316-din937-hex-nuts-zinc-plated-ruspert-dacromet-customized-surface-treatment/)

Hexagon Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.012 – 0.14**MOQ 200 pieces

[![Your One-Stop Supplier Direct Factory Prices Stainless Steel Building Hardware OEM Nut](https://img.engineeringhardware.com/Your-One-Stop-Supplier-Direct-Factory-Prices-Stainless-Steel-Building-Hardware-OEM-Nut.webp)](https://engineeringhardware.com/product/your-one-stop-supplier-direct-factory-prices-stainless-steel-building-hardware-oem/)

Hex & Other Standard Nuts

### [Your One-Stop Supplier Direct Factory Prices Stainless Steel Building Hardware OEM Nut](https://engineeringhardware.com/product/your-one-stop-supplier-direct-factory-prices-stainless-steel-building-hardware-oem/)

Znic Plating · Cold-Heading

**US$0.012 – 0.024**MOQ 5,000 pieces

[![Factory Sale ASME B18.2.2 Zinc Finish HDG Finish Dacromet A194 2h Gr8 Heavy Hex Hexagon Nut Hex Nut](https://img.engineeringhardware.com/Factory-Sale-ASME-B18-2-2-Zinc-Finish-HDG-Finish-Dacromet-A194-2h-Gr8-Heavy-Hex-Hexagon-Nut-Hex-Nut.webp)](https://engineeringhardware.com/product/factory-sale-asme-b18-2-2-zinc-finish-hdg-finish-dacromet-a194-2h-gr8-heavy-hex/)

Hex & Other Standard Nuts

### [Factory Sale ASME B18.2.2 Zinc Finish HDG Finish Dacromet A194 2h Gr8 Heavy Hex Hexagon Nut Hex Nut](https://engineeringhardware.com/product/factory-sale-asme-b18-2-2-zinc-finish-hdg-finish-dacromet-a194-2h-gr8-heavy-hex/)

Hexagon Head · DIN, ANSI, GB, JIS, BSW, GOST

**US$0.012**MOQ 10 pieces

[![Epman -4PCS/Set Spike Shape Auto Bicycle Tire Valve Cap Valve Stem Caps Wheel Rims Lug Nuts Tk-Qmz950](https://img.engineeringhardware.com/Epman-4PCS-Set-Spike-Shape-Auto-Bicycle-Tire-Valve-Cap-Valve-Stem-Caps-Wheel-Rims-Lug-Nuts-Tk-Qmz950.webp)](https://engineeringhardware.com/product/epman-4pcs-set-spike-shape-auto-bicycle-tire-valve-cap-valve-stem-caps-wheel-rims/)

Hex & Other Standard Nuts

### [Epman -4PCS/Set Spike Shape Auto Bicycle Tire Valve Cap Valve Stem Caps Wheel Rims Lug Nuts Tk-Qmz950](https://engineeringhardware.com/product/epman-4pcs-set-spike-shape-auto-bicycle-tire-valve-cap-valve-stem-caps-wheel-rims/)

Tire Valve Caps · Aluminum

**US$1.30 – 1.44**MOQ 100 pieces

[View all Hex & Other Standard Nuts →](https://engineeringhardware.com/fastener-products/nuts/hex-other-standard-nuts/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

Where Solderable SMT Nuts are used, and what decides the specification in each case. Stocked from M2 to M5.

### Industries that specify Solderable SMT Nuts

- **PCB production:** Solderable nuts add threaded mounting points during board assembly.
- **Consumer electronics:** Tape-and-reel supply supports high-volume board placement.
- **Control electronics:** M2–M5 threads secure shields and board-mounted brackets.
- **Instrument modules:** Optional adhesive spots help hold the part during soldering.
- **Machine building & OEM:** The clamping counter-face on studs and bolts throughout an assembly.
- **Steel fabrication:** Bolted structural and frame connections.

### Typical applications

- soldering a fine threaded nut into a plated or non-plated board hole
- selecting M2 through M5 for the mating screw
- using taped-and-reeled placement in production
- choosing with or without an adhesive spot
- joints re-torqued at a service interval
- completing a bolted joint on a stud, rod or bolt

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Match the class:** A nut below the bolt property class strips before the bolt reaches its own limit — pair class 8 nuts with 8.8 bolts, class 10 with 10.9.

### Where to use something else

- Do not size the nut from the screw alone; the board hole, solder land and reflow process must accept the part.

[Full application guide: where Solderable SMT Nuts are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/solderable-smt-nuts/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### Is Property Class 8.8 Steel prone to hydrogen embrittlement?

Class 10.9 and above can be susceptible to hydrogen embrittlement when electroplated. Specify post-plating baking, or use mechanical-zinc / zinc-flake finishes which avoid the cathodic plating step.

### Which finish is best for outdoor Solderable SMT Nuts?

For outdoor service in steel, hot-dip galvanizing gives the longest life; zinc-flake (Geomet/Delta-Tone family) gives a thinner film with excellent salt-spray performance; standard zinc plating is the lowest-cost option for general indoor / shielded outdoor use.

### What's the service temperature limit for Property Class 8.8 Steel?

The practical service range is commonly limited to approx. +300 °C; confirm against the coating and the load.

### Can Property Class 8.8 Steel replace stainless steel structurally?

No — stainless A2/A4 cannot match class 10.9 / 12.9 strength. Stainless is selected for corrosion, not raw strength.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Solderable SMT Nuts page](https://engineeringhardware.com/fastener/solderable-smt-nuts/)

### More Solderable SMT Nuts Guides
