---
title: "PTFE O-Ring Seal"
description: "PTFE O-Ring Seal (polytetrafluoroethylene (thermoplastic, not an elastomer)): near-universal chemical resistance; no elastic recovery, so it is used as a"
url: https://engineeringhardware.com/guide/material/ptfe-cad-svg-159-oring/
source: Engineering Hardware & Fasteners
---

# PTFE O-Ring Seal

Seals · ISO / DIN

Temperature range, chemical and fluid compatibility, hardness and the full dimensional range for this compound.

PTFE O-Ring Seal are supplied to polytetrafluoroethylene (thermoplastic, not an elastomer). Corrosion behaviour is near-universal chemical resistance; no elastic recovery, so it is used as a back-up or energised seal, the material is non-magnetic, and the usable service range is approx. -200 °C to +260 °C. In practice this grade is chosen for chemical service and low friction rather than for elastic sealing.

- **Grade:** polytetrafluoroethylene (thermoplastic, not an elastomer)
- **Corrosion resistance:** Near-universal chemical resistance; no elastic recovery, so it is used as a back-up or energised seal
- **Magnetic response:** Non-magnetic
- **Service temperature:** approx. -200 °C to +260 °C

Property values are typical for the grade. Certified mechanical test data is available on request for production orders.

![PTFE O-Ring Seal reference image](https://engineeringhardware.com/wp-content/uploads/2026/06/O-Ring-Seal-—-ISO-DIN-Series-159-—-ISO-DIN.webp)

PTFE (polytetrafluoroethylene (thermoplastic, not an elastomer)) is chosen for chemical service and low friction rather than for elastic sealing. Specified on o-ring seal it determines the corrosion behaviour (near-universal chemical resistance; no elastic recovery, so it is used as a back-up or energised seal) and the service temperature range (approx. -200 °C to +260 °C); the dimensions are ours rather than a standard's, and are listed in full below.

## Why Choose PTFE for O-Ring Seal — ISO / DIN (Series 160)

Chosen for chemical service and low friction rather than for elastic sealing. For o-ring seal — iso / din (series 160), this matters when near-universal chemical resistance; no elastic recovery, so it is used as a back-up or energised seal is the primary requirement.

## Mechanical & Physical Properties

| Grade designation | polytetrafluoroethylene (thermoplastic, not an elastomer) |
| --- | --- |
| Magnetic response | Non-magnetic |
| Service temperature | approx. -200 °C to +260 °C |
| Corrosion characteristic | Near-universal chemical resistance; no elastic recovery, so it is used as a back-up or energised seal |

## Corrosion Behavior in Service

Carbon and alloy steel o-ring seal — iso / din (series 160) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.

## Galvanic & Galling Considerations

Galvanic and galling behavior do not apply to o-ring seal — iso / din (series 160) in PTFE — the relevant compatibility questions are chemical: confirm the elastomer against the fluid, the temperature and any cleaning agents in service, and check the gland or groove dimensions give the intended compression on the section.

## Sizes of O-Ring Seal — ISO / DIN (Series 160) Available in PTFE

| Inner diameter d1 (mm) | Outer diameter d2 (mm) | Wire dia (mm) | Working temp range | Reference standard |
| --- | --- | --- | --- | --- |
| 5 | 9 | 2 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 8 | 12 | 2 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 10 | 16 | 3 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 15 | 21 | 3 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 20 | 26 | 3 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 25 | 33 | 4 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 30 | 38 | 4 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 40 | 50 | 5 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 50 | 60 | 5 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 60 | 72 | 6 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 80 | 92 | 6 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 100 | 114 | 7 | -30 to +110 C | ISO 3601 / GB/T 3452 |

Dimensions are independent of the material: the table above lists the sizes supplied, and on this page every one of them is quoted in PTFE. The catalogue's default material column has been omitted here so it cannot be read as contradicting that.

