---
title: "NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants"
description: "NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants (acrylonitrile-butadiene rubber, typically 70 Shore A): good resistance to mineral oil, grease and"
url: https://engineeringhardware.com/guide/material/nbr-anaerobic-threadlockers/
source: Engineering Hardware & Fasteners
---

# NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants

Seals · Trade series (anaerobic adhesives for threaded assemblies)

Temperature range, chemical and fluid compatibility, hardness and the full dimensional range for this compound.

NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants are supplied to acrylonitrile-butadiene rubber, typically 70 Shore A. Corrosion behaviour is good resistance to mineral oil, grease and hydraulic fluid; poor in ozone and weathering, the material is non-magnetic, and the usable service range is approx. -30 °C to +100 °C. In practice this grade is the default elastomer for oil and hydraulic sealing.

- **Grade:** acrylonitrile-butadiene rubber, typically 70 Shore A
- **Corrosion resistance:** Good resistance to mineral oil, grease and hydraulic fluid; poor in ozone and weathering
- **Magnetic response:** Non-magnetic
- **Service temperature:** approx. -30 °C to +100 °C

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Anaerobic-Threadlockers.webp)

Material page for anaerobic threadlockers and thread sealants in NBR (Nitrile) (acrylonitrile-butadiene rubber, typically 70 Shore A). The sizes below are the ones we supply; there is no published dimensional standard for this article, so the table rather than a standard number is what to quote. Corrosion behaviour is good resistance to mineral oil, grease and hydraulic fluid; poor in ozone and weathering and the service range is approx. -30 °C to +100 °C.

## Why Choose NBR (Nitrile) for Anaerobic Threadlockers and Thread Sealants

The default elastomer for oil and hydraulic sealing. For anaerobic threadlockers and thread sealants, this matters when good resistance to mineral oil, grease and hydraulic fluid; poor in ozone and weathering is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | acrylonitrile-butadiene rubber, typically 70 Shore A |
| --- | --- |
| Magnetic response | Non-magnetic |
| Service temperature | approx. -30 °C to +100 °C |
| Corrosion characteristic | Good resistance to mineral oil, grease and hydraulic fluid; poor in ozone and weathering |

## Corrosion Behavior in Service

Carbon and alloy steel anaerobic threadlockers and thread sealants require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.

## Comparable Grades

For anaerobic threadlockers and thread sealants, consider FKM where temperature or chemical exposure is higher, or EPDM where the medium is water, steam or brake fluid rather than oil. Elastomer selection is decided by the medium, the temperature range and whether the seal is static or dynamic — not by strength.

## Sizes of Anaerobic Threadlockers and Thread Sealants Available in NBR (Nitrile)

| Grade | Removal | Typical use | Notes |
| --- | --- | --- | --- |
| low strength | hand tools | set screws, adjusting screws, small fasteners | up to about M12 |
| medium strength | hand tools | general assembly, machine screws | the usual default |
| high strength | heat and hand tools | studs, permanent assemblies | not for parts serviced in the field |
| thread sealant grade | hand tools | tapered pipe threads, hydraulic fittings | seals rather than locks |
| retaining compound | heat | bearings, bushes, cylindrical fits | not a thread product |

Dimensions are independent of the material: every size above is available in NBR (Nitrile).

Custom manufacturing · Made to drawing

## Need this seal in a grade that is not listed?

Nbr is one of the grades the catalog describes. A special seal is almost always a compound change rather than a size change — the same dimensions in a material that survives the medium.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom seal manufacturing](https://engineeringhardware.com/custom/seals/)[Send a drawing](https://engineeringhardware.com/custom/seals/#rfq)

## Technical Drawing

Dimensioned line drawing of low strength Anaerobic Threadlockers and Thread Sealants to Trade series (anaerobic adhesives for threaded assemblies). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Removal:** hand tools
- **Typical use:** set screws, adjusting screws, small fasteners
- **Notes:** up to about M12

