---
title: "M10 Extra-Thick Flat Washers Dimensions"
description: "M10 Extra-Thick Flat Washers dimensions to Trade series (heavy-duty thick plain washers)."
url: https://engineeringhardware.com/guide/size/m10-extra-thick-flat-washers/
source: Engineering Hardware & Fasteners
---

# M10 Extra-Thick Flat Washers Dimensions

Washers · Trade series (heavy-duty thick plain washers)

Controlling dimensions to Trade series (heavy-duty thick plain washers), with tolerances and fit.

M10 Extra-Thick Flat Washers are dimensioned by Trade series (heavy-duty thick plain washers). The controlling dimensions, tolerance classes and assembly data are tabulated below.

Figures are nominal values from the governing standard. Confirm against the tolerance class for your application before machining or ordering.

![M10 Extra-Thick Flat Washers Dimensions reference image](https://engineeringhardware.com/wp-content/uploads/2026/09/Extra-Thick-Heavy-Duty-Flat-Washers.webp)

This page covers M10 Extra-Thick Flat Washers to Trade series (heavy-duty thick plain washers). M10 is the nominal bolt size; the dimensional row below is reproduced from the product table, followed by the tolerance, material and selection notes that apply to this size.

## M10 Dimensional Row (Trade series (heavy-duty thick plain washers))

| Bolt size | Material | Relative thickness | Purpose | Finish options |
| --- | --- | --- | --- | --- |
| M10 | carbon steel or stainless steel | greater than the standard plain washer | reduce local deformation under heavy clamping | zinc plated or plain |

## Mating Parts for M10

A M10 flat washer pairs with a M10 bolt/screw and matching M10 nut.

Custom manufacturing · Made to drawing

## Need extra-thick flat washers in a size this table does not list?

This page covers M10 extra-thick flat washers. Bearing area is usually the reason for a special washer: a larger outside diameter to spread load into a softer material, or a thicker section to resist dishing. Made by stamping or punching.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom washer manufacturing](https://engineeringhardware.com/custom/washers/)[Send a drawing](https://engineeringhardware.com/custom/washers/#rfq)

## Technical Drawing

Dimensioned line drawing of M10 Extra-Thick Flat Washers to Trade series (heavy-duty thick plain washers). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Material:** carbon steel or stainless steel
- **Relative thickness:** greater than the standard plain washer
- **Purpose:** reduce local deformation under heavy clamping
- **Finish options:** zinc plated or plain

## Dimensions & Specifications (Trade series (heavy-duty thick plain washers))

| Bolt size | Material | Relative thickness | Purpose | Finish options |
| --- | --- | --- | --- | --- |
| M10 | carbon steel or stainless steel | greater than the standard plain washer | reduce local deformation under heavy clamping | zinc plated or plain |
| M12 | carbon steel or stainless steel | greater than the standard plain washer | reduce local deformation under heavy clamping | zinc plated or plain |
| M16 | carbon steel or stainless steel | greater than the standard plain washer | increase bearing area on soft members | zinc plated or plain |
| M20 | carbon steel or stainless steel | greater than the standard plain washer | increase bearing area on soft members | zinc plated or plain |

Product catalog

## Related Extra-Thick Flat Washers products

[![Hebei Factory Concrete Formwork Tie Rod System Tie Rod Z Bar Washer Waler Plate for Construction](https://img.engineeringhardware.com/Hebei-Factory-Concrete-Formwork-Tie-Rod-System-Tie-Rod-Z-Bar-Washer-Waler-Plate-for-Construction.webp)](https://engineeringhardware.com/product/hebei-factory-concrete-formwork-tie-rod-system-tie-rod-z-bar-washer-waler-plate-for/)

Flat & Other Precision Washers

### [Hebei Factory Concrete Formwork Tie Rod System Tie Rod Z Bar Washer Waler Plate for Construction](https://engineeringhardware.com/product/hebei-factory-concrete-formwork-tie-rod-system-tie-rod-z-bar-washer-waler-plate-for/)

Wall Formwork · Steel

**US$0.71 – 2.39**MOQ 1,000 pieces

[![Window Sill Hotel Wall Lamp Corridor Decorative Building Wall Washer Light](https://img.engineeringhardware.com/Window-Sill-Hotel-Wall-Lamp-Corridor-Decorative-Building-Wall-Washer-Light.webp)](https://engineeringhardware.com/product/window-sill-hotel-wall-lamp-corridor-decorative-building-wall-washer-light/)

Flat & Other Precision Washers

### [Window Sill Hotel Wall Lamp Corridor Decorative Building Wall Washer Light](https://engineeringhardware.com/product/window-sill-hotel-wall-lamp-corridor-decorative-building-wall-washer-light/)