Custom manufacturing · Made to drawing

## Need this seal in a grade that is not listed?

Ptfe is one of the grades the catalog describes. Inside diameter, cross-section and compound are the three that matter, and the compound is chosen against the fluid and the temperature rather than the dimensions.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom seal manufacturing](https://engineeringhardware.com/custom/seals/)[Send a drawing](https://engineeringhardware.com/custom/seals/#rfq)

## Technical Drawing

Dimensioned line drawing of 5 O-Ring Seal — ISO / DIN (Series 160). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Outer diameter d2 (mm):** 9
- **Wire dia (mm):** 2
- **Material:** NBR 70
- **Working temp range:** -30 to +110 C

## Dimensions & Specifications (ISO / DIN)

| Inner diameter d1 (mm) | Outer diameter d2 (mm) | Wire dia (mm) | Material | Working temp range | Reference standard |
| --- | --- | --- | --- | --- | --- |
| 5 | 9 | 2 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 8 | 12 | 2 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 10 | 16 | 3 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 15 | 21 | 3 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 20 | 26 | 3 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 25 | 33 | 4 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 30 | 38 | 4 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 40 | 50 | 5 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 50 | 60 | 5 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 60 | 72 | 6 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 80 | 92 | 6 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |
| 100 | 114 | 7 | NBR 70 | -30 to +110 C | ISO 3601 / GB/T 3452 |

Product catalog

## Related CAD O-Rings products

[![Superior Quality Polished/Electro Galvanized Duplex Head Nail/Double Head Nail From China Factory 12D](https://img.engineeringhardware.com/Superior-Quality-Polished-Electro-Galvanized-Duplex-Head-Nail-Double-Head-Nail-From-China-Factory-12D.webp)](https://engineeringhardware.com/product/superior-quality-polished-electro-galvanized-duplex-head-nail-double-head-nail-from-2/)

Common, Ring-Shank & Specialty Nails

### [Superior Quality Polished/Electro Galvanized Duplex Head Nail/Double Head Nail From China Factory 12D](https://engineeringhardware.com/product/superior-quality-polished-electro-galvanized-duplex-head-nail-double-head-nail-from-2/)

Connection · International

**US$720.00 – 960.00**MOQ 200 tons

[![Hot Dipped Galvanized Common Wire Nail, Flat Round Head, Custom Length, Construction Wood Common Iron Nail](https://img.engineeringhardware.com/Hot-Dipped-Galvanized-Common-Wire-Nail-Flat-Round-Head-Custom-Length-Construction-Wood-Common-Iron-Nail.webp)](https://engineeringhardware.com/product/hot-dipped-galvanized-common-wire-nail-flat-round-head-custom-length-construction/)

Common, Ring-Shank & Specialty Nails

### [Hot Dipped Galvanized Common Wire Nail, Flat Round Head, Custom Length, Construction Wood Common Iron Nail](https://engineeringhardware.com/product/hot-dipped-galvanized-common-wire-nail-flat-round-head-custom-length-construction/)

Common Nail · DIN, GB

**US$711.60**MOQ 1 ton

[![0.131″X3-1/2 in Paper Strip Nail 34 Degree Framing Nail](https://img.engineeringhardware.com/0-131-X3-1-2-in-Paper-Strip-Nail-34-Degree-Framing-Nail.webp)](https://engineeringhardware.com/product/0-131-x3-1-2-in-paper-strip-nail-34-degree-framing-nail/)

Common, Ring-Shank & Specialty Nails

### [0.131″X3-1/2 in Paper Strip Nail 34 Degree Framing Nail](https://engineeringhardware.com/product/0-131-x3-1-2-in-paper-strip-nail-34-degree-framing-nail/)

Strip Nail · GB

**Price on request**MOQ 1 piece

[![1 Inch to 6 Inch Polished Bright Common Wire Iron Nail](https://img.engineeringhardware.com/1-Inch-to-6-Inch-Polished-Bright-Common-Wire-Iron-Nail.webp)](https://engineeringhardware.com/product/1-inch-to-6-inch-polished-bright-common-wire-iron-nail/)

