---
title: "Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985)"
description: "Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985) (ISO 898-1 property class 8.8): requires plating (zinc) for corrosion protection."
url: https://engineeringhardware.com/guide/material/grade-8-8-steel-thin-nyloc-nuts-din-985/
source: Engineering Hardware & Fasteners
---

# Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985)

Nuts · DIN 985

Mechanical properties, corrosion behaviour and the full dimensional range for this grade.

Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985) are supplied to ISO 898-1 property class 8.8. Corrosion behaviour is requires plating (zinc) for corrosion protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the workhorse medium-carbon alloy class for structural joints.

- **Grade:** ISO 898-1 property class 8.8
- **Corrosion resistance:** Requires plating (zinc) for corrosion protection
- **Magnetic response:** Magnetic
- **Service temperature:** commonly limited to approx. +300 °C; confirm against the coating and the load

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985) reference image](https://engineeringhardware.com/wp-content/uploads/2026/06/112-Nylon-Insert-Hex-Lock-Nut-Type-2-—-GB／T-6182-／-ISO-10513-Series-051-—-GB／T-6182-／-ISO-10513.webp)

Material specification page for thin nylon insert lock nuts (din 985) in Property Class 8.8 Steel. Covers the grade designation (ISO 898-1 property class 8.8), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to DIN 985.

## Why Choose Property Class 8.8 Steel for Thin Nylon Insert Lock Nuts (DIN 985)

The workhorse medium-carbon alloy class for structural joints. For thin nylon insert lock nuts (din 985), this matters when requires plating (zinc) for corrosion protection is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | ISO 898-1 property class 8.8 |
| --- | --- |
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |

## Corrosion Behavior in Service

Carbon and alloy steel thin nylon insert lock nuts (din 985) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.

## Comparable Grades

For Thin Nylon Insert Lock Nuts (DIN 985), class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.

## Sizes of Thin Nylon Insert Lock Nuts (DIN 985) Available in Property Class 8.8 Steel

| Thread size | Pitch (mm) | Width across flats s (mm) | Total height m (mm) | Max service temperature (u00b0C) | Re-use | Property class | Reference standard |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M5 | 0.8 | 8.0 | 5.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M6 | 1.0 | 10.0 | 6.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M8 | 1.25 | 13.0 | 8.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M10 | 1.5 | 17.0 | 10.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M12 | 1.75 | 19.0 | 12.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M16 | 2.0 | 24.0 | 16.0 | 120 | 5 cycles typical | 8 | DIN 985 |

Dimensions are independent of the material: every size above is available in Property Class 8.8 Steel.

Custom manufacturing · Made to drawing

## Need this nut in a grade that is not listed?

Grade 8 8 Steel is one of the grades the catalog describes. Thread size is the obvious variable and rarely the interesting one — height for clearance, across-flats for the tool already in the cell, and the locking feature for the vibration actually present. Made by cold heading or tapping.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom nut manufacturing](https://engineeringhardware.com/custom/nuts/)[Send a drawing](https://engineeringhardware.com/custom/nuts/#rfq)

## Technical Drawing

Dimensioned line drawing of M5 Thin Nylon Insert Lock Nuts (DIN 985) to DIN 985. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Pitch (mm):** 0.8
- **Width across flats s (mm):** 8.0
- **Total height m (mm):** 5.0
- **Max service temperature (u00b0C):** 120
- **Re-use:** 5 cycles typical
- **Property class:** 8

## Dimensions & Specifications (DIN 985)

| Thread size | Pitch (mm) | Width across flats s (mm) | Total height m (mm) | Max service temperature (u00b0C) | Re-use | Property class | Reference standard |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M5 | 0.8 | 8.0 | 5.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M6 | 1.0 | 10.0 | 6.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M8 | 1.25 | 13.0 | 8.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M10 | 1.5 | 17.0 | 10.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M12 | 1.75 | 19.0 | 12.0 | 120 | 5 cycles typical | 8 | DIN 985 |
| M16 | 2.0 | 24.0 | 16.0 | 120 | 5 cycles typical | 8 | DIN 985 |

Product catalog

## Related Nyloc Lock Nuts products

[![Custom OEM Hex Flange Lock Nut Precision CNC Machined Standard Nut Manufacturer](https://img.engineeringhardware.com/Custom-OEM-Hex-Flange-Lock-Nut-Precision-CNC-Machined-Standard-Nut-Manufacturer.webp)](https://engineeringhardware.com/product/custom-oem-hex-flange-lock-nut-precision-cnc-machined-standard-nut-manufacturer/)

Nylon-Insert & All-Metal Lock Nuts

### [Custom OEM Hex Flange Lock Nut Precision CNC Machined Standard Nut Manufacturer](https://engineeringhardware.com/product/custom-oem-hex-flange-lock-nut-precision-cnc-machined-standard-nut-manufacturer/)

DIN, GB, ANSI · Stainless Steel

**US$1.20**MOQ 100 pieces

[![Lock Nut / Round Nut / Slotted Nut / DIN981 / Km](https://img.engineeringhardware.com/Lock-Nut-Round-Nut-Slotted-Nut-DIN981-Km.webp)](https://engineeringhardware.com/product/lock-nut-round-nut-slotted-nut-din981-km/)

Nylon-Insert & All-Metal Lock Nuts

### [Lock Nut / Round Nut / Slotted Nut / DIN981 / Km](https://engineeringhardware.com/product/lock-nut-round-nut-slotted-nut-din981-km/)