Remote or Not · Aluminum

**US$20.28 – 21.48**MOQ 20 pieces

[![Various Professional Hotel Washer Price Good (XGQ-100F)](https://img.engineeringhardware.com/Various-Professional-Hotel-Washer-Price-Good-XGQ-100F.webp)](https://engineeringhardware.com/product/various-professional-hotel-washer-price-good-xgq-100f/)

Flat & Other Precision Washers

### [Various Professional Hotel Washer Price Good (XGQ-100F)](https://engineeringhardware.com/product/various-professional-hotel-washer-price-good-xgq-100f/)

Vertical · 2 Years

**US$6,000**MOQ 1 piece

[![Hot DIP Galvanized Square Flat /Plain Washers](https://img.engineeringhardware.com/Hot-DIP-Galvanized-Square-Flat-Plain-Washers.webp)](https://engineeringhardware.com/product/hot-dip-galvanized-square-flat-plain-washers/)

Flat & Other Precision Washers

### [Hot DIP Galvanized Square Flat /Plain Washers](https://engineeringhardware.com/product/hot-dip-galvanized-square-flat-plain-washers/)

Flat Gasket · DIN,ASTM/ANSI JIS EN ISO,AS,GB

**US$0.012**MOQ 10,000 pieces

[![F2 264L Industrial Ultrasonic Cleaner Two Tank Fast Ship Engine Block Parts Washer](https://img.engineeringhardware.com/F2-264L-Industrial-Ultrasonic-Cleaner-Two-Tank-Fast-Ship-Engine-Block-Parts-Washer.webp)](https://engineeringhardware.com/product/f2-264l-industrial-ultrasonic-cleaner-two-tank-fast-ship-engine-block-parts-washer/)

Flat & Other Precision Washers

### [F2 264L Industrial Ultrasonic Cleaner Two Tank Fast Ship Engine Block Parts Washer](https://engineeringhardware.com/product/f2-264l-industrial-ultrasonic-cleaner-two-tank-fast-ship-engine-block-parts-washer/)

Ultrasonic Cleaning · CE, RoHS, FCC, EMC, LVD

**US$5,998**MOQ 1 piece

[![Pet Bottle Washer Filler Capper](https://img.engineeringhardware.com/Pet-Bottle-Washer-Filler-Capper.webp)](https://engineeringhardware.com/product/pet-bottle-washer-filler-capper/)

Flat & Other Precision Washers

### [Pet Bottle Washer Filler Capper](https://engineeringhardware.com/product/pet-bottle-washer-filler-capper/)

Volumetric Filling Machine · One Year

**US$14,400 – 60,000**MOQ 1 set

[View all Flat & Other Precision Washers →](https://engineeringhardware.com/fastener-products/washers/flat-other-precision-washers/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries for M10 Extra-Thick Flat Washers

Extra-Thick Flat Washers are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from M10 to M20 (nominal bolt size).

### Industries that specify Extra-Thick Flat Washers

- **Plant maintenance:** Replaces standard washers that have deformed in service.
- **Structural steelwork:** Thick washers resist dishing under high clamp load.
- **Heavy machinery:** A flat bearing face keeps preload in the joint.
- **Timber and composite:** Increased bearing area on soft members.
- **Rotating & vibrating plant:** Spring, tooth and wedge types that maintain or lock bolt tension.
- **Steel fabrication:** Spreading load under a head or nut and protecting the surface finish.

### Typical applications

- matching the bore to the bolt, not to the hole
- keeping the bearing face flat under a high-preload bolt
- increasing the bearing area on a soft or thin member
- replacing a standard washer that has dished
- spreading clamp load over a soft or oversized bearing face
- protecting a painted or plated surface under a turned nut

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Hardness matters:** Under a high-strength bolt a soft washer embeds into the joint and preload is lost — specify a hardened washer for structural bolting.

### Where to use something else

- Do not use an extra-thick washer to make up a gap in grip length; that is what a spacer or a longer bolt is for.

[Full application guide: where Extra-Thick Flat Washers are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/extra-thick-flat-washers/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What is the coarse-thread pitch of M10 for Extra-Thick Flat Washers?

For M10 the standard coarse pitch is 1.5 mm — this is the value used for Extra-Thick Flat Washers.

### What clearance and tapping drill suit M10?

Use a 11 mm clearance hole (ISO 273 medium) for through-fixing, or a 8.5 mm tapping drill for a coarse M10 thread.

### Which washer dimensions matter most for M10?

For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Extra-Thick Flat Washers page](https://engineeringhardware.com/fastener/extra-thick-flat-washers/)

### More Extra-Thick Flat Washers Guides