Common, Ring-Shank & Specialty Nails

### [1 Inch to 6 Inch Polished Bright Common Wire Iron Nail](https://engineeringhardware.com/product/1-inch-to-6-inch-polished-bright-common-wire-iron-nail/)

Common Nail · ANSI, DIN, GB, ISO, JIS

**US$696.00 – 960.00**MOQ 3 tons

[![Moisture Resistant Customization Flat Head Galvanized Common Wire Nail](https://img.engineeringhardware.com/Moisture-Resistant-Customization-Flat-Head-Galvanized-Common-Wire-Nail.webp)](https://engineeringhardware.com/product/moisture-resistant-customization-flat-head-galvanized-common-wire-nail/)

Common, Ring-Shank & Specialty Nails

### [Moisture Resistant Customization Flat Head Galvanized Common Wire Nail](https://engineeringhardware.com/product/moisture-resistant-customization-flat-head-galvanized-common-wire-nail/)

Common Nail · ANSI, DIN, GB, ISO, JIS

**US$664.80 – 1,496**MOQ 5 tons

[![Stainless Steel D Head Paper Strip Nails Diamond Point](https://img.engineeringhardware.com/Stainless-Steel-D-Head-Paper-Strip-Nails-Diamond-Point.webp)](https://engineeringhardware.com/product/stainless-steel-d-head-paper-strip-nails-diamond-point/)

Common, Ring-Shank & Specialty Nails

### [Stainless Steel D Head Paper Strip Nails Diamond Point](https://engineeringhardware.com/product/stainless-steel-d-head-paper-strip-nails-diamond-point/)

Paper Stripe Nails · DIN, ANSI

**US$1,199 – 1,679**MOQ 1,000 kilograms

[View all Common, Ring-Shank & Specialty Nails →](https://engineeringhardware.com/fastener-products/nails-staples-tacks/common-ring-shank-specialty-nails/) [Full product catalog](https://engineeringhardware.com/products/)

## Applications & Industries

O-Ring Seal are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from 5 to 100 (inside diameter).

### Industries that specify O-Ring Seal

- **Process & food equipment:** Sealing at joints that are cleaned and inspected.
- **Hydraulics & pneumatics:** Static and dynamic sealing in cylinders and valve bodies.

### Typical applications

- excluding dust and moisture from a housing
- sealing a joint against fluid or air pressure

### Service conditions to specify against

- **Sealed joints:** Used where the fixing has to keep water or air out as well as hold — the elastomer, not the fastener, decides service life.

Need help matching O-Ring Seal to your application? Send the assembly, the load and the environment with your enquiry and we will specify the size, material and finish against them.

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What hardness are PTFE O-Ring Seal — ISO / DIN (Series 160) supplied in?

Shore A 70 is the general-purpose default. A softer compound (around 60) seals better on a rough or slightly out-of-round surface; a harder one (around 80 to 90) resists extrusion at higher pressure or across a wider gap. State the hardness on the order — it is not implied by the material.

### Does PTFE have a shelf life?

Yes. Elastomers age in storage as well as in service — keep them cool, dark, dry and away from ozone sources such as electric motors, and use stock in the order it arrived. PTFE is the exception and does not age this way.

### How much compression should PTFE o-ring seal — iso / din (series 160) see?

The groove or gland decides it, not the seal: a static radial seal is normally designed for roughly 15–30% compression on the section, and a dynamic one for less. Give us the groove dimensions and the pressure and we will confirm the section against them.

### What's the service temperature limit for PTFE?

The practical service range is approx. -200 °C to +260 °C.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full O-Ring Seal — ISO / DIN (Series 160) page](https://engineeringhardware.com/fastener/cad-svg-160-oring/)

### More O-Ring Seal — ISO / DIN (Series 160) Guides
