---
title: "Property Class 8.8 Steel Tee Nuts (Pronged Insert Nuts)"
description: "Property Class 8.8 Steel Tee Nuts (Pronged Insert Nuts) (ISO 898-1 property class 8.8): requires plating (zinc) for corrosion protection."
url: https://engineeringhardware.com/guide/material/grade-8-8-steel-tee-nuts/
source: Engineering Hardware & Fasteners
---

# Property Class 8.8 Steel Tee Nuts (Pronged Insert Nuts)

Nuts · Trade series (pronged T-nut)

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

Property Class 8.8 Steel Tee Nuts (Pronged Insert Nuts) are supplied to ISO 898-1 property class 8.8. Corrosion behaviour is requires plating (zinc) for corrosion protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the workhorse medium-carbon alloy class for structural joints.

- **Grade:** ISO 898-1 property class 8.8
- **Corrosion resistance:** Requires plating (zinc) for corrosion protection
- **Magnetic response:** Magnetic
- **Service temperature:** commonly limited to approx. +300 °C; confirm against the coating and the load

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![Property Class 8.8 Steel Tee Nuts (Pronged Insert Nuts) reference image](https://engineeringhardware.com/wp-content/uploads/2026/08/Tee-Nuts-T-Nuts.webp)

Property Class 8.8 Steel (ISO 898-1 property class 8.8) is the workhorse medium-carbon alloy class for structural joints. Specified on tee nuts (pronged insert nuts) it determines the corrosion behaviour (requires plating (zinc) for corrosion protection) and the service temperature range (commonly limited to approx. +300 °C; confirm against the coating and the load); the dimensions are ours rather than a standard's, and are listed in full below.

## Why Choose Property Class 8.8 Steel for Tee Nuts (Pronged Insert Nuts)

The workhorse medium-carbon alloy class for structural joints. For tee nuts (pronged insert nuts), this matters when requires plating (zinc) for corrosion protection is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 898-1 property class 8.8 |
| --- | --- |
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |

## Corrosion Behavior in Service

Carbon and alloy steel tee nuts (pronged insert nuts) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.

## Galvanic & Galling Considerations

For tee nuts (pronged insert nuts) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

## Sizes of Tee Nuts (Pronged Insert Nuts) Available in Property Class 8.8 Steel

| Thread size | Barrel diameter (mm) | Barrel length (mm) | Flange diameter (mm) | Prongs | Drill hole in timber (mm) | Material | Finish |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M4 | 7.0 | 9.0 | 17.0 | 4 | 7.0 | Mild steel | Zinc plated |
| M5 | 8.0 | 9.0 | 19.0 | 4 | 8.0 | Mild steel | Zinc plated |
| M6 | 9.0 | 11.0 | 22.0 | 4 | 9.0 | Mild steel | Zinc plated |
| M8 | 11.0 | 13.0 | 25.0 | 4 | 11.0 | Mild steel | Zinc plated |
| M10 | 13.0 | 13.0 | 30.0 | 4 | 13.0 | Mild steel | Zinc plated |

Dimensions are independent of the material: every size above is available in Property Class 8.8 Steel.

Custom manufacturing · Made to drawing

## Need this nut in a grade that is not listed?

Grade 8 8 Steel is one of the grades the catalog describes. Thread, height, across-flats, property class, locking feature and flange form can all be varied, including thread sizes the standard series does not run to. Made by cold heading or tapping.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom nut manufacturing](https://engineeringhardware.com/custom/nuts/)[Send a drawing](https://engineeringhardware.com/custom/nuts/#rfq)

## Technical Drawing

Dimensioned line drawing of M4 Tee Nuts (Pronged Insert Nuts) to Trade series (pronged T-nut). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Barrel diameter (mm):** 7.0
- **Barrel length (mm):** 9.0
- **Flange diameter (mm):** 17.0
- **Prongs:** 4
- **Drill hole in timber (mm):** 7.0
- **Material:** Mild steel
- **Finish:** Zinc plated