## Dimensions & Specifications (Trade series (anaerobic adhesives for threaded assemblies))

| Grade | Removal | Typical use | Notes |
| --- | --- | --- | --- |
| low strength | hand tools | set screws, adjusting screws, small fasteners | up to about M12 |
| medium strength | hand tools | general assembly, machine screws | the usual default |
| high strength | heat and hand tools | studs, permanent assemblies | not for parts serviced in the field |
| thread sealant grade | hand tools | tapered pipe threads, hydraulic fittings | seals rather than locks |
| retaining compound | heat | bearings, bushes, cylindrical fits | not a thread product |

Product catalog

## Related Thread Sealants & Threadlockers products

[![M2 M3 M4 M5 M6 M8 Acme Steel Self Tapping Threaded Insert Bushing 302 Slotted Screw Wire Repair Left Hand Brass Thread Insert](https://img.engineeringhardware.com/M2-M3-M4-M5-M6-M8-Acme-Steel-Self-Tapping-Threaded-Insert-Bushing-302-Slotted-Screw-Wire-Repair-Left-Hand-Brass-Thread-Insert.webp)](https://engineeringhardware.com/product/m2-m3-m4-m5-m6-m8-acme-steel-self-tapping-threaded-insert-bushing-302-slotted-screw/)

Thread Repair & Solid Threaded Inserts

### [M2 M3 M4 M5 M6 M8 Acme Steel Self Tapping Threaded Insert Bushing 302 Slotted Screw Wire Repair Left Hand Brass Thread Insert](https://engineeringhardware.com/product/m2-m3-m4-m5-m6-m8-acme-steel-self-tapping-threaded-insert-bushing-302-slotted-screw/)

Common · Carbon Steel

**US$0.06 – 0.24**MOQ 1,000 pieces

[![Wyk CNC Indexable Metric Carbide Threaded Inserts for Threaded Lathe Fixture Inserts](https://img.engineeringhardware.com/Wyk-CNC-Indexable-Metric-Carbide-Threaded-Inserts-for-Threaded-Lathe-Fixture-Inserts.webp)](https://engineeringhardware.com/product/wyk-cnc-indexable-metric-carbide-threaded-inserts-for-threaded-lathe-fixture-inserts/)

Thread Repair & Solid Threaded Inserts

### [Wyk CNC Indexable Metric Carbide Threaded Inserts for Threaded Lathe Fixture Inserts](https://engineeringhardware.com/product/wyk-cnc-indexable-metric-carbide-threaded-inserts-for-threaded-lathe-fixture-inserts/)

DIN, GB, JIS · Tungsten Carbide

**US$9.36 – 222.00**MOQ 10 pieces

[![Hongniu Fasteners Stainless Steel Knurl Insert Round Nut M3-M12 Threaded Insert Nut for Wood, Plastic, Metal](https://img.engineeringhardware.com/Hongniu-Fasteners-Stainless-Steel-Knurl-Insert-Round-Nut-M3-M12-Threaded-Insert-Nut-for-Wood-Plastic-Metal.webp)](https://engineeringhardware.com/product/hongniu-fasteners-stainless-steel-knurl-insert-round-nut-m3-m12-threaded-insert-nut/)

Thread Repair & Solid Threaded Inserts

### [Hongniu Fasteners Stainless Steel Knurl Insert Round Nut M3-M12 Threaded Insert Nut for Wood, Plastic, Metal](https://engineeringhardware.com/product/hongniu-fasteners-stainless-steel-knurl-insert-round-nut-m3-m12-threaded-insert-nut/)

ODM/OEM · DIN, ANSI, GB, JIS, BSW

**US$0.06 – 6.00**MOQ 1 piece

[![Tee-Nuts, 1/4″-20 Inch Threaded Insert Choose Size/Quantity](https://img.engineeringhardware.com/Tee-Nuts-1-4-20-Inch-Threaded-Insert-Choose-Size-Quantity.webp)](https://engineeringhardware.com/product/tee-nuts-1-4-20-inch-threaded-insert-choose-size-quantity/)

Thread Repair & Solid Threaded Inserts

### [Tee-Nuts, 1/4″-20 Inch Threaded Insert Choose Size/Quantity](https://engineeringhardware.com/product/tee-nuts-1-4-20-inch-threaded-insert-choose-size-quantity/)