DIN, ANSI, GB, JIS, GOST, BSW · Carbon Steel A3. Stainless Steel ANSI…

**US$0.096 – 0.12**MOQ 5,000 pieces

[![Stainless Steel Hex Lock Nut DIN985 Made in China](https://img.engineeringhardware.com/Stainless-Steel-Hex-Lock-Nut-DIN985-Made-in-China.webp)](https://engineeringhardware.com/product/stainless-steel-hex-lock-nut-din985-made-in-china/)

Nylon-Insert & All-Metal Lock Nuts

### [Stainless Steel Hex Lock Nut DIN985 Made in China](https://engineeringhardware.com/product/stainless-steel-hex-lock-nut-din985-made-in-china/)

Hexagon Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.0012 – 0.006**MOQ 10,000 pieces

[![DIN985 Standard Nylon Lock Nut Features Embedded Nylon Collar for Excellent Vibration Resistance](https://img.engineeringhardware.com/DIN985-Standard-Nylon-Lock-Nut-Features-Embedded-Nylon-Collar-for-Excellent-Vibration-Resistance.webp)](https://engineeringhardware.com/product/din985-standard-nylon-lock-nut-features-embedded-nylon-collar-for-excellent/)

Nylon-Insert & All-Metal Lock Nuts

### [DIN985 Standard Nylon Lock Nut Features Embedded Nylon Collar for Excellent Vibration Resistance](https://engineeringhardware.com/product/din985-standard-nylon-lock-nut-features-embedded-nylon-collar-for-excellent/)

DIN, GB · Stainless Steel

**US$0.18 – 998.40**MOQ 2,000 pieces

[![M4 M5 Stainless Steel 304 316 Lock Nut Kep Nut with External Tooth Washer](https://img.engineeringhardware.com/M4-M5-Stainless-Steel-304-316-Lock-Nut-Kep-Nut-with-External-Tooth-Washer.webp)](https://engineeringhardware.com/product/m4-m5-stainless-steel-304-316-lock-nut-kep-nut-with-external-tooth-washer/)

Nylon-Insert & All-Metal Lock Nuts

### [M4 M5 Stainless Steel 304 316 Lock Nut Kep Nut with External Tooth Washer](https://engineeringhardware.com/product/m4-m5-stainless-steel-304-316-lock-nut-kep-nut-with-external-tooth-washer/)

Hexagon Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.096 – 0.60**MOQ 10,000 pieces

[![High Quality Bearing Km Series Lock Nut Suppliers Km40 Series MB Series](https://img.engineeringhardware.com/High-Quality-Bearing-Km-Series-Lock-Nut-Suppliers-Km40-Series-MB-Series.webp)](https://engineeringhardware.com/product/high-quality-bearing-km-series-lock-nut-suppliers-km40-series-mb-series/)

Nylon-Insert & All-Metal Lock Nuts

### [High Quality Bearing Km Series Lock Nut Suppliers Km40 Series MB Series](https://engineeringhardware.com/product/high-quality-bearing-km-series-lock-nut-suppliers-km40-series-mb-series/)

Hexagon Head · DIN, ANSI, GB, JIS, GOST, BSW, ISO

**US$0.06 – 0.12**MOQ 1,000 pieces

[View all Nylon-Insert & All-Metal Lock Nuts →](https://engineeringhardware.com/fastener-products/nuts/nylon-insert-all-metal-lock-nuts/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries

The sectors that buy Thin Nylon Insert Lock Nuts to DIN 985, and the duty each one buys them for. Stocked from M5 to M16.

### Industries that specify Thin Nylon Insert Lock Nuts

- **Maintenance & MRO:** Replacements matched to the existing bolt class, thread and finish.
- **Building services:** Threaded rod, channel and suspension assemblies.
- **Machine building & OEM:** The clamping counter-face on studs and bolts throughout an assembly.
- **Steel fabrication:** Bolted structural and frame connections.
- **Automotive & transport:** Vibration-prone joints where the locking type is specified on the drawing.

### Typical applications

- locking an adjustment so it cannot drift
- joints re-torqued at a service interval
- completing a bolted joint on a stud, rod or bolt

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- **Temperature ceiling:** The polymer feature sets the limit, not the steel: nylon softens above roughly 120 °C, so an all-metal locking type is the correct choice on hot assemblies.
- **Vibration:** Specified where cyclic load would loosen a plain nut or screw — rotating plant, rail, mobile equipment and anything that is not re-torqued in service.

[Full application guide: where Thin Nylon Insert Lock Nuts are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/thin-nyloc-nuts-din-985/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What's the service temperature limit for Property Class 8.8 Steel?

The practical service range is commonly limited to approx. +300 °C; confirm against the coating and the load.

### Can Property Class 8.8 Steel replace stainless steel structurally?

No — stainless A2/A4 cannot match class 10.9 / 12.9 strength. Stainless is selected for corrosion, not raw strength.

### Are Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985) magnetic?

Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985) are magnetic.

### What corrosion resistance do Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985) offer?

Property Class 8.8 Steel Thin Nylon Insert Lock Nuts (DIN 985) provide requires plating (zinc) for corrosion protection with a service range of commonly limited to approx. +300 °C; confirm against the coating and the load.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Thin Nylon Insert Lock Nuts (DIN 985) page](https://engineeringhardware.com/fastener/thin-nyloc-nuts-din-985/)

### More Thin Nylon Insert Lock Nuts (DIN 985) Guides