## Dimensions & Specifications (Trade series (pronged T-nut))

| Thread size | Barrel diameter (mm) | Barrel length (mm) | Flange diameter (mm) | Prongs | Drill hole in timber (mm) | Material | Finish |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M4 | 7.0 | 9.0 | 17.0 | 4 | 7.0 | Mild steel | Zinc plated |
| M5 | 8.0 | 9.0 | 19.0 | 4 | 8.0 | Mild steel | Zinc plated |
| M6 | 9.0 | 11.0 | 22.0 | 4 | 9.0 | Mild steel | Zinc plated |
| M8 | 11.0 | 13.0 | 25.0 | 4 | 11.0 | Mild steel | Zinc plated |
| M10 | 13.0 | 13.0 | 30.0 | 4 | 13.0 | Mild steel | Zinc plated |

Product catalog

## Related Tee Nuts products

[![Steel M6 (8S-30) Roll-in T Nuts with Ball Spring for Aluminum Profile#5441](https://img.engineeringhardware.com/Steel-M6-8S-30-Roll-in-T-Nuts-with-Ball-Spring-for-Aluminum-Profile-5441.webp)](https://engineeringhardware.com/product/steel-m6-8s-30-roll-in-t-nuts-with-ball-spring-for-aluminum-profile-5441/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [Steel M6 (8S-30) Roll-in T Nuts with Ball Spring for Aluminum Profile#5441](https://engineeringhardware.com/product/steel-m6-8s-30-roll-in-t-nuts-with-ball-spring-for-aluminum-profile-5441/)

T Head · ISO

**US$0.21 – 0.25**MOQ 1 piece

[![DIN 1624 Tee Claw Nut Zinc Plated Four Prongs T Nut for Wood Insert](https://img.engineeringhardware.com/DIN-1624-Tee-Claw-Nut-Zinc-Plated-Four-Prongs-T-Nut-for-Wood-Insert.webp)](https://engineeringhardware.com/product/din-1624-tee-claw-nut-zinc-plated-four-prongs-t-nut-for-wood-insert/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [DIN 1624 Tee Claw Nut Zinc Plated Four Prongs T Nut for Wood Insert](https://engineeringhardware.com/product/din-1624-tee-claw-nut-zinc-plated-four-prongs-t-nut-for-wood-insert/)

T Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.096 – 0.12**MOQ 10,000 pieces

[![Aluminum Profile Accessory 8 Slot Locking T Nut Steel M5/M6/M8 Thread T Slot Nut with Spring Leaf](https://img.engineeringhardware.com/Aluminum-Profile-Accessory-8-Slot-Locking-T-Nut-Steel-M5-M6-M8-Thread-T-Slot-Nut-with-Spring-Leaf.webp)](https://engineeringhardware.com/product/aluminum-profile-accessory-8-slot-locking-t-nut-steel-m5-m6-m8-thread-t-slot-nut/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [Aluminum Profile Accessory 8 Slot Locking T Nut Steel M5/M6/M8 Thread T Slot Nut with Spring Leaf](https://engineeringhardware.com/product/aluminum-profile-accessory-8-slot-locking-t-nut-steel-m5-m6-m8-thread-t-slot-nut/)

Hexagon Head · Stainless Steel

**US$6.00 – 36.00**MOQ 10 tons

[![40cr/42CrMo Alloy Steel Er/Sk/Oz/Er Chuck/CNC Tool Holder/Er Collet Nut Manufacture for CNC Machining Center/CNC Milling Machine/Engraving Machine](https://img.engineeringhardware.com/40cr-42CrMo-Alloy-Steel-Er-Sk-Oz-Er-Chuck-CNC-Tool-Holder-Er-Collet-Nut-Manufacture-for-CNC-Machining-Center-CNC-Milling-Machine-Engraving-Machine.webp)](https://engineeringhardware.com/product/40cr-42crmo-alloy-steel-er-sk-oz-er-chuck-cnc-tool-holder-er-collet-nut-manufacture/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [40cr/42CrMo Alloy Steel Er/Sk/Oz/Er Chuck/CNC Tool Holder/Er Collet Nut Manufacture for CNC Machining Center/CNC Milling Machine/Engraving Machine](https://engineeringhardware.com/product/40cr-42crmo-alloy-steel-er-sk-oz-er-chuck-cnc-tool-holder-er-collet-nut-manufacture/)

