---
title: "M10 Wedge Anchors (Through-Bolt) Dimensions"
description: "M10 Wedge Anchors (Through-Bolt): coarse thread pitch 1.5 mm. Full size chart to Trade series (torque-controlled expansion anchor) with tolerances."
url: https://engineeringhardware.com/guide/size/m10-wedge-anchors/
source: Engineering Hardware & Fasteners
---

# M10 Wedge Anchors (Through-Bolt) Dimensions

Anchors & Concrete Fixings · Trade series (torque-controlled expansion anchor)

Controlling dimensions to Trade series (torque-controlled expansion anchor), with tolerances and fit.

M10 Wedge Anchors (Through-Bolt) dimensions to Trade series (torque-controlled expansion anchor): coarse thread pitch 1.5 mm.

- **Coarse thread pitch:** 1.5 mm

Figures are nominal values from the governing standard. Confirm against the tolerance class for your application before machining or ordering.

![M10 Wedge Anchors (Through-Bolt) Dimensions reference image](https://engineeringhardware.com/wp-content/uploads/2026/08/Wedge-Anchors.webp)

M10 Wedge Anchors (Through-Bolt) are manufactured to Trade series (torque-controlled expansion anchor). This page lists the controlling dimensions for the M10 size together with the installation notes for this type.

Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.

## M10 Dimensional Row (Trade series (torque-controlled expansion anchor))

| Thread size | Drill hole diameter (mm) | Embedment depth (mm) | Overall length (mm) | Max fixture thickness (mm) | Setting | Material | Base material |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M10 | 10 | 50 | 95 | 20 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |

Custom manufacturing · Made to drawing

## Need wedge anchors (through-bolt) in a size this table does not list?

This page covers M10 wedge anchors (through-bolt). Embedment depth, thread size, body length and corrosion protection are the variables; capacity remains a concrete design value, not a property of the anchor alone. Made by hot forging or thread rolling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom anchor & concrete fixing manufacturing](https://engineeringhardware.com/custom/anchors/)[Send a drawing](https://engineeringhardware.com/custom/anchors/#rfq)

## Technical Drawing

Dimensioned line drawing of M10 Wedge Anchors (Through-Bolt) to Trade series (torque-controlled expansion anchor). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Drill hole diameter (mm):** 10
- **Embedment depth (mm):** 50
- **Overall length (mm):** 95
- **Max fixture thickness (mm):** 20
- **Setting:** Torque-controlled
- **Material:** Zinc plated steel
- **Base material:** Cracked / uncracked concrete

## Dimensions & Specifications (Trade series (torque-controlled expansion anchor))

| Thread size | Drill hole diameter (mm) | Embedment depth (mm) | Overall length (mm) | Max fixture thickness (mm) | Setting | Material | Base material |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M8 | 8 | 40 | 75 | 15 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M10 | 10 | 50 | 95 | 20 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M12 | 12 | 60 | 110 | 25 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M16 | 16 | 75 | 145 | 30 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M20 | 20 | 90 | 180 | 35 | Torque-controlled | Hot-dip galvanised | Cracked / uncracked concrete |

Product catalog

## Related Wedge & Stud Anchors products

[![China Supplier Wholesale Exporter Yzp Carbon Steel Wedge Anchors](https://img.engineeringhardware.com/China-Supplier-Wholesale-Exporter-Yzp-Carbon-Steel-Wedge-Anchors.webp)](https://engineeringhardware.com/product/china-supplier-wholesale-exporter-yzp-carbon-steel-wedge-anchors/)

Wedge & Through-Bolt Anchors

### [China Supplier Wholesale Exporter Yzp Carbon Steel Wedge Anchors](https://engineeringhardware.com/product/china-supplier-wholesale-exporter-yzp-carbon-steel-wedge-anchors/)

Wedge Anchor · DIN, ANSI, GB, BSW, GOST

**US$816.00 – 1,440**MOQ 1 ton

[![Durable Carbon Steel HDG Wedge Anchor Bolt Metal Anchor Expansion Heavy Duty Anchor Bolt](https://img.engineeringhardware.com/Durable-Carbon-Steel-HDG-Wedge-Anchor-Bolt-Metal-Anchor-Expansion-Heavy-Duty-Anchor-Bolt.webp)](https://engineeringhardware.com/product/durable-carbon-steel-hdg-wedge-anchor-bolt-metal-anchor-expansion-heavy-duty-anchor/)

Wedge & Through-Bolt Anchors

### [Durable Carbon Steel HDG Wedge Anchor Bolt Metal Anchor Expansion Heavy Duty Anchor Bolt](https://engineeringhardware.com/product/durable-carbon-steel-hdg-wedge-anchor-bolt-metal-anchor-expansion-heavy-duty-anchor/)

Round Head · DIN, ANSI, GB, JIS

**US$0.048 – 0.16**MOQ 3,000 pieces

[![Stainless Steel 201 Flange Bolt/Carriage Bolt/Square Bolt/T Bolt/U Bolt/Bolts and Nuts/Through Bolt/Wedge Anchor](https://img.engineeringhardware.com/Stainless-Steel-201-Flange-Bolt-Carriage-Bolt-Square-Bolt-T-Bolt-U-Bolt-Bolts-and-Nuts-Through-Bolt-Wedge-Anchor.webp)](https://engineeringhardware.com/product/stainless-steel-201-flange-bolt-carriage-bolt-square-bolt-t-bolt-u-bolt-bolts-and/)