Round Head · DIN, ANSI, GB, JIS, GOST, BSW

**US$0.024 – 0.24**MOQ 10,000 pieces

[![Steel Wire Key Locking Threaded Inserts Product Type Thread Inserts](https://img.engineeringhardware.com/Steel-Wire-Key-Locking-Threaded-Inserts-Product-Type-Thread-Inserts.webp)](https://engineeringhardware.com/product/steel-wire-key-locking-threaded-inserts-product-type-thread-inserts/)

Thread Repair & Solid Threaded Inserts

### [Steel Wire Key Locking Threaded Inserts Product Type Thread Inserts](https://engineeringhardware.com/product/steel-wire-key-locking-threaded-inserts-product-type-thread-inserts/)

Common · Stainless Steel; Carbon Steel

**US$1.44 – 1.80**MOQ 1 piece

[![M6 Insert Star Type Nut Round Spring Threaded Tube Insert Sunflower Nuts](https://img.engineeringhardware.com/M6-Insert-Star-Type-Nut-Round-Spring-Threaded-Tube-Insert-Sunflower-Nuts.webp)](https://engineeringhardware.com/product/m6-insert-star-type-nut-round-spring-threaded-tube-insert-sunflower-nuts/)

Thread Repair & Solid Threaded Inserts

### [M6 Insert Star Type Nut Round Spring Threaded Tube Insert Sunflower Nuts](https://engineeringhardware.com/product/m6-insert-star-type-nut-round-spring-threaded-tube-insert-sunflower-nuts/)

CE · New

**Price on request**MOQ 10 pieces

[View all Thread Repair & Solid Threaded Inserts →](https://engineeringhardware.com/fastener-products/threaded-inserts-clinch-fasteners/thread-repair-solid-threaded-inserts/) [Full product catalog](https://engineeringhardware.com/products/)

## Applications & Industries

Anaerobic Threadlockers and Thread Sealants are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from low strength to retaining compound (inside diameter).

### Industries that specify Anaerobic Threadlockers and Thread Sealants

- **Field maintenance:** Securing set screws.
- **Machine assembly:** Fasteners that must not loosen.
- **Automotive:** Vibration-prone joints.
- **Hydraulics:** Tapered thread sealing.
- **Process & food equipment:** Sealing at joints that are cleaned and inspected.
- **Hydraulics & pneumatics:** Static and dynamic sealing in cylinders and valve bodies.

### Typical applications

- allowing the stated cure time before loading the joint
- choosing the grade by how the joint will be serviced
- degreasing both threads before applying
- using a sealant grade rather than a locking grade on pipe threads
- excluding dust and moisture from a housing
- sealing a joint against fluid or air pressure

### Service conditions to specify against

- **Sealed joints:** Used where the fixing has to keep water or air out as well as hold — the elastomer, not the fastener, decides service life.
- **Vibration:** Specified where cyclic load would loosen a plain nut or screw — rotating plant, rail, mobile equipment and anything that is not re-torqued in service.

### Where to use something else

- Do not use a high-strength grade on anything that will be serviced in the field; removing it needs heat, and heat is rarely available where the fastener has to come out.

[Full application guide: where Anaerobic Threadlockers and Thread Sealants are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/anaerobic-threadlockers/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### How much compression should NBR (Nitrile) anaerobic threadlockers and thread sealants see?

The groove or gland decides it, not the seal: a static radial seal is normally designed for roughly 15–30% compression on the section, and a dynamic one for less. Give us the groove dimensions and the pressure and we will confirm the section against them.

### What's the service temperature limit for NBR (Nitrile)?

The practical service range is approx. -30 °C to +100 °C.

### Are NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants magnetic?

NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants are non-magnetic.

### What corrosion resistance do NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants offer?

NBR (Nitrile) Anaerobic Threadlockers and Thread Sealants provide good resistance to mineral oil, grease and hydraulic fluid; poor in ozone and weathering with a service range of approx. -30 °C to +100 °C.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Anaerobic Threadlockers and Thread Sealants page](https://engineeringhardware.com/fastener/anaerobic-threadlockers/)

### More Anaerobic Threadlockers and Thread Sealants Guides