Pull Stud/Nut/Spanner · Alloy Steel

**US$1.20 – 3.60**MOQ 1 piece

[![Hardware Factory Custom Fastener Stainless Steel Locking Roll Ball Nuts Titanium Spring Loaded Tee T Slot Nut](https://img.engineeringhardware.com/Hardware-Factory-Custom-Fastener-Stainless-Steel-Locking-Roll-Ball-Nuts-Titanium-Spring-Loaded-Tee-T-Slot-Nut.webp)](https://engineeringhardware.com/product/hardware-factory-custom-fastener-stainless-steel-locking-roll-ball-nuts-titanium/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [Hardware Factory Custom Fastener Stainless Steel Locking Roll Ball Nuts Titanium Spring Loaded Tee T Slot Nut](https://engineeringhardware.com/product/hardware-factory-custom-fastener-stainless-steel-locking-roll-ball-nuts-titanium/)

T Head · DIN

**US$0.12 – 0.24**MOQ 1,000 pieces

[![110049npw Hitsert M8 Brass Insert Nut China Supplier](https://img.engineeringhardware.com/110049npw-Hitsert-M8-Brass-Insert-Nut-China-Supplier.webp)](https://engineeringhardware.com/product/110049npw-hitsert-m8-brass-insert-nut-china-supplier/)

T-Nuts, Slot Nuts & Channel Spring Nuts

### [110049npw Hitsert M8 Brass Insert Nut China Supplier](https://engineeringhardware.com/product/110049npw-hitsert-m8-brass-insert-nut-china-supplier/)

Round Head · DIN, ANSI, GB, JIS, GOST, BSW, OEM

**US$0.0012**MOQ 1,000 pieces

[View all T-Nuts, Slot Nuts & Channel Spring Nuts →](https://engineeringhardware.com/fastener-products/nuts/t-nuts-slot-nuts-channel-spring-nuts/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

Where Tee Nuts are used, and what decides the specification in each case. Stocked from M4 to M10.

### Industries that specify Tee Nuts

- **Climbing walls & play equipment:** The standard fixing for bolt-on holds in plywood.
- **Speaker cabinets & staging:** Threads in board that take repeated handling.
- **Furniture & flat-pack:** Knock-down joints assembled and re-assembled.
- **Maintenance & MRO:** Replacements matched to the existing bolt class, thread and finish.
- **Building services:** Threaded rod, channel and suspension assemblies.
- **Machine building & OEM:** The clamping counter-face on studs and bolts throughout an assembly.

### Typical applications

- prongs stop the nut turning when the bolt is tightened
- drill to the barrel size, not to the thread size
- putting a machine thread into plywood, MDF or solid timber
- locking an adjustment so it cannot drift
- joints re-torqued at a service interval
- completing a bolted joint on a stud, rod or bolt

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Match the class:** A nut below the bolt property class strips before the bolt reaches its own limit — pair class 8 nuts with 8.8 bolts, class 10 with 10.9.

[Full application guide: where Tee Nuts are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/tee-nuts/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What corrosion resistance do Property Class 8.8 Steel Tee Nuts (Pronged Insert Nuts) offer?

Property Class 8.8 Steel Tee Nuts (Pronged Insert Nuts) provide requires plating (zinc) for corrosion protection with a service range of commonly limited to approx. +300 °C; confirm against the coating and the load.

### When should I move from ISO 898-1 property class 8.8 to class 10.9 / 12.9 for Tee Nuts (Pronged Insert Nuts)?

Step up to class 10.9 / 12.9 when the joint preload approaches the proof load of the current class. The higher class adds preload at the same diameter, often saving size and weight.

### Is Property Class 8.8 Steel prone to hydrogen embrittlement?

Class 10.9 and above can be susceptible to hydrogen embrittlement when electroplated. Specify post-plating baking, or use mechanical-zinc / zinc-flake finishes which avoid the cathodic plating step.

### Which finish is best for outdoor Tee Nuts (Pronged Insert Nuts)?

For outdoor service in steel, hot-dip galvanizing gives the longest life; zinc-flake (Geomet/Delta-Tone family) gives a thinner film with excellent salt-spray performance; standard zinc plating is the lowest-cost option for general indoor / shielded outdoor use.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Tee Nuts (Pronged Insert Nuts) page](https://engineeringhardware.com/fastener/tee-nuts/)

### More Tee Nuts (Pronged Insert Nuts) Guides