Wedge & Through-Bolt Anchors

### [Stainless Steel 201 Flange Bolt/Carriage Bolt/Square Bolt/T Bolt/U Bolt/Bolts and Nuts/Through Bolt/Wedge Anchor](https://engineeringhardware.com/product/stainless-steel-201-flange-bolt-carriage-bolt-square-bolt-t-bolt-u-bolt-bolts-and/)

T Head · DIN, ANSI, GB, JIS, BSW

**US$0.36 – 1.20**MOQ 1,000 pieces

[![Made in China Fastener Factory Grade 4.8/8.8 Zinc Plated Anchor / Sleeve Anchor with Hex Bolt Flat Washer/ Bolt Anchor / Wedge Anchor Bolt](https://img.engineeringhardware.com/Made-in-China-Fastener-Factory-Grade-4-8-8-8-Zinc-Plated-Anchor-Sleeve-Anchor-with-Hex-Bolt-Flat-Washer-Bolt-Anchor-Wedge-Anchor-Bolt.webp)](https://engineeringhardware.com/product/made-in-china-fastener-factory-grade-4-8-8-8-zinc-plated-anchor-sleeve-anchor-with/)

Wedge & Through-Bolt Anchors

### [Made in China Fastener Factory Grade 4.8/8.8 Zinc Plated Anchor / Sleeve Anchor with Hex Bolt Flat Washer/ Bolt Anchor / Wedge Anchor Bolt](https://engineeringhardware.com/product/made-in-china-fastener-factory-grade-4-8-8-8-zinc-plated-anchor-sleeve-anchor-with/)

Steel · ISO

**US$0.12 – 1.20**MOQ 1,000 pieces

[![Three-Piece Heavy Duty Expansion Anchor Bolt, Combination Expansion Bolt for Construction](https://img.engineeringhardware.com/Three-Piece-Heavy-Duty-Expansion-Anchor-Bolt-Combination-Expansion-Bolt-for-Construction.webp)](https://engineeringhardware.com/product/three-piece-heavy-duty-expansion-anchor-bolt-combination-expansion-bolt-for/)

Wedge & Through-Bolt Anchors

### [Three-Piece Heavy Duty Expansion Anchor Bolt, Combination Expansion Bolt for Construction](https://engineeringhardware.com/product/three-piece-heavy-duty-expansion-anchor-bolt-combination-expansion-bolt-for/)

Wedge Anchor · Carbon Steel

**US$0.036 – 0.36**MOQ 1,000 pieces

[![Carbon Steel Wedge Anchor Throughbolt Expansion Concrete Fastener Zinc Building Material](https://img.engineeringhardware.com/Carbon-Steel-Wedge-Anchor-Throughbolt-Expansion-Concrete-Fastener-Zinc-Building-Material.webp)](https://engineeringhardware.com/product/carbon-steel-wedge-anchor-throughbolt-expansion-concrete-fastener-zinc-building/)

Wedge & Through-Bolt Anchors

### [Carbon Steel Wedge Anchor Throughbolt Expansion Concrete Fastener Zinc Building Material](https://engineeringhardware.com/product/carbon-steel-wedge-anchor-throughbolt-expansion-concrete-fastener-zinc-building/)

ANSI, BSW, DIN, GB, ASME · Stainless Steel

**US$0.012 – 0.12**MOQ 1,000 pieces

[View all Wedge & Through-Bolt Anchors →](https://engineeringhardware.com/fastener-products/anchors-construction-fixings/wedge-through-bolt-anchors/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries for M10 Wedge Anchors

Wedge Anchors are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from M8 to M20.

### Industries that specify Wedge Anchors

- **Machine hold-down:** Anchoring plant that transmits vibration into the floor.
- **Safety barriers & racking:** Bollards, guard rail and pallet racking feet.
- **Structural steel to concrete:** Column base plates and bracket fixings in a concrete slab.
- **Fit-out & drylining:** Fixings into board, block and hollow wall.
- **Construction & structural:** Base plates, brackets and steelwork fixed to concrete.
- **Building services:** Suspending tray, duct, pipe and sprinkler runs from a soffit.

### Typical applications

- set by tightening the nut to a stated setting torque
- hole diameter equals the anchor diameter
- through-fixing a steel fixture into concrete
- fixing a steel fixture through to a solid substrate
- suspended services on threaded rod
- making a load-bearing threaded fixing in concrete or masonry

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Exterior structural:** Hot-dip galvanised options for external steelwork; allow for the thicker coating in the mating thread.
- **Hole preparation:** Drilled diameter, depth and cleanliness are part of the specification; an uncleaned hole is the single most common cause of a failed anchor.
- **The concrete governs:** Capacity is a property of the base material and the geometry — grade, edge distance, spacing and cracked or uncracked — not of the anchor alone. Work to the anchor manufacturer's ETA or ICC-ES report.

### Where to use something else

- Not for a substrate the type is not qualified in — an expansion anchor near an edge or in hollow block will split it.

[Full application guide: where Wedge Anchors are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/wedge-anchors/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What is the coarse-thread pitch of M10 for Wedge Anchors (Through-Bolt)?

For M10 the standard coarse pitch is 1.5 mm — this is the value used for Wedge Anchors (Through-Bolt).

### What clearance and tapping drill suit M10?

Use a 11 mm clearance hole (ISO 273 medium) for through-fixing, or a 8.5 mm tapping drill for a coarse M10 thread.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Wedge Anchors (Through-Bolt) page](https://engineeringhardware.com/fastener/wedge-anchors/)

### More Wedge Anchors (Through-Bolt